SKYDANCE PH-150-12-4 RF 4-Channel Constant Voltage LED Driver User Manual

: June 5, 2024
: SKYDANCE

Table of Contents

PH-150-12-4 RF 4-Channel Constant Voltage LED Driver
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PH-150-12-4 RF 4-Channel Constant Voltage LED Driver

RF 4 Channel Constant Voltage LED Driver
Model No.: PH-150-12-4, PH-150-24-4

Features

Dimmable LED driver with RF control, apply to single color, dual color or RGB/RGBW LED constant voltage strips
Match with Skydance’s 2.4G single color, dual color and RGB/RGBW remote.
One RF LED driver accepts up to 10 remote controls
Universal AC input / Full range
4 channel constant voltage output, Max. total output power 150W
Built-in active PFC function: 0.95 Typ
When using with RGB/RGBW light, built in 10 dynamic mode, include jump or gradual change style
Auto-transmitting function: LED driver automatically transmit signal to another LED driver with 30m control distance
Synchronize on multiple number of LED drivers
Light on/off fade time 3s selectable
Over-heat / Over-load / Short circuit protection, recover automatically
Suitable for indoor LED lighting application
5 Year, 50,000hr warranty

Mechanical Structures and Installations

mechanical structure

User Manual Ver 1.0.7

Technical Parameters

Model

|

PH-150-12-4

|

PH-150-24-4

---|---|---

Output

|

Output Voltage

|

12VDC

|

24VDC

Output Current

|

4CH x 3.12A

|

4CH x 1.56A

Output Power

|

Max. 150W

Startup time

|

2S/115VAC, 1S/230VAC

Dimming Range

|

0～100％

Ripple & Noise

|

<=150mV/230VAC

PWM Frequency

|

1000Hz

Input

|

Input Voltage Range

|

100～240VAC

Frequency Range

|

50/60Hz

Efciency

|

92％/230VAC

Alternating Current

|

1.5A/115VAC,0.75A/230VAC

Power Factor

|

0.95/230VAC

THD

|

＜5％/100VAC, ＜10％/230VAC@ half lood

Inrush Current

|

Cold start 71A at 230VAC

Anti Surge

|

L-N:1KV:L,N-FG:2kv

Leakage Current

|

＜5mA

No Load Power

|

2W/115VAC, 2W/230VAC

Protection

|

Over Load Power

|

Shut down the output when current load >= 110％～140％, auto recovers.

Short Circuit

|

Shut down automatically if short circuit occurs, auto recovers.

Over Temperature

|

Intelligently adjust or turn off the output current if the PCB temp > 100℃, auto recovers.

Environment

|

Woking Temperature

|

-20℃～50℃

T-case Max

|

80℃

Working Humidity

|

20％～90％RH, non-condensing

Storage Temperature/Humidity

|

-40℃～80℃, 10％～95％RH

Temperature Coefcient

|

±0.03％/℃ (0-50％)

Vibration Resistance

|

10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min

Safety&EMC

|

IP Rating

|

IP20

Security Specications

|

IEC/EN61347-1, IEC/EN61347-2-13

Withstand Voltage

|

I/P-O/P: 3750VAC

Insulation Resistance

|

I/P-O/P: 100MΩ/500VDC/25℃/70％RH

EMC Emission

|

EN55015, EN61000-3-2 Class C, IEC61000-3-3

EMC Immunity

|

EN61000-4-2.3.4.5.6.8.11, EN61547

Certications

|

CE, EMC

Applications

Suitable for LED related xture or appliance which use LED light bar and LED tape (like LED Decoration or Advertisement devices).
Office / Commercial / Domestic Lighting, Hotels, Retail and Display.
Use for retro t upgrades & new luminaire designs.

Wiring Diagram

For RGB/RGBW

RGB

For dual color

dual color

For Single color

deming remote

AC Push-Dim connection

dim connection

Note: Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

User Manual Ver 1.0.7

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use Match keyMatch: Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
Delete: Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Use Power Restart
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.

Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.

Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.

Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.

When use multiple RF drivers, two application method:

All the drivers in the same zone. Auto-transmitting: One driver can transmit the signals from the remote to another driver within 30m, as long as there is a driver within 30m, the remote control distance can be extended. Auto-synchronization: Multiple drivers within 30m distance can work synchronously when they are controlled by the same remote. Driver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that driver placements should be no further apart than15m.
Each driver(one or more) in a different zone, like zone 1, 2, 3 or 4.

Push-Dim function

Short press:
Turn on or off light.
Long press (1-6s):
Press and hold to step-less dimming,
With every other long press, the light level goes to the opposite direction.
Synchronization:
If more than one LED driver are connected to the same push switch, do a long press for more than 10s, then the system is synchronized and all lights in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations. We recommend the number of LED drivers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to LED driver should be no more than 20 meters.