VYNCO VM85SK VM Surface Mount Kit Installation Guide
- June 5, 2024
- VYNCO
Table of Contents
VYNCO VM85SK VM Surface Mount Kit
SAFETY
The VM Surface Mount Kits are intended to be surface mounted onto a wall and
then one of the boards in the Vynco VM range (VM17, VM34, VM51, VM68 and VM85)
can be fitted to its respective surface mount kit. These kits can be used for
new installs or in a retro-fit situation to replace old style boards.
There are ample knockouts and cable entries to accommodate almost any wiring
layout.
WARRANTY
This product is covered by a 1 Year Vynco Warranty – proof of purchase is
required. Please contact Vynco for details of returns procedure.
NOTE: This product contains NO user serviceable parts.
INSTALLATION PROCEDURE
- STEP 1: Screw the surface mount enclosure securely to the wall.
- STEP 2: Fit VM board into enclosure and line up the fixing holes with the M6 rivnuts. Using the M6 screws supplied, screw the respective VM board into the surface mount kit.
- STEP 3: Fit off cover assembly as per normal wall installation using screws supplied.
SPECIFICATIONS
- Material: Powder coated steel
DIMENSIONS
- VM17SK: 341 x 411 x 107mm
- VM34SK: 491 x 411 x 107mm
- VM51SK: 641 x 411 x 107mm
- VM85SK: 976 x 411 x 107mm
VYNCO INDUSTRIES (NZ) LIMITED CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011 PO Box 9022, Tower Junction,
Christchurch 8149 New Zealand
P +64 3 379 9283 F +64 3 379 6838 Email:
[email protected] site :
VYNCO.CO.NZ