Leshan LSFD002 Locate It Device User Manual
- June 15, 2024
- Leshan
Table of Contents
Leshan LSFD002 Locate It Device
Getting Started
Power On / Off:
- Place the CR2032 battery (positive side up, i.e. text facing up) into the battery case in the back of Locate It Device, it is automatically turned on. Or press the Locate It Device’s Function Button once to turn it on if the battery is already in the battery case. It should beep once to indicate that it is powered on.
- To power off, press and hold the same button until two confirmation beeps sound, then release the button, two short beeps will sound to indicate that it is powered off.
Check For Updates:
- To use the Find My app to locate this item, the latest version of iOS, iPadOS or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.
Add Your Locate It Device
Start The APP
- Open Find My app on your supported iPhone or iPad.
Connect Your Locate It Device
- Press the function button once to power on your Locate It Device.
- Tap+, then “Add Other Item”.
- Once your Locate It Device is located, tap “Connect”.
- Enter a name and choose an emoji for your Locate It Device and tap “Continue”.
- Find My will ask for confirmation to add your Locate It Device to your Apple ID, tap “Agree”.
- Tap “Finish” and your Locate It Device will be set up and ready to be used.
Locate Your Locate It Device
Find Locate It Device When It’s Nearby:
- Open Find My app and select the “Item” tab or open the Find Items app on your Apple Watch.
- Tap on your Locate It Device from the list.
- Tap “Play Sound” to make your Locate It Device beep.
- Tap “Stop Sound” to stop the beeps once you find.
Find Locate It Device’s Location:
- Open Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
- Tap on your Locate It Device from the list.
- Your Locate It Device’s location will appear on the Map with a time stamp of when the Items was located.
- To navigate to the Locate It Device’s location, tap “Directions” to open Apple Maps.
Notifications
Enabling “Notify When Left Behind”:
- Open Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
- Tap on your Locate It Device from the list.
- Under “Notifications” enable the “Notify When Left Behind” toggle.
- You will receive a notification when you leave your Locate It Device behind and it’s no longer in range of your device.
Enabling “Notify When Found”:
- When your Locate It Device has been put into ‘Lost Mode’, under “Notifications”, you can enable the “Notify When Found” toggle.
- When your Locate It Device is seen by another Find My network device, you will receive a notification of its location.
- Note: “Notify When Found” can also be activated when your Locate It Device is out of range.
When Your Locate It Device Is Lost
Enabling “Lost Mode”:
- Open Find My app and select the “Items” tab or open the Find Items app on your Apple Watch.
- Tap on your Locate It Device from the list.
- Under “Lost Mode” tap “Enable”.
- A screen detailing Lost Mode will pop up, tap “Continue”.
- Enter Your phone number or email address and tap “Next”.
- You may enter a message that will be shared with the person that finds your Item.
- Tap “Activate” to enable “Lost Mode”.
- Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
- Note: When “Lost Mode” is enabled, your Locate It Device is locked and cannot be paired to a new device.
Lookup Serial Number
Search The Locate It Device:
- Open Find My app.
- Select Items, swipe up, and select “Identify Found Item”.
- Select the Locate It Device and select Continue.
Follow Instructions For Lookup Serial Number:
- Locate the button in the back of the Locate It Device.
- Press and hold the button for six seconds. Three beeps will sound while the button is depressed.
- Release the button. Two confirmation beeps will sound.
- In the Find My app, Select “Continue On Website”, you will see the Serial Number information.
Resetting Locate It Device
Remove The Locate It Device From Find My app:
- Open Find My app and select the “Items” tab.
- Tap on your Locate It Device from the list.
- Please ensure “Lost Mode” is disabled.
- Scroll to the bottom of the screen and tap “Remove Item”.
- A summary will open, tap “Remove” to confirm.
- Factory Reset Your Locate It Device:
- Locate the button in the back of the Locate It Device.
- After successfully removing the Locate It Device from Find My app, press and hold the Locate It Device’s Function Button until four or more confirmation beeps sound, then release the button, three short beeps will sound to indicate that it is factory reset.
- The Locate It Device is now ready to be paired to a new Apple ID.
Extras
Replace The Battery:
- Open the battery cover in the back of your Locate It Device.
- Replace the battery with a new CR2032 battery placing it positive side up (text facing up).
- Carefully close the battery cover in the back of your Locate It Device.
Unwanted Tracking
- If any Find My network accessory separated from its owner is seen moving with you over time, you’ll be notified in one of the two ways:
- lf you have an iPhone or iPad, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOS 14.5 or later.
- lf you don’t have an iOS device, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved. These features were created specifically to discourage people from trying to track you without your knowledge
The Fine Print
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or Tv interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
About Apple Find My
The Apple Find My network provides an easy, secure way to locate compatible
personal items on a map using the Find My app on your iPhone, iPad, or Mac.
Simply pair your compatible product with the Apple Find My app to view it
right alongside your Apple devices. If your item ever goes missing, you can
put it in Lost Mode to display a message and contact information to anyone who
might find it. The Find My network is encrypted and anonymous, so no one else,
not even Apple or the maker of your personal item, can view its location. Use
of the Works with Apple badge means that a product has been designed to work
specically with the technology identified in the badge and has been certified
by the product manufacturer to meet Apple Find My network product
specifications and requirements. Apple is not responsible for the operation of
this device or use of this product or its compliance with safety and
regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone,
iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a
trademark or registered trademark of Cisco in the U.S. and other countries and
is used under license.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>