R V R AUD2P1 Broadcast Systems Stations Accessories User Manual
- June 13, 2024
- R V R
Table of Contents
CHANGEOVER ACCESSORIES
AUD – SCM – RDS
CHANGEOVER ACCESSORIES
AUD – SCM – RDS
MODELS
AUD2P1 AUD2MP1 SCM-AUD
AUD6/1 AES6/1 RDS6/1
To ensure the continuity of transmission of the transmitting equipment, RVR
produces various models of changeover units for the control of redundant
configurations in 1 + 1 and N + 1 up to 6 + 1.
By integrating coaxial relays, distributors and Audio, MPX and RDS routers, it
is thus possible to manually or automatically switch the reserve transmission
in case of failure of one of the main ones. Depending on the architecture of
the transmitting site, dedicated models are available.
ORDERING INFORMATION
| Model | Description |
|---|---|
| AUD2P1 | The audio splitter system allows you to split the audio signal in |
input and redistribute it on multiple outputs.
AUD2MP1| The audio splitter system allows you to split the audio signal in
input and redistribute it on multiple outputs.
OPTION|
AUD2MP1/V1| 2-Way passive audio distriution system for MPX/DIGITAL/L&R
signals.
AUD2MP1/V2| 2-Way passive audio distriution system for MPX+RDS/D161TALOR
signals.
AUD2MP1N3| 2-Way passive audio distriution system for MPX+RDS+SCAUDIGITALOR
signals.
AUD2MP1N4| 2-Way passive audio distriution system for MPX+RDS+SCA1-2/DIGITALOR
signals.
SCM-AUD| Passive analog audio signal switch unit for SCMLCDN+1 changeover.
SCM-AES/EBU| Passive AES/EBU audio signal switch unit for SCMLCDN+1
changeover.
AUD6/1| Passive analog audio signal switch unit for SCM6/1 changeover.
AES6/1| Passive AES/EBU audio signal switch unit for SCM6/1 changeover.
RDS6/1| Passive MPX, RDS, Pilot signals switch unit for SCM6/1 changeover.
AUD2MP1
Accessory – Audio Distributor System.
https://www.rvr.it/it/products/components/audio-equipments/aes-ebu- distributor-systems/aud2mp1/
SCM-AUD
Accessory for SCMLCDN+1.
https://www.rvr.it/it/products/components/changeover-units-system/4-1 -changeover-system/scm-aud/
SCM-AES/EBU
Accessory for SCMLCDN+1.
AUD6/1
Accessory for SCM6/1.
https://www.rvr.it/it/products/components/changeover-units-system/change- over/aud6-1/
AES6/1
Accessory for SCM6/1.
https://www.rvr.it/it/products/components/changeover-units-system/change- over/aes6-1-aes6-1/
RDS6/1
Accessory for SCM6/1.
https://www.rvr.it/it/products/components/changeover-units-system/change- over/rds6-1/
SCM-AUD
| Parameters | Value | Notes |
|---|
GENERALS
Ambient working temperature| | -10 °C to + 50 °C / 95%| Relative
humidity non condensing
POWER REQUIREMENTS
AC Power input
| AC Supply Voltage| | 80 – 260 VAC| Full Range Monophase
Active Power Consumption| | 5W|
Connector| | VDE IEC Standard|
Phisical dimensions L x H x W| mm / inch| 483 / 19| EIA rack
---|---|---|---
mm / inch| 44 / 3 1/2| 1HE
Weight| kg| About 1,4|
Cooling| | Convection cooling|
Acoustic noise| dBA| 0|
AUDIO INPUTS
L &R (from 1 to 4)
| Connector| | XLR female Balanced|
Passthrough Gain| | ±7dB adjustable|
Impedance| | 10K-600-2K Ω selectable|
Maximum input level| dBu| 20|
MPX & PILOT
| Connector| | BNC Unbalanced|
Passthrough Gain| | ±7dB adjustable|
Impedance| | 50 – 10K Ω selectable|
Maximum input level| dBu| 14|
OUTPUTS
L &R **(from 1 to 4) L &R Reserve**| Connector| | XLR male Balanced|
Maximum Level| dBu| 20|
Load| | > 2K Ω|
MPX & PILOT
| Connector| | BNC Unbalanced|
Maximum Level| dBu| 14|
Load| | > 50 Ω|
INTERFACES
Signalling LED| | Yes|
COMMAND| IN| | DB25 Female (SCMLCDN+1 interface)|
OUT| | DB25 Male (SCM-AES/EBU interface)|
FUSES
On mains| | 1 External fuse F 315 mA – 5X20 mm|
SCM-AES/EBU
| Parameters | Value | Notes |
|---|
GENERALS
Ambient working temperature| | -10 °C to + 50 °C / 95%| Relative
humidity non condensing
POWER REQUIREMENTS
AC Power input
| AC Supply Voltage| | 80 – 260 VAC| Full Range Monophase
Active Power Consumption| | 1W|
Connector| | VDE IEC Standard|
Phisical dimensions L x H x W| mm / inch| 483 / 19| EIA rack
---|---|---|---
mm / inch| 44 / 3 1/2| 1HE
Weight| kg| About 1,4|
Cooling| | Convection cooling|
Acoustic noise| dBA| 0|
AUDIO INPUTS
L &R (from 1 to 4)
| Connector| | XLR female Balanced|
Data Formats| | AES/EBU|
Impedance| | 110 Ω|
OUTPUTS
| Connector| | XLR male Balanced|
AES/EBU (from 1 to 4) & Reserve Data Formats| | AES/EBU|
| Impedance| | 110 Ω|
INTERFACES
Signalling LED| | Yes|
COMMAND IN| | DB25 Female (SCMLCDN+1 or SCM-AUD interface)
FUSES
On mains| | 1 External fuse F 315 mA – 5X20 mm|
AES6/1
| Parameters | Value | Notes |
|---|
GENERALS
__Ambient working temperature| | -10 °C to + 50 °C / 95%| Relative
humidity non condensing
MECHANICAL DIMENSIONS
Phisical dimensions L x H x W| mm / inch| 483 / 19| EIA rack
mm / inch| 88 / 3 1/2| 2HE
Weight| kg| About 0,5|
Cooling| | Convection cooling|
Acoustic noise| dBA| 0|
AUDIO INPUTS
L &R (from 1 to 6)| | Connector| XLR female Balanced
MPX| | Connector| BNC Unbalanced
OUTPUTS
L &R (from 1 to 6) & L&R Reserve| | Connector| XLR male Balanced
MPX| | Connector| BNC Unbalanced
INTERFACES
Signalling LED| | | Power| 1 Green
| | Position| 6 Yellow
COMMAND| | | IN| DB25 Female (SCM6/1 interface)
| | OUT| DB25 Male (RDS6/1 interface)
RDS6/1
| Parameters | Value | Notes | |
|---|---|---|---|
| GENERALS | |||
| Ambient working temperature | -10 °C to + 50 °C / 95% | Relative humidity non |
condensing
MECHANICAL DIMENSIONS| | 483| EIA rack
Phisical dimensions
L x H x W| mm / inch
mm / inch| 483483| 1HE
Weight| kg| 88 / 3 1/2|
Cooling| | About 0,5|
Acoustic noise| dBA| Convection cooling|
AUDIO INPUTS| | 0|
PILOT (from 1 to 6)| | |
RDS (from 1 to 6)| | Connector| BNC Unbalanced
SCA (from 1 to 6)| | Connector| BNC Unbalanced
OUTPUTS| | Connector| BNC Unbalanced
PILOT (from 1 to 6) & Reserve| | |
RDS (from 1 to 6) & Reserve| | Connector| BNC Unbalanced
SCA (from 1 to 6) & Reserve| | Connector| BNC Unbalanced
INTERFACES| | Connector| BNC Unbalanced
Signalling LED| | Power
Position| 1 Green
6 Yellow
COMMAND| | IN| DB25 Female (AUD6/1 interface) or (AES6/1 interface)
All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice.
R.V.R. Elettronica S.r.l.
Via del Fonditore, 2/2c
40138 Bologna Italy
Phone +39 0516010506
Fax +39 0516011104
sales@rvr.it
www.rvr.it
https://www.rvr.it ISO 9001
R.V.R. Elettronica S.r.l.
Via del Fonditore 2/2
40138 Bologna – ltaly
Phone +39 0516010506
sales@rvr.it
www.rvr.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>