adastra BG5A Active Stereo Speaker Set User Manual
- June 12, 2024
- Adastra
Table of Contents
adastra BG5A Active Stereo Speaker Set User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
The BG5A stereo speaker set comprises a powered speaker with inbuilt amplifier and a satellite speaker to provide full range stereo output from any line level audio source.
Connection and setup
Both active and passive speaker units are supplied with a wall mounting bracket and may be fixed vertically or horizontally as required. Ensure that wall fixings are sufficient to hold the weight of each unit and add a safety wire if mounting overhead where a falling speaker could be hazardous.
A speaker wire is provided to link the main active speaker output (6) to the satellite speaker “+” and “-” terminals.
Ensure that the power switch (1) is set to OFF. Power is provided by an included 12Vdc in-line power adaptor, which should be connected to a mains outlet using the supplied fig.8 mains lead (or equivalent) and the DC plug connected to the DC input on the main active speaker (2)
Connect the line level audio input to either the 3.5mm socket (4) or the L+R
RCA inputs (5)
Operation
With the volume control (3) turned fully down, switch the power on (1) and play the audio signal into the main speaker. Gradually increase the volume setting until the required level is reached. Check that sound is produced through both the main speaker and satellite speaker, and if not, switch off and check connections before trying again.
Specifications
| Power supply | 12Vdc, 3A (in-line mains adaptor included) |
|---|---|
| Output power: RMS | 2 x 20W |
| DC input connection | 5.5 x 2.5mm DC jack |
| Mains input | Fig.8 (into 12Vdc adaptor) |
| Drivers | 125mmØ (5“) full-range (reinforced paper cone) |
| Frequency response | 100Hz – 20kHz |
| Sensitivity @ 1W/1m | 85dB |
| Impedance | 8 ohms (each full-range driver) |
| Input | L+R RCA or 3.5mm stereo (line level) |
| Controls | On/off switch, volume rotary |
| Dimensions: speaker | 227.5 x 156 x 152.5mm (HxWxD) each |
| Weight (per set) | 3.274kg |
Disposal: The “Crossed Wheelie
Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or
commercial waste at the end of its useful life. The goods must be disposed of
according to your local council guidelines.
Errors and omissions excepted. Copyright© 2023.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New
Mallow Road, Cork, Ireland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>