VYNCO VM34 34 Way Distribution Board Installation Guide
- June 2, 2024
- VYNCO
Table of Contents
VYNCO VM34 34 Way Distribution Board
SPECIFICATIONS
| Rated Operational Voltage | 415V AC maximum, 50Hz |
|---|---|
| Maximum Current | 100A |
| Rated Insulation Voltage | 1000V |
| Short Circuit Withstand | 10kA |
DIMENSIONS
| Cover Assembly | 478 x 402 x 35mm |
|---|---|
| Base (cut out size) | 432 x 355 x 93mm |
WARRANTY
This product is covered by a 1 Year Vynco Warranty – proof of purchase is required. Please contact Vynco for details of returns procedure.
NOTE: This product contains NO user serviceable parts.
SAFETY
This product complies in full with AS/NZS 61439.3.
This product should be installed by a suitably qualified person in accordance with Australian and New Zealand wiring rules.
INSTALLATION PROCEDURE
This product is designed to be installed inside a wall cavity only (flush mounting). Do not surface mount.
For surface mounting use VM34SK surface mount enclosure in conjunction with this board.
The metal wall enclosure must be earthed. Fold out tags (x4) on the side walls of the enclosure can be folded out to set the correct height onto the studs.
Door hinge pins are easily removable and the door can be reversed so that it swings either left or right. This product is designed to be used with New Zealand and Australia’s MEN system.
DO NOT install a link between the neutral bars and earth bar on circuits dedicated to RCDs. Please ensure circuits and protective devices are adequately identified during installation.
EARTH AND NEUTRAL BUSBAR LAYOUT
| Material| Number of Bars| Double Screw Tunnels| Single
Screw Tunnels
---|---|---|---|---
Earth Bar| Brass steel| 1| 3| 30
Neutral Bar| Brass steel| 1| 4| 14
RCD Neutral Bar| Brass steel| 5| 1| 3
REMOVING DOOR
STEP 1
Rotate top pin 90°.
STEP 2
Slide pin down to release door. There is no need to remove pin completely.
STEP 3
Lift and remove door.
FITTING DIAGRAM
To fit into wall cavity, fold out tabs to set height of enclosure onto studs.
Customer Support
VYNCO INDUSTRIES (NZ) LIMITED CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P +64 3 379 9283
Esales@vynco.co.nz
VYNCO.CO.NZ
AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P +64 9 525 6051
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>