Nedis BACCH02 Automatic Lead Acid Charger User Manual
- June 5, 2024
- nedis
Table of Contents
Nedis BACCH02 Automatic Lead Acid Charger
User Manual
Preface
Thank you for purchasing the Nedis BACCH02.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The Nedis BACCH02 is a charger for 2, 6 and 12 V lead-acid rechargeable batteries.
This product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
This product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farm houses, by clients in hotels, motels and other residential type environments and/or in bed and breakfast type environments.
Before using the charger, check the instruction manual supplied with the battery for the correct operation instructions.
Specifications
Product
|
Automatic Lead Acid Charger
---|---
Article number
|
BACCH02
Dimensions (l x w x h)
|
100 × 71 × 58 mm
Weight
|
710 g
Input voltage
|
230 VAC ; 50 Hz
Output voltage
|
2.3, 6.9 and 13.8 VDC lead-acid rechargeable batteries
Capacity
|
8, 10 or 7 Ah
Charging voltage
|
2, 6 or 12 VDC
Charging time
|
14, 17, or 12 hours
Charging current
|
Max. 600 mA ; depending on the condition and capacity of the battery.
Polarity
|
Red (+) ; Black (-)
Power consumption
|
22 W
Operating humidity
|
10 % – 90 %
Operating temperature
|
0 °C – 35 °C
Storage humidity
|
5 % – 95 %
Storage temperature
|
-10 °C – 55 °C
Temperature while charging
|
Max. 75 °C
Main parts (image A)
A
1. Polarity indicator LED
2. Charge indicator LED
3. Power cable
4. Voltage slider
5. Red battery clamp (+)
6. Black battery clamp (-)
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- Do not use a damaged or defective product, but return it for repair or replacement.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Unplug the product from the power source and other equipment if problems occur.
- Make sure the power cable is positioned in a way that prevents tripping or falling.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Do not leave a battery on prolonged charge when not in use.
- Disconnect the power supply before making or breaking the connections to the battery.
- Do not let the power cable touch hot surfaces.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not immerse the product in water for cleaning.
- Do not expose the product to water or moisture.
- Stop the charging process if the product gets too warm (> 75 °C).
- Only power the product with the voltage corresponding to the markings on the product.
- Wipe the battery terminals with a clean dry cloth if they are dirty.
- During charging, the battery must be placed in a well-ventilated area.
- Non-rechargeable batteries are not to be recharged.
- Do not short-circuit a battery.
- When the product is not in use, disconnect it and store in a safe, dry place, out of reach from children.
- Children of less than 8 years should be kept away.
- Cleaning and user maintenance shall not be done by children without supervision.
Safety symbols on the product
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Use
Charging the battery (image B)
B
- Make sure to match the charger voltage to the voltage on the battery markings. Wrong voltage can destroy the charger and/or battery.
- Always keep the wires away from the battery and fuel line.
- The security circuit ensures that there is no voltage at the battery clamps when there is no battery connected.
- The battery recharging time is variable depending on the condition and capacity of the battery.
1. Slide the voltage slider A4 to the correct charging voltage.
- The charging voltage varies per battery. Check the markings on the battery for the correct charging voltage.
- Make sure to match the (+) and (-) polarity markings.
2. Connect the red battery clamp (+) A5 to the (+) terminal of the battery.
3. Connect the black battery clamp (-) A5 to the (-) terminal of the battery.
4. Connect the power cable A3 to a power outlet.
5. If the polarity indicator LED A1 lights up red, A5 and/or A6 are not connected correctly. To fix this, follow these steps:
a. Unplug A3 from the power outlet.
b. Reconnect A5 and/or A6.
c. Connect A3 to a power outlet.
Charging starts automatically.
- The charge indicator LED A2 lights up.
Disconnect the charger
- A2 switches off when the battery is fully charged.
When the connected battery is fully charged, the current will be reduced to prevent overcharging and gas development. This allows the battery to stay connected to the charger for a longer period without damaging the battery.
- It is still recommended to disconnect the charger when the battery is fully charged.
1. Unplug A3 from the power outlet when the battery is fully charged.
2. Disconnect A5 and A6 from the terminals of the battery.
Maintenance
- Before cleaning and maintenance, switch off the product and disconnect the power.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Do not clean the inside of the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Dispose the battery charger separate from the cables and clamps.
For more detailed information about disposal of your old battery, check the local rules and regulations for the correct disposal instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>