FALCON RIDGE KAW-610-TC01 Mule 600 & 610 Soft Top Instruction Manual
- June 3, 2024
- FALCON RIDGE
Table of Contents
2505 Bypass Rd. Flemingsburg, KY
41041606-845-7439
Instructions for Installation and Care of
Kawasaki 610 Mule
Top Cap
KAW-610-TC01
KAW-610-TC01 Mule 600 & 610 Soft Top
CAUTION: Do not smoke inside the cab or expose the product to direct
flames. The product is FLAMMABLE.
Be sure to read these instructions thoroughly before opening and installing
the enclosure. The installation is best done when the temperature is 70°F or
warmer. The temperature affects the adhesive Velcro. If conditions prevent
installing in warmer weather it helps to store the adhesive Velcro at room
temperature prior to installation.
- Carefully open the carton and remove the rolled Top Cap on a large flat surface that is clean and free of dirt.
- Check over the parts included in the carton with the parts list shown below:
Velcro hook strips| 5 each (1 extra)| 6” long
---|---|---
Top Cap| 1 each| - Place the Top Cap over the roll cage of the vehicle. Pull the corners down to determine the correct positions to place the 6″ adhesive Velcro strips around the roll bars. The photos below show the correct way to attach the double-sided Velcro straps. Ensure that all corners are positioned correctly at all four corners, then pull tight.
Cleaning and Storage Recommendations:
- Before removing the cab for storage, make sure it is clean and dry, to prevent soiling the textile. Clean with a soft rag or sponge using a mild liquid detergent soap and warm water solution. Let the top cap dry thoroughly before attempting to roll it for storage.
- It is important that the top cap be rolled up for storage rather than folding. Folding will cause undesirable creasing of the textile. Carefully roll up the top cap similar to the way it was when it was packed at the factory. Put the rolled top cap back into the carton for storage at normal room temperature. It is best not to expose the top cap to either extremely hot or cold temperatures when storing.
- A special cleaner/conditioner is available from Falcon Ridge that will greatly increase the service life of the product. If needed, additional hook and loop sets are available, as well as other spare parts and hardware. Contact Falcon Ridge for information.
- Transporting or trailering your UTV with the top cap installed is not generally recommended. It is best to remove the top cap before transporting your UTV.
Thank you for your purchase!
Return Policy
If for any reason you choose to return this product it must be returned within
30 days from the date the item is received. You MUST package the product
exactly as it was originally packaged from the factory to get a full refund
for the product!
The vinyl windows should never be folded when packaging in the box or for
storage purposes. Lay all the windows on top of each other with the canvas
folded in between and the paper (if available) on both sides of the windows.
All returned products will be inspected upon arrival at the production
facility and must be in unused, factory-new condition to receive a refund – a
25% restocking fee will apply.
If ordered from Falcon Ridge please call
606-845-7439 to gain a return
authorization number, use our preferred shipping carrier (UPS) to return the
item (unless the item is defective, you are responsible for paying the
shipping to return the item.) Any returns submitted to Falcon Ridge Offroad
without a return authorization number will be charged a 20% restocking fee. If
ordered from one of Falcon Ridge Offroad’s many distributors, you must first
call them and see what their return policy is. Once your item reaches our
production facility, our customer satisfaction team will inspect your item to
ensure unused, factory-new condition.
NOTE: All windshields must be returned with the original protective film
intact and not removed. Do NOT REMOVE it if you have any intentions of
returning the item. Refund/ replacement of a windshield will only be processed
on items with original protective film or if the windshield is defective.
Items must be properly packaged in the original shipping carton to protect
them during transit and ensure your returned item arrives back factory fresh,
and in new resalable condition (any returned items that have been used,
altered, or damaged in any way will not be subject for a refund.) All contents
including instruction manuals, accessories, hardware, Velcro, etc. must be
included in your return shipment. Only items in OEM factory new condition will
be approved. Once returned items are received, a credit will be issued to the
original credit card/ payment method used for the purchase. Outbound shipping
and return shipping costs will not be refunded. Please allow 4 to 6 weeks for
your refund to be processed.
Warranty
To The Owner of this Product:
Thank you for purchasing one of Falcon Ridge Offroad Cab Enclosures, Tops &/or
Windshields! Below are the terms under which your product is covered under our
manufacturer’s warranty.
30 Day Warranty which includes and is not limited to replacing the enclosure,
tops, and/or windshield due to defects in the product. Please refer to the
return policy in this case for more information.
1 Year Warranty includes any defect in material or workmanship within this
time frame we will gladly correct the problem or replace the enclosure, tops
&/or windshield. Upon submitting for the correction or replacement we will
need to receive pictures of the defect in material or workmanship along with
the receipt from the date of purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>