VYNCO 2CS1W Home Card Switch Instruction Manual
- June 5, 2024
- VYNCO
Table of Contents
VYNCO 2CS1W Home Card Switch
SPECIFICATIONS
SPECIFICATIONS
Input Voltage| 250V AC, 50Hz
Rated Current| 16A Resistive
Minimum Load| 0A
Contacts| 1xN/0
WARRANTY
This product is covered by the standard 5 Year Vynco Warranty – proof of
purchase is required. Please contact Vynco for details of returns procedure.
NOTE: This product contains NO user serviceable parts.
WIRING
SAFETY
This product must be installed with the card slot facing upwards. Do not install horizontally or facing downwards. This keycard switch is required to be protected by a 16A MCB or RCBO.
- This product complies in full with AS/NZS 606691.
- This product should be installed by a suitably qualified person in accordance with Australian and New Zealand wiring rules.
SWITCHING
Electronic switch activated with standard sized card, specific card not required.
- Switch On: Instant switching on insertion of card.
- Switch Off: 1 minute after card is removed (time interval not adjustable).
INSTALLATION PROCEDURE
- Card switch is designed for installation into a flush box or similar location secured with two fixing screws.
- Ensure the relevant circuits are isolated and safe prior to installation.
- Cut out flush box opening.
- Terminate wiring to card switch.
- Secure card switch into flush box with two securing screws (supplied). Then clip on fascia cover.
VYNCO INDUSTRIES (NZ) LIMITED CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011 PO Box 9022, Tower Junction,
Christchurch 8149 New Zealand
P +64 3 379 9283 F +64 3 379 6838
E sales@vynco.co.nz
VYNCO.CO.NZ
AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061 New Zealand
P +64 9 525 6051 F +64 9 525 5799
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>