SKYDANCE KS AC Triac Rotary Panel Dimmer Instruction Manual

SKYDANCE KS AC Triac Rotary Panel Dimmer Instruction Manual

Model No.: KS

Rotary dimming/Leading edge or trailing edge/Min brightness settable/Wireless remote control

Features

• Rotary panel AC phase-cut dimmer, 1 channel output.
• To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.
• Rotate knob to change brightness, support push and long push operation.
• Leading edge dimming or trailing edge dimming set by dip switch.
• Min brightness can be set by key.
• Light on/off fade time 3s selectable.
• Compatibility with RF 2.4G dimming remote control.
• Over-heat / Over-load protection, recover automatically

Technical Parameters

Compatible Load Types

Mechanical Structures and Installations

Wiring diagram

**Caution:** Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged.

● KS connect with dimmable LED driver

Note: When calculating the maximum number of load lamps or drivers, the input power or input current parameters of a single lamp or driver must be used, the output power parameters can not be used.

In addition, the maximum surge current of the dimmer is 65A, the sum of surge current of multiple dimmable LED drivers should not exceed 2 times. otherwise, the product will be overloaded and damaged.

Knob function

• Push: Turn on or off light.
  After turn on light:

• Rotate: Rotate knob to adjust brightness, 2.5 turns, 50 levels.

• Long push(1-5s): Continuous 256 levels brightness adjustment.

Leading edge or trailing edge dimming setting

Select leading edge(forward-phase) dimmer or trailing edge(reverse-phase) dimmer according to dimmable LED light or driver.

Caution: before power on, you must confirm the selection of dip switch.

Min brightness setting

Long press Min set key for 2s, the light blink 2 times, ready for min brightness set,
then short press Min set key 1-6 times, to get 6 min brightness: 5%, 10%, 15%, 20%, 25% or 30%, the light will output the current min brightness immediately,

Long press Min set key for 2s or wait 8s, quit min brightness set, the light will output 100% brightness automatically.

Light on/off fade time

Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times.

Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.

Match Remote Control (three match ways)

The AC triac rotary panel dimmer can also match with the RF dimming remote (optional).

End user can choose the suitable match/delete ways. Three options are offered for selection:

Use Match key
Match:
Short press match key, immediately press on/off key(single zone remote) or zone key(multiple zone remote) of the remote.

Delete:
Press and hold match key for 5s to delete all match.

Use Knob

Match:
Turn on light, turn off, immediately push the knob for 5s, immediately press on/off key(single zone remote) or zone key(multiple zone remote) of the remote.

Delete:
Turn on light, turn off, immediately push the knob for 10s, delete all matched remotes.

Use Power Restart
Match:
Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again, immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Malfunctions analysis & troubleshooting

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>