Hatco Corporation ITQ-875-1C Intelligent Toast Qwik Conveyor Toaster ITQ Series Instruction Manual
- June 12, 2024
- Hatco Corporation
Table of Contents
Hatco Corporation ITQ-875-1C Intelligent Toast Qwik Conveyor Toaster ITQ
Series
Product Information
The product is a Conveyor Toaster from the ITQ Series, manufactured by Hatco Corporation. It comes in three different models: ITQ-875-1C, ITQ-1000-1C, and ITQ-1750-2C. The user manual provides information on replacement parts for the ITQ-875-1C and ITQ-1000-1C models. It is important to locate the Specification Label on the unit to determine the exact Model Name and electrical specifications. This information is required to identify the correct replacement parts. The user manual provides an exploded view illustration to help locate the Specification Label. Using replacement parts other than those supplied by Hatco Corporation can result in damage to the unit or injury to personnel. It will also void all warranties.
Product Usage Instructions
1. Locate the Specification Label on the back of the unit to determine the
exact Model Name and electrical specifications.
2. Use the exploded view illustration(s) provided in the user manual to find
the location of the Specification Label.
3. When replacing parts, ensure that only the replacement parts supplied by
Hatco Corporation are used. Using other replacement parts may result in damage
to the unit or injury to personnel, and it will void all warranties.
4. For Model ITQ-875-1C, refer to the “Model ITQ-875-1C Replacement Parts
List” to identify the required replacement parts and their corresponding part
numbers and quantities.
5. For Model ITQ-1000-1C, refer to the “Model ITQ-1000-1C Replacement Parts
List” to identify the required replacement parts and their corresponding part
numbers and quantities.
6. For both models, if any component of the Electronic Touchpad Control Kit
fails, all three components (electronic control, current sensor, and 24 V
transformer) must be replaced together.
7. Ensure that all electrical components are designed to operate on supply
voltages between 208 V and 240 V for Model ITQ-875-1C
Part list
Model ITQ-875-1C
Parts For Model ITQ-875-1C
| Item | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Top Cover | 04.56.282.00 | 1 |
| 2 | Drive Shaft Assembly | 04.56.293.00 | 1 |
| 3 | E-Ring | 05.11.035.00 | 2 |
| 4 | Bearing Assembly, Rear | 04.05.286.00 | 2 |
| 5 | Driven Sprocket | 05.09.062.00 | 1 |
| 6 | Drive Chain | 05.03.075.00 | 1 |
| 7 | Stepper Motor, Conveyor | 02.12.121.00 | 1 |
| 8 | Side Cover, Left | 04.05.988.00 | 1 |
| 9 | Drive Sprocket | 05.09.061.00 | 1 |
| 10 | Terminal Block | R02.15.047.00 | 1 |
| 11 | Power Cord w/Plug | ||
| NEMA 6-20P (standard) | 02.18.111.00 | 1 | |
| NEMA L6-20P (optional) | 02.18.186.00 | 1 | |
| BS-1363 | 02.18.068.00 | 1 | |
| CEE 7/7 Schuko | 02.18.038.00 | 1 | |
| AS-3113 | 02.18.105.00 | 1 | |
| 12 | Cord Grip | R02.20.259.00 | 1 |
| 13 | Power Switch, Rocker | 02.19.161.00 | 1 |
| 14 | EMI FIlter | 02.13.359.00 | 1 |
| 15 | Heating Element, Upper, 1650 W | ||
| 208 V | 02.05.960.00 | 1 | |
| 240 V | 02.05.987.00 | 1 | |
| 230 V | 02.05.1053.00 | 1 | |
| 16 | Bracket, Top Element | 04.05.975.00 | 1 |
| 17 | Power Supply | 02.17.064.00 | 1 |
| 18 | Fan, Cooling | 02.12.163.00 | 2 |
| 19 | Solid State Relay Kit (includes thermal pad) | R02.01.355.00 | 2 |
| 20 | Heat Sink, Relay | 04.09.872.00 | 2 |
| 21 | Bracket, Bottom Element | 04.05.897.00 | 1 |
| 22 | Belt Support, Element Bracket | 04.05.874.00 | 1 |
| 23 | Heating Element, Lower, 1050 W | ||
| 208 V | 02.05.961.00 | 1 | |
| 240 V | 02.05.988.00 | 1 | |
| 230 V | 02.05.963.00 | 1 | |
| Item | Description | Part Number | Qty. |
| --- | --- | --- | --- |
| 24 | Filter, Wire Mesh | R02.12.138.00 | 2 |
| 25 | Toast Chute Slide | 04.56.284.00 | 1 |
| 26 | Toast Chute | 04.56.283.00 | 1 |
| 27 | Leg, 1” | R05.30.081.00 | 4 |
| 28 | High Limit Thermostat, Mechanical, 250°F | R02.16.118.00 | 1 |
| 29 | High Limit T-Stat, Manual | 02.16.195.00 | 1 |
| 30 | High Limit Thermostat, Mechanical, 275°F | 02.16.192.00 | 1 |
| 31 | Heat Sheild | 04.56.199.00 | 1 |
| 32 | Side Cover, Conveyor, Left | 04.56.122.00 | 1 |
| 33 | Side Cover, Conveyor, Right | 04.56.123.00 | 1 |
| 34 | Side Cover, Right | 04.56.560.00 | 1 |
| 35 | Bearing Assembly, Front | 04.05.387.00 | 2 |
| 36 | Shaft Assembly, Front | 04.56.302.00 | 1 |
| 37 | Conveyor Belt | 05.03.073.00 | 1 |
| 38 | Waterproof Cap, USB | 02.18.513.00 | 1 |
| 39 | USB Cable | 02.18.478.00 | 1 |
| 40 | Indicator Light, Red | 02.19.151.00 | 1 |
| 41 | Electronic Touchpad Control Kit ***** | R02.01.385A.00 | 1 |
| 42 | Crumb Tray | R04.56.285.00 | 1 |
| 43 | Product Sensor Kit | R02.01.368.00 | 1 |
| Wiring Diagram | |||
| 120 V | 10-01-1259 | ||
| 230 V | 10-01-1379 |
Electronic Touchpad Control Kit contains electronic control, current sensor,
24 V transformer, and a USB flash drive. Failure of any one of these
compoments requires replacement of all three.
NOTE: All electrical components on Model ITQ-875-1C are designed to
operate on supply voltages between 208 V and 240 V. The shaded areas contain
electrical information for International models only.
NOTE: The last four digits in a ten digit numerical serial number are the
manufacturing date code.
Example: Serial number 9625061931 has a date code of “1931” which indicates
the following:
Model ITQ-1000-1C
Parts For Model ITQ-1000-1C
| Item | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Top Cover | 04.05.920.00 | 1 |
| 2 | Drive Shaft Assembly | 04.05.932.00 | 1 |
| 3 | E-Ring | 05.11.035.00 | 2 |
| 4 | Bearing Assembly, Rear | 04.05.286.00 | 2 |
| 5 | Driven Sprocket | 05.09.062.00 | 1 |
| 6 | Drive Chain | 05.03.070.00 | 1 |
| 7 | Stepper Motor, Conveyor | 02.12.121.00 | 1 |
| 8 | Side Cover, Left | 04.05.958.00 | 1 |
| 9 | Drive Sprocket | 05.09.061.00 | 1 |
| 10 | Terminal Block | R02.15.047.00 | 1 |
| 11 | Power Switch, Rocker | 02.19.161.00 | 1 |
| 12 | Power Cord w/Plug | ||
| NEMA 6-30P (standard) | 02.18.122.00 | 1 | |
| NEMA L6-30P (optional) | 02.18.150.00 | 1 | |
| CEE 7/7 Schuko | 02.18.038.00 | 1 | |
| No Plug | 02.18.103.00 | 1 | |
| 13 | Cord Grip | R02.20.259.00 | 1 |
| 14 | EMI FIlter | 02.13.359.00 | 1 |
| 15 | Bracket, Top Element | 04.05.940.00 | 1 |
| 16 | Power Supply | 02.17.064.00 | 1 |
| 17 | Fan, Cooling | 02.12.125.00 | 2 |
| 18 | Solid State Relay Kit (includes thermal pad) | R02.01.355.00 | 2 |
| 19 | Heat Sink, Relay | 04.09.872.00 | 2 |
| 20 | Bracket, Bottom Element | 04.05.897.00 | 1 |
| 21 | Belt Support, Element Bracket | 04.05.874.00 | 1 |
| 22 | Heating Element | ||
| 208–240 V, 2150 W | 02.05.886.00 | 2 | |
| 230 V, 1800 W | 02.05.953.00 | 2 | |
| Item | Description | Part Number | Qty. |
| --- | --- | --- | --- |
| 23 | Filter, Wire Mesh | R02.12.138.00 | 2 |
| 24 | Toast Chute | 04.05.921.00 | 1 |
| 25 | Leg, 1” | R05.30.081.00 | 4 |
| 26 | Fuse, 250 V, 15 A (includes 2) | R02.03.052.02 | 1 |
| 27 | Fuse Block | 02.03.022.00 | 1 |
| 28 | High Limit Thermostat | R02.16.118.00 | 1 |
| 29 | High Limit T-Stat, Manual | 02.16.195.00 | 1 |
| 30 | Side Cover, Conveyor, Left | 04.05.828.00 | 1 |
| 31 | Side Cover, Conveyor, Right | 04.05.829.00 | 1 |
| 32 | Side Cover, Right | 04.05.959.00 | 1 |
| 33 | Bearing Assembly, Front | 04.05.387.00 | 2 |
| 34 | Shaft Assembly, Front | 04.05.933.00 | 1 |
| 35 | Conveyor Belt | 05.03.069.00 | 1 |
| 36 | Waterproof Cap, USB | 02.18.513.00 | 1 |
| 37 | USB Cable | 02.18.478.00 | 1 |
| 38 | Indicator Light, Red | 02.19.151.00 | 1 |
| 39 | Electronic Touchpad Control Kit ***** | R02.01.385A.00 | 1 |
| 40 | Crumb Tray | R04.56.006.00 | 1 |
| 41 | Product Sensor Kit | R02.01.368.00 | 1 |
| 42 | Filter Retrofit Kit (not shown) † | R04.56.145.00 | 1 |
| Wiring Diagram | |||
| 120 V | 10-01-1069 | ||
| 230 V | 10-01-1246 |
Electronic Touchpad Control Kit contains electronic control, current sensor,
24 V transformer, and a USB flash drive. Failure of any one of these
compoments requires replacement of all three. Filter Retrofit Kit can be
ordered for units with date code 1343 and older to replace old-style foam
filters with current wire mesh filters.
NOTE: All electrical components on Model ITQ-1000-1C are designed to
operate on supply voltages between 208 V and 240 V. The shaded areas contain
electrical information for International models only.
NOTE: The last four digits in a ten digit numerical serial number are the
manufacturing date code.
Example: Serial number 9625061931 has a date code of “1931” which indicates
the following:
Model ITQ-1750-2C
Parts For Model ITQ-1750-2C
| Item | Description | Part Number | Qty. |
|---|---|---|---|
| 1 | Top Cover | 04.56.098.00 | 1 |
| 2 | Drive Shaft Assembly, Left | 04.56.116.00 | 1 |
| 3 | E-Ring | 05.11.035.00 | 4 |
| 4 | Bearing Assembly | 04.05.286.00 | 6 |
| 5 | Driven Sprocket | 05.09.062.00 | 2 |
| 6 | Drive Chain, 8.5” | 05.03.075.00 | 1 |
| 7 | Stepper Motor, Conveyor | 02.12.121.00 | 2 |
| 8 | Drive Sprocket | 05.09.061.00 | 2 |
| 9 | Drive Chain, 13” | 05.03.074.00 | 1 |
| 10 | Drive Shaft Assembly, Right | 04.56.117.00 | 1 |
| 11 | Side Cover, Left | 04.05.988.00 | 1 |
| 12 | Fuse, 250 V, 15 A (includes 2) | R02.03.052.02 | 2 |
| 13 | Fuse Block | 02.03.022.00 | 1 |
| 14 | High Limit T-Stat | R02.16.118.00 | 1 |
| 15 | High Limit T-Stat, Manual | 02.16.195.00 | 1 |
| 16 | Terminal Block | R02.15.047.00 | 1 |
| 17 | Power Cord w/Plug | ||
| NEMA 6-30P (standard) | 02.18.122.00 | 1 | |
| NEMA L6-30P (optional) | 02.18.150.00 | 1 | |
| No Plug | 02.18.103.00 | 1 | |
| IEC 309 | 02.18.852.00 | 1 | |
| 18 | Cord Grip | R02.20.259.00 | 1 |
| 19 | Power Switch, Rocker | 02.19.161.00 | 1 |
| 20 | EMI FIlter | 02.13.359.00 | 1 |
| 21 | Heating Element, Upper, 1500 W | ||
| 208 V | 02.05.996.00 | 2 | |
| 240 V | 02.05.997.00 | 2 | |
| 230 V | 02.05.955.00 | 2 | |
| 22 | Bracket, Top Element | 04.56.975.00 | 1 |
| 23 | Power Supply | 02.17.064.00 | 1 |
| 24 | Fan, Cooling | 02.12.125.00 | 2 |
| 25 | Filter, Wire Mesh | R02.12.138.00 | 2 |
| 26 | Bracket, Bottom Element | 04.05.897.00 | 1 |
| 27 | Belt Support, Element Bracket | 04.05.874.00 | 2 |
| 28 | Heating Element, Lower, 980 W | ||
| 208 V | 02.05.998.00 | 2 | |
| 240 V | 02.05.999.00 | 2 | |
| 230 V | 02.05.956.00 | 2 | |
| Item | Description | Part Number | Qty. |
| --- | --- | --- | --- |
| 29 | Solid State Relay Kit (includes thermal pad) | R02.01.355.00 | 4 |
| 30 | Heat Sink, Relay | 04.09.872.00 | 4 |
| 31 | Toast Chute Slide | 04.56.228.00 | 1 |
| 32 | Toast Chute | 04.56.229.00 | 1 |
| 33 | Leg, 1” | R05.30.081.00 | 4 |
| 34 | Heat Shield | 04.56.199.00 | 1 |
| 35 | Side Cover, Conveyor, Right | 04.56.123.00 | 1 |
| 36 | Center Cover, Conveyor | 04.56.106.00 | 1 |
| 37 | Side Cover, Conveyor, Left | 04.56.122.00 | 1 |
| 38 | Side Cover, Right | 04.56.127.00 | 1 |
| 39 | Bracket, Top Element, w/Standoff | 04.56.553.00 | 1 |
| 40 | Bracket, Bottom Element, w/ Standoff | 04.56.552.00 | 1 |
| 41 | Reflector Assembly ▲ ‡ | R04.56.721.00 | 2 |
| 42 | Bearing Assembly w/Nut, Front | 04.05.387.00 | 2 |
| 43 | Shaft Assembly, Front | 04.56.115.00 | 2 |
| 44 | Conveyor Belt, Right, 45-1-1/2” | 05.03.072.00 | 1 |
| 45 | Conveyor Belt, Left, 48” | 05.03.073.00 | 1 |
| 46 | Waterproof Cap, USB | 02.18.513.00 | 1 |
| 47 | USB Cable | 02.18.478.00 | 1 |
| 48 | Indicator Light, Red | 02.19.151.00 | 1 |
| 49 | Electronic Touchpad Control Kit ***** | R02.01.385B.00 | 1 |
| 50 | Crumb Tray, Right | R04.56.100.00 | 1 |
| 51 | Crumb Tray, Left | R04.56.099.00 | 1 |
| 52 | Product Sensor/Reflector Kit— |
Date Code 1716 and newer
| R00.02.0112.00| 1
53| Product Sensor/Reflector Kit—
Date Code 1715 and older
| R02.01.368.00| 1
54| Food Paddle, Standard| R04.56.182.00| 1
55| Handle, Food Paddle| 05.30.182.00| 1
56| Food Paddle, Perforated| R04.56.183.00| 1
57| Filter Retrofit Kit (not shown) †| R04.56.145.00| 1
| Wiring Diagram| |
| 120 V| 10-01-1102|
| 230 V| 10-01-1245|
For units with date code 1715 and older, use Reflector Assembly P/N
R04.56.218.00. Included with Product Sensor/Reflector Kit. Electronic Touchpad
Control Kit contains electronic control, current sensor, 24 V transformer, and
a USB flash drive. Failure of any one of these compoments requires replacement
of all three. Filter Retrofit Kit can be ordered for units with date code 1343
and older to replace old-style foam filters with current wire mesh filters.
The shaded areas contain electrical information for International models only.
NOTE: The last four digits in a ten digit numerical serial number are the
manufacturing date code.
Example: Serial number 9625061931 has a date code of “1931” which indicates
the following:
IMPORTANT NOTE:
Locate the Specification Label on unit to determine exact Model Name and
electrical specifications. This information is needed to identify the correct
replacement parts. See exploded view illustration(s) for Specification Label
location.
CAUTION
Use of replacement parts other than those supplied by Hatco Corporation may
result in damage to unit or injury to personnel and will void all warranties.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>