Nedis BTTR050BK Bluetooth Transmitter User Manual
- June 5, 2024
- nedis
Table of Contents
BTTR050BK Bluetooth Transmitter
User Manual
Preface
Thank you for purchasing the Nedis BTTR050BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The BTTR050BK is a product that allows you to wirelessly transmit Bluetooth audio.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Bluetooth® Transmitter
---|---
Article number
|
BTTR050BK
Dimensions (l x w x h)
|
59.2 x 30 x 13.5 mm
Bluetooth® version
|
5.0
Bluetooth® frequency range
|
2402 – 2480 MHz
Maximum transmit power
|
4 dBm
Bluetooth® signal range
|
Up to 10 m
Supported Bluetooth® profile
|
A2DP
Supported Bluetooth® codec
|
SBC
Number of connectable devices
|
1
Connections
|
Aux input, USB
Power input
|
5.0 VDC ; 500 mA
Cable length
|
1.0 m
Main parts (image A )
A
1. Pairing button
2. Status indicator LED
3. USB connector
4. 3.5 mm to 3.5 mm audio cable
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
- Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
- Do not place the product near heat sources, this can damage the product.
- Disconnect the product before cleaning.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Plugging in the product (image B )
B
- See image B for a connection overview.
- The status indicator LED A 2 blinks to indicate the product is in pairing mode.
- Only use a 5 V USB adapter to power the product. Powering the product through a USB port may produce background noises.
Use
Using the product
1. Enable Bluetooth on the device you want to pair.
2. Keep your Bluetooth audio device within range and switched on.
- Pairing time will vary depending on the device used.
- A 2 lights up to indicate pairing is successful.
Maintenance
- Disconnect the product before cleaning.
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Do not clean the inside of the product.
- Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product BTTR050BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>