VYNCO VM51 51 Way Distribution Board Instruction Manual

June 5, 2024
VYNCO

VYNCO VM51 51 Way Distribution Board

SAFETY

This product complies in full with AS/NZS 61439.3. This product should be installed by a suitably qualified person in accordance with Australian and New Zealand wiring rules.

INSTALLATION PROCEDURE

This product is designed to be installed inside a wall cavity only (flush mounting). Do not surface mount. For surface, mounting use VM51SK surface mount enclosure in conjunction with this board.The metal wall enclosure must be earthed. Fold out tags (x4) on the side walls of the enclosure can be folded out to set the correct height onto the studs. Door hinge pins are easily removable and the door can be reversed so that it swings either left or right. This product is designed to be used with New Zealand and Australia’s MEN system. DO NOT install a link between the neutral bars and earth bar on circuits dedicated to RCDs. Please ensure circuits and protective devices are adequately identified during installation.

SPECIFICATIONS

SPECIFICATIONS

Rated Operational Voltage| 415V AC maximum, 50Hz
Maximum Current| 100A
Rated Insulation Voltage| 1000V
Short Circuit Withstand| 10kA

DIMENSIONS

DIMENSIONS

Cover Assembly| 628 x 402 x 35mm
Base (cut out size)| 582 x 355 x 93mm

WARRANTY
This product is covered by a 1 Year Vynco Warranty – proof of purchase is required. Please contact Vynco for details of returns procedure.
NOTE: This product contains NO user serviceable parts.

EARTH AND NEUTRAL BUSBAR LAYOUT

EARTH AND NEUTRAL BUSBAR LAYOUT

| Material| Number of Bars| Double Screw Tunnels| Single Screw Tunnels
Earth Bar| Brass steel| 1| 3| 40
Neutral Bar| Brass steel| 1| 4| 22
RCD Neutral Bar| Brass steel| 8| 1| 3

REMOVING DOOR

  • STEP 1
    Rotate the top pin 90°.

  • STEP 2
    Slide pin down to release door. There is no need to remove the pin completely.

  • STEP 3
    Lift and remove the door.VYNCO VM51 51 Way Distribution Board-
fig4

  • FITTING DIAGRAM
    To fit into wall cavity, fold-out tabs to set the height of the enclosure onto studs.

VYNCO INDUSTRIES (NZ) LIMITED CHRISTCHURCH

388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P +64 3 379 9283 F +64 3 379 6838
E sales@vynco.co.nz

AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P +64 9 525 6051 F +64 9 525 5799

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals