FALCON RIDGE JD-XUV-TC01 John Deere Gator XUV and HPX Top Cap Instruction Manual
- June 3, 2024
- FALCON RIDGE
Table of Contents
JD-XUV-TC01 John Deere Gator XUV and HPX Top Cap
Instruction Manual
JD-XUV-TC01 John Deere Gator XUV and HPX Top Cap
Notice: Do not smoke inside the cab or expose the enclosure to direct
flames. The cab is Flammable.
Be sure to read these instructions thoroughly before opening and installing
the top cap. The installation is best done when the temperature is 70 degrees
F. or warmer. The temperature affects the adhesive Velcro, if conditions
prevent installing in warmer weather it helps to store the adhesive Velcro at
room temperature prior to installation.
- Carefully open the carton and remove the rolled up Top Cap on a large flat surface that is clean and free of dirt.
- Check over the parts included in the carton with the parts list shown below:
2” Adhesive Velcro Hook strips:| 5 each (1 extra| 6” long
---|---|---
Top Cap| 1 each|
If any parts are damaged or missing please contact customer service at606-845-7439.
- Place the Top Cap over the roll cage of the Gator. Pull the corners down to determine the correct positions to place the 6” adhesive Velcro strips around the roll bars. The photos below show the correct way to attach the double-sided Velcro. Thank you for your purchase!
Return Policy
If for any reason you choose to return this product it must be returned within
30 days from the date the item is received. You MUST package the product
exactly as it was originally packaged from the factory to get a full refund
for the product! The vinyl windows should never be folded when packaging in
the box or for storage purposes. Lay all the windows on top of each other with
the canvas folded in between and the paper (if available) on both sides of the
windows.
All returned products will be inspected upon arrival at the production
facility and must be in unused, factory-new condition to receive a refund – a
25% restocking fee will apply. If ordered from Falcon Ridge please call
606-845-7439 to gain a return
authorization number, use our preferred shipping carrier (UPS) to return the
item (unless the item is defective, you are responsible for paying the
shipping to return the item.) Any returns submitted to Falcon Ridge without a
return authorization number will be charged a 20% restocking fee. If ordered
from one of Falcon Ridge’s many distributors, you must first call them and see
what their return policy is. Once your item reaches our production facility,
our customer satisfaction team will inspect your item to ensure unused,
factory-new condition.
NOTE: All windshields must be returned with the original protective film
intact and not removed. Do NOT REMOVE it if you have any intentions of
returning the item. Refund/ replacement of a windshield will only be processed
on items with original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect
them during transit and ensure your returned item arrives back factory fresh,
and in new resalable condition (any returned items that have been used,
altered, or damaged in any way will not be subject to a refund.) All contents
including instruction manuals, accessories, hardware, Velcro, etc. must be
included in your return shipment. Only items in OEM factory new condition will
be approved. Once returned items are received, a credit will be issued to the
original credit card/payment method used for the purchase. Outbound shipping
and return shipping costs will not be refunded. Please allow 4 to 6 weeks for
your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of our Falcon Ridge Cab Enclosures, Tops &/or
Windshields! Below are the terms under which your product is covered under our
manufacturer’s warranty. 30 Day Warranty which includes and is not limited to
replacing the enclosure, tops, and/or windshield due to defects of the
product. Please refer to the return policy in this case for more information.
1 Year Warranty includes any defect in material or workmanship within this
time frame we will gladly correct the problem or replace the enclosure, tops
&/or windshield. Upon submitting for the correction or replacement we will
need to receive pictures of the defect in material or workmanship along with
the receipt from the date of purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>