FALCON RIDGE TIMBERLINE Rearview Mirror Installation Guide
- October 30, 2023
- FALCON RIDGE
Table of Contents
FALCON RIDGE TIMBERLINE Rearview Mirror
Product Information: Timberline Mirror – 56-19053
The Timberline Mirror – 56-19053 is a rearview mirror assembly designed for use with RZR Pro-XP vehicles. The mirror assembly includes a mirror housing, a RZR Pro-XP backing plate, M8X20mm socket head bolts, and a RZR Pro-XP clamp assembly. The mirror housing is adjustable, allowing for customization of the angle of the mirror.
Product Usage Instructions
- Disassemble the RZR Pro-XP clamp assembly as per STEP 2 in the installation manual.
- Locate the mirror mounting plate on the ROPS (Roll Over Protection System) of the vehicle.
- Insert M8 nuts into the backing plate slots.
- Place the backing plate between the ROPS and the mounting plate as shown in STEP 3 of the installation manual.
- Use the M8X20mm socket head bolts to adjust tension on the ball joint. Turning the bolts clockwise will increase tension and counter-clockwise will decrease tension as per STEP 5 in the installation manual.
- Attach the mirror housing to the RZR Pro-XP clamp assembly using M8 nuts as per STEP 7 in the installation manual.
- Install M8 socket head bolts and torque them to 10ft-lbs.
- Adjust the angle of the mirror housing as necessary as per STEP 6 in the installation manual.
PARTS LIST
INSTALLATION INSTRUTION
-
STEP 1 Disassemble RZR Pro-XP clamp assembly
-
STEP 2 Attach the mirror housing to the RZR Pro-XP clamp
-
STEP 3 Locate mirror mounting plate on ROPS. Insert M8 nuts into the backing plate slots. Place the backing plate between the ROPS and the mounting plate as shown.
-
STEP 4 Install M8 socket head bolts and torque to 10ft-lbs.
-
STEP 5 Use these bolts to adjust tension on the ball joint. Clockwise turn will increase tension, Counter-clockwise will decrease tension
-
STEP6 Adjust angle of mirror housing as necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>