EVEDMOT Commercial 8 Channels Digital Kitchen Timer Instructions
- June 15, 2024
- EVEDMOT
Table of Contents
EVEDMOT Commercial 8 Channels Digital Kitchen Timer
Product Specification
| Long (INCH) | Width (INCH) | High (INCH) | Voltage | Power | Number of groups |
|---|---|---|---|---|---|
| 12.6 | 4.5 | 1.5 | AC110V | 3W | 8 |
Product Introduction
The EVEDMOT Eight-channel Timer provides 8 time display windows with independent timer function. Each timer group contains 1 total time + 3 shake basket time.
Operation Panel:
- A: The first timer display group
- B: ON/OFF button of the first timer display group
- C: The eighth timer display group
- D: ON/OFF button of the eighth timer display group
- E: Total time setting button
- F: Shaking basket setting button
- G: Total ON/OFF power button
- H: INCREASE button (Increase time or volume)
- I: DECREASE button (Decrease time or volume)
- J: Left and right wall ears can be screwed out to make the
machine stand or fixed on the wall
Precautions
- The timer housing is made of stainless steel. Just wipe with a damp cloth. Do not rinse with water. This timer is not waterproof.
- Use fingers to touch the buttons instead of nails or other hard objects in order to avoid scratching the panel or buttons.
- The ears on both sides can be screwed out to make the machine stand or hanging on the wall. When installed on the wall, use expansion bolts to fix the left and right ears first and theninstall the timer machine to the ears.
- Please refer to the manual before use. If you have any questions, please contact us.
Operation Instruction:
To operate the EVEDMOT Eight-channel Timer, follow these steps:
- Press the ON/OFF button (B) of the desired timer display group (A or C) to activate or deactivate it.
- To set the total time for a timer display group, press the Total time setting button (E). Use the INCREASE button (H) and DECREASE button (I) to adjust the time value. Press the Total timesetting button (E) again to confirm.
- To set the shake basket time for a timer display group, press the Shaking basket setting button (F). Use the INCREASE button (H) and DECREASE button (I) to adjust the time value. Press the Shaking basket setting button (F) again to confirm.
- To turn on or off all timers simultaneously, press the Total ON/OFF power button (G).
FAQ
Q: Is the timer waterproof?
A: No, the timer is not waterproof. Do not rinse it with water.
Q: How should I clean the timer?
A: The timer housing is made of stainless steel. Simply wipe it with a damp cloth
Q: Can I use nails or other hard objects to press the buttons?
A: No, it is recommended to use fingers to touch the buttons to avoid scratching the panel or buttons.
Q: How can I install the timer on the wall?
A: The left and right wall ears can be screwed out to make the machine stand or fixed on the wall. When installing on the wall, use expansion bolts to fix the left and right ears first, and then install the timer machine to the ears.
Q: Where can I find more information?
A: Please refer to the manual for detailed instructions. If you have any questions, please contact us.
Product Specification
Specification (INCH)| ****
Power
| Number
of groups
---|---|---
Long| width| high| Voltage
12.6| 4.5| 1.5| AC110V| 3W| 8
Precautions
- The timer housing is made of stainless steel. Just wipe with a damp cloth. Do not rinse with water. This timer is not waterproof.
- Use fingers to touch the buttons instead of nails or other hard objects in order to avoid scratching the panel or buttons.
- The ears on both sides can be screwed out to make the machine stand or hanging on the wall. When installed on the wall, use expansion bolts to fix the left and right ears first and then install the timer machine to the ears.
- Please refer to the manual before use. If you have any questions, please contact us.
Product Introduction
- Provide 8 time display windows with independent timer function.
- Each timer group contains 1 total time + 3 shake basket time, the time setting range from 00:00 to 99:59 minutes or 00:00 to 99:59 hours. Each time period has an alarm alert function. If you do not need shake basket function, you can set all three shake basket time group to 00:00.
- Volume can be adjusted by INCREASE/DECREASE button, and the volume you set is automatically stored in the memory so you don’t need to adjust again when you use next time.
- When there is a timer group running, you can also set the time for other groups at the same time without conflict, and if you want to adjust the running group, just return to the running group button then you will enter the setting interface.
- The surface of the panel has a protective film to prevent collision or scratch during production and transportation. It can be torn off or it can be torn after the surface is dirty, so that the panel will always remain clean and new.
- It is all stainless steel and able to withstand the kitchen oil erosion. It will not rust and can be used for many years.
- The whole circuit adopts low-power consumption design. Lead-free and environmental-friendly.
Operation Panel
- A : The first timer display group
- B : ON/OFF button of the first timer display group
- C : The eighth timer display group
- D : ON/OFF button of the eighth timer display group
- E : Total time setting button
- F : Shaking basket setting button
- G : Total ON/OFF power button
- H : INCREASE button (Increase time or volume )
- I : DECREASE button (decrease time or volume)
- J : Left and right wall ears can be screwed out to make the machine stand or fixed on the wall
Operation Instruction
-
ON/OFF: Power on, the buzzer make a sound “Di” once. It means the initialization is finished. Lightly press ON/OFF button then you can hear “Di” at this time and all the display windows show “8” for 3 seconds. This step is to test whether the time segment is broken or not. After 3 seconds, “Di” comes and all come to normal data. If under power on, press ON/OFF button for 2 seconds, it will “Di” and power off.
-
TOTAL TIME SETTING: press TIME button to enter/exit the total TIME setting. When the display groups enter the total time setting interface, press the number button 1 to 8 of the display group that needs to be set, then the group enters the setting mode and the time data flickers, press the INCREASE/DECREASE button to adjust time. After setting up the time for this group and the date will save automatically and you can change to another group to continue time setting.
-
START/STOP: After setting up the time well, press number button(1-8) and the corresponding time starts to count down and the middle colon flickers. When it’s working, long-press number button, the corresponding timer stops working and the time data back to initialization.
-
REMINDER FUNCTION: Press REMINDER button to enter the shaking basket setting. “Di” sound comes once, and the display window which is not working will show “AL-1”,you can set the shake basket time you need and press REMINDER button. It will “Di” and pass to another group which shows “AL-2”. After setting the shake basket time, press REMINDER button to pass to “AL-3”. After all finished, press REMINDER button to exit.
-
REMINDING OF SHAKE BASKET TIME: when the timer group working and the shake basket time is up, the corresponding display window will show “AL-1”(AL-2, AL-3) in a glitter way, at the meantime, there will be a long buzz. Just press the corresponding number button to end this alarm, then
the display window will go on counting down. -
REMINDEING OF THE TOTAL FINISHING TIME: when the total time count down to 00:00, the display window will show “end” in a glitter way, at the meantime, there will be an intermittent buzz alarm. Just press the corresponding number button to end this alarm and this timer group also ends.
-
ADJUSTMENT OF VOLUME: when the timer groups are not in setting mode, press INCREASE/DECREASE button to adjust volume.
-
HH:MM” MODE AND “MM:SS” MODE: in the shutdown status, press “TIME” button for 3 seconds, “Di” sound comes and enter into the mode switch. The default mode is “minute/second” mode(MM:SS). Press the corresponding number button to change from “minute/second” mode(MM:SS) to “hour/minute” mode(HH:MM) for this timer group, then press DECREASE button to save and exit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>