Sharper Image Steering Wheel Bluetooth Speakerphone User Guide
- June 7, 2024
- Sharper Image
Table of Contents
STEERING WHEEL BLUETOOTH
SPEAKERPHONE
Item No. 206909
User Guide
Thank you for purchasing the Sharper Image Steering Wheel Bluetooth Speakerphone. Please read this guide and store it for future reference.
APPEARANCE AND STRUCTURE
1. Power On/Off switch
2. MIC hole
3. Pairing/MIC mute
4. Answer/End/Reject/Redial/Language choice
5. Decrease volume
6. USB port for software updates and charging
7. Built-in speaker
8. Steering wheel fixed bracket
9. Red/Blue indicator
10. Increase volume
11. Hands-free/Cell phone switching
FEATURES
1. Easily mounts on any steering wheel
2. DSP technology, Full duplex, CVC noise and echo suppression
3. Support TTS function
4. Support MIC mute function
5. Answer/End/Reject a call, last call redialing and call switch
6. Support A2DP function (can play cell phone music)
7. Built-in microphone
8. Built-in Li-ion battery
9. USB port for software updates and charging
10. Connects automatically when power is on
11. Supports dual standby
INSTALLATION
Fix the device directly on the steering wheel.
1. Please attach the product to the bracket first.
2. Next, install the product bracket to the steering wheel.
OPERATION
When using your Steering Wheel Bluetooth Speakerphone for the first time, your
cell phone must pair with it. Please refer to the user manual of your cell
phone for specific details on Bluetooth connectivity.
A. Power on and long press button for
3 seconds to enter pairing mode. While red and blue indicator lights flash,
activate your cell phone’s Bluetooth function, and search for the “CAR KIT”
device on your phone.
B. Select “CAR KIT” device.
C. Enter the passcode “0000”.
D. Select “CAR KIT” from the list on the cell phone paired device, then select
“connection.”
Upon completion, a voice reminder will confirm that the first cell phone has
successfully been paired. Only a blue light should flash now.
PAIRING THE SECOND PHONE
Press the button for 3 seconds to enter pairing mode. Red and blue lights flash
in turn. Now, pair your second phone the same way you paired the first.
Note : When connecting the second phone, the device will disconnect from
the first cell phone automatically. After you succeed in connecting the
second, please turn on the Bluetooth function of the first one again. There
will be the prompt “Connect CAR KIT or not?” on it. Select “Connect,” so that
two cell phones are connected to the same Bluetooth hands-free device. Or,
restart the device after the second cell phone is connected. Two cell phones
can also be connected to the same Bluetooth handsfree device.
FEATURES AND OPERATION
1. Power On/Off
When connected, dial a phone number directly on your cell phone. Your voice
will automatically come through via Bluetooth hands free. The device will
return to Standby mode after you hang up.
2. Hands-free talking
2.1 Receiving a call
When connected and you have an incoming call, the device will report who is
calling via caller ID automatically. Press the button to answer. You’ll return
to standby mode after hanging up.
2.2 Rejecting a call
Press the button for 3 seconds to reject an incoming call.
2.3 Microphone mute
When using Bluetooth hands-free and you don’t want the other party to hear
your voice, press the button and the microphone will mute. Press the button
again and it will unmute, allowing your voice to once again be heard by the
other party.
3. Phone call back
When connected, you can press the button for 3 seconds to re-dial the last
number you called.
4. Volume adjustment
While the power is on, short press the “+” and “-” buttons to adjust to your
desired volume. A voice will prompt “Highest volume” and “Lowest volume.”
5. Switching to hands free during a call
During a call, press the button. You’ll switch to hands-free. Press the button
again to switch back.
6. Music mode
This device supports A2DP function. You can listen to music stored in your
cell phone through the Bluetooth speaker.
6.1 When playing music: Press the button to Play/Pause
Press the “+” button to increase volume
Press the “-” button to decrease volume
6.2 When there is an incoming call, or when dialing, the device will
automatically switch from music mode to phone call mode.
6.3 To exit music mode, just turn off the phone’s music player.
6.4 Adjust volume accordingly when using the built-in speaker to play music.
7. Charging
The product has a built-in lithium-ion battery. When the battery is running
low, please charge in time, otherwise it will power off automatically during
use. When power is full, the indicator light changes from red to blue.
7.1 Remove the device from the steering wheel bracket.
7.2 Plug the 5PIN Mini USB to USB charging port and insert the car charger
into car cigarette lighter socket.
TROUBLESHOOTING
1. If you are unable to connect your Steering Wheel Bluetooth Speakerphone to
the cell phone, please check the following:
• Ensure the Steering Wheel Bluetooth Speakerphone is switched ON
• Ensure the Steering Wheel Bluetooth The speakerphone has enough battery
power
• Ensure the way your cell phone connects to the Steering Wheel Bluetooth
Speakerphone is correct
• Ensure the device is within a maximum of 30 feet of the mobile phone and
there is no interference with other electronic equipment
2. Sound distortion Adjust the volume accordingly to improve sound effects.
SPECIFICATIONS
1. Bluetooth version: 2.1
2. Bluetooth working Frequency: 2.4GHZ
3. Receiving range of the Bluetooth device: 0~10 meters
4. Talking range of the hands-free mic: 0~1 meters
5. Charging voltage: 5V
6. Capacity of the built-in lithium-ion battery: 300mAH
7. External size [L x W x H] 98 x 45 x 22.5MM
8. Weight: 42g
9. Operating temperature: -10°F – 70°F
10. Storage temperature: -20°F – 80°F
ACCESSORIES
• USB cable
• Car charger
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a1-year limited replacement warranty. If you have any questions not covered in this guide, please call our Customer Service department at 1 877-210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.