SATCO S49390 Hi-Pro LED Medium Lamp Instructions
- June 5, 2024
- SATCO
Table of Contents
SATCO S49390 Hi-Pro LED Medium Lamp
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT:
Read before installing the fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
- Luminaire wiring and electrical parts may be damaged when drilling for the installation of LED retrofit. Check for enclosed wiring and components.
- LED Retrofit installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Install this lamp only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit does not exceed the input rating of the luminaire.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Disable all power to the Luminaire. The lamp holder must be disconnected from the wiring to the ballast, capacitor, or ignitor. Verify that voltage does not exceed 277V AC. Please see “Wiring Diagram”.
- Failure to follow instructions can result in a damaged product and will void the warranty. It could also result in an electric shock or fire.
IMPORTANT
- The added weight of the device may cause instability of a free-standing portable luminaire.
- Installers should not disconnect existing wires from lamp holder terminals to make new connections at lamp holder terminals. Instead, installers should cut existing lamp holder leads away from the lamp holder and make new electrical connections to lampholder lead wires by employing applicable connectors.
INSTALLATION
- STEP 1: Turn off the power before installation.
- STEP 2: Remove the old Ballast, Capacitor, and Ignitor (if existing).
- STEP 3: Make sure Alternating Current Wires connect to the socket directly. Reattach or replace ground lead (if necessary).
- STEP 4: Screw the LED lamp into the corresponding socket. Attach the retrofit label to the luminaire.
WIRING DIAGRAM
Replacing CFL Lamp
NOTES:
For 100-277 Volts applications with two hot leads, connect the second hot
lead to terminal N (L1).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>