Nedis SPBB350BK Bluetooth Party Speaker User Manual

: June 5, 2024
: nedis

SPBB350BK Bluetooth Party Speaker

Nedis SPBB350BK Bluetooth Party Speaker

User Manual

Preface

Thank you for purchasing the Nedis SPBB350BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis SPBB350BK is intended to stream audio from your media device via Bluetooth, audio cable or from a USB flash drive.

This product is intended for indoor and outdoor use.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Bluetooth® Party Speaker

---|---

Article number

|

SPBB350BK

Dimensions

|

215 x 215 x 390 mm

Weight

|

4700 g

Features

|

True Wireless Stereo (TWS) and party lights

RMS audio output

|

4 x 4 W + 2 x 27 W

Peak audio output

|

150 W

Bluetooth® frequency range

|

2402 – 2480 MHz

Bluetooth® version

|

v4.2 + BR

Transmission distance

|

Up to 10 meters

Maximum transmission power

|

4 dBm

Maximum antenna gain

|

0 dBi

Battery type

|

Lithium-ion

Battery capacity

|

4400 mAh

Charging input power

|

5.0 VDC / 2.0 A

Charging time

|

Up to 5 hours

Maximum battery play time (at 50% volume)

|

Up to 3.5 hours

Impedance

|

4 Ω

Frequency response

|

80 Hz – 15 KHz

Water resistance

|

IPX5

Main parts (image A)

A

1. Previous song / Volume down button

2. Next song / Volume up button

3. Play / pause button

4. Power button

5. TWS button

6. Mode button

7. Light button

8. Battery indicator lights

9. Dust cover

10. USB port

11. AUX port

12. USB-C port

13. Microphone port (6.35 mm)

14. AUX cable

15. USB-C cable

Safety instructions

|

To prevent possible hearing damage, do not listen at high volume levels for long periods.

---|---

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Do not expose the product to water or moisture.
Disconnect the product from the electrical outlet and other equipment if problems occur.
Do not immerse the product in water for cleaning.
Only use the provided USB charging cable.
The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
Do not charge when the product is wet.
Do not leave a battery on prolonged charge when not in use.
Do not dismantle, open or shred batteries.
Do not expose the product to direct sunlight, naked flames or heat.

Explanation of the safety symbols on the product

Icon

|

Description

---|---

|

Indication to explain that the product can cause hearing damage. Do not listen at high volume levels for long periods.

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Indication that the producer of the packaging material complies with the Packaging Law and has contributed to the costs of the ‘Green Dot’ waste separation and recycling system.

|

Indication to explain that the product can be recycled.

|

Indication to explain that the product should be recycled appropriately.

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Switching on the product

Press the power button A 4 to switch the product on or off.
When inactive, the product automatically switches off after 10 minutes.

Use

Charging the product

Only use the provided USB charging cable.

1. Remove the rubber cover A 9.

2. Plug the USB-C cable A15 into the USB-C port A12.

3. Plug the other end of A15 into a 5.0V/2.0A USB adapter (not provided).

4. Plug the USB adapter into a power outlet.

The battery indicator lights A 8 burn to indicate the product is charging.
A 8 gives an indication of how far the battery is charged.
When all four lights burn, the product is fully charged.
Close A 9 to protect the connectors from dust and water.

Pair with Bluetooth

1. Press Mode button A 6 to select Bluetooth.

A 4 blinks blue to indicate pairing mode is active.

2. Enable Bluetooth on the device you want to pair.

3. Select “SPBB350BK” from the list of available Bluetooth devices on your device.

If asked, enter the pairing code ‘0000’.
If the product has already been paired with another device, make sure that device is switched off or Bluetooth is disabled.
When the product has lost connection to the Bluetooth source, it will automatically reconnect when back in range and switched on.

Controlling the music

1. Press play/pause button A 3 to play or pause music.

2. Press previous song / volume down button A 1 or next song / volume up button A 2 to skip between tracks.

3. Press and hold A 2 to turn the volume up.

4. Press and hold A 1 to turn the volume down.

Connecting with audio cable

1. Plug the AUX cable A14 into the AUX port A11.

2. Plug the other end of A14 into your audio source.

Playing music without Bluetooth disconnects Bluetooth. Press A 6 until the product is in Bluetooth mode to connect to your Bluetooth audio source again.
The music can be controlled from the connected device.

Playing music from a USB flash drive

Insert a USB flash drive in the USB port A10
The product emits a tone, music from your USB flash drive plays automatically.
The Bluetooth connection is interrupted when a USB flash drive is inserted. Press A 6 to switch back to Bluetooth mode.

Pairing two speakers with TWS

TWS makes it possible to connect two speakers wirelessly and in sync with each other.
TWS only works with two speakers of the same type.

1. Switch on both speakers and set them to Bluetooth mode with A 6.

2. Press the TWS button A 5 on one of the speakers.

The product emits a tone to indicate entering pairing mode.

3. Activate Bluetooth on your audio source and connect with the product.

The product emits three tones to indicate pairing is successful.
Press and hold A 5 to disconnect from the paired device.

Connecting a microphone

Plug a microphone (not included) into the Microphone port (6.35 mm) A13.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product SPBB350BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/SPBB350BK#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands