VYNCO VAF16 Axial Fan Instruction Manual
- June 5, 2024
- VYNCO
Table of Contents
VAF16 Axial Fan
Instruction Manual
SPECIFICATIONS
Input Voltage | 230 – 240VAC, 50Hz |
---|---|
Power | 20W |
No. of Blades | 9 |
Duct Size | 150mm |
IP Rating | IP44 |
Operating Temperature | -10 to 70°C |
Air Pressure | 125Pa |
WARRANTY
This product is covered by the standard 5 Year Vynco Warranty – proof of
purchase is required. Please contact Vynco for details of the returns
procedure.
NOTE: This product contains NO user-serviceable parts.
SAFETY
Make sure the power is switched off before installing the fan.
Don’t use the fan if the power cord or plug is damaged.
Return to the wholesaler for faulty product process through electrician.
Don’t use the fan if it’s damaged, malfunctions or is dropped. The fan is
designed for indoor use only.
Don’t put any insulation around or over the fan.
For inline duct use, airflow is ducted outside.
This fixed appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge unless they have been given supervision or instructions
concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
This product should be installed by a suitably qualified person in accordance
with Australian and New Zealand wiring rules.
INSTALLATION PROCEDURE
STEP 1
The preferred method is to mount the fan base onto a solid surface, in the
roof space at least 2.3m above the floor, by screwing it to the timber
trusses. Use at least No. 6 x 1/2 inch screws.
STEP 2
Keep the fan at least 50mm away from surrounding structures.
STEP 3
Attach 150mm ducting onto each end of the fan using duct tape.
STEP 4
Make sure the ducting is not impeding the fan blade.
The duct should be pulled tight and cut to length, and connected to the
internal grille and external grille, otherwise, the performance of the fan
will be affected.
STEP 5
Attach the fan to the mounting fan base. Ensure all 4 snap hooks are secured
correctly. Plug the fan into a powerpoint.
VYNCO INDUSTRIES (NZ) LIMITED
CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P +64 3 379 9283 F +64 3 379 6838
E sales@vynco.co.nz
VYNCO.CO.NZ
AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P +64 9 525 6051 F +64 9 525 5799
VYNCO.CO.NZ
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>