VYNCO LOC275 Ocean LED Round Oyster Light Instruction Manual

June 1, 2024
VYNCO

VYNCO LOC275 Ocean LED Round Oyster Light

Product Specifications

  • Rated Operational Voltage: 100-240V AC 50Hz
  • Color Temperature: 3000K / 4000K / 5700K
  • IP Rating (Front Body): IP54
  • IK Rating: IK08
  • Material: Polycarbonate

Product Usage Instructions

Installation Instructions

  1. STEP 1: Separate the base and cover. Screwdriver not supplied.
  2. STEP 2: Pre-drill the mounting hole position and secure it with the fasteners provided in the accessory kit.
  3. STEP 3: Connect the wires: L = Active, N = Neutral (Brown/Red, Blue/Black).
  4. STEP 4: Secure the pigtail connection. Adjust CCT and wattage accordingly to suit desired color temperature and brightness. Select initial power.
  5. STEP 5: Align the light fitting.
  6. STEP 6: Lock the product into place once secured.

INSTALLATION INSTRUCTIONS

  • Separate the base and cover.
  • Screwdriver not supplied.VYNCO-LOC275-Ocean-LED-Round-Oyster-Light-FIG-4
  • Pre-drill the mounting hole position and secure with fasteners provided in the acessory kit
  • Secure the pigtail connection.
  • Lock the product into place once secured.

VYNCO-LOC275-Ocean-LED-Round-Oyster-Light-FIG-8COMPLETE

Specifications

Rated Operational Voltage 100-240V AC 50Hz
Colour Temperature 3000K / 4000K / 5700K
IP Rating (Front Body) IP54
IK Rating IK08
Material Polycarbonate

Other specifications such as wattage & lumen output refer to the Ocean Oyster range specifications on our website at www.vynco.co.nz

DIMENSION

LOC275 DIMENSIONS

Diameter| Ø 275mm
Depth| 48mm
LOC350 DIMENSIONS
Diameter| Ø 350mm
Depth| 48mm

SAFETY

This product shall be installed by a qualified electrician by the AS/NZS Wiring Rules.

  • Turn off the power supply before installation or before doing any maintenance work.
  • Switch on only after complete installation and examination of the circuit.
  • Do not install any luminaire near the heat source.
  • IP54 can be used in damp locations – it is not fully weatherproof.
  • Do not exceed the nominal supply voltage.
  • Take care not to pull out any electrical wires during unpacking as this may damage the connection.
  • Lay out all the components on a smooth surface and make sure no components are missing before assembling.
  • To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
  • Please keep instructions for future reference.

WARNING

  1. Ensure that the power supply is isolated before any installation or maintenance work.
  2. Switch on only after complete installation and examination of the circuit.
  3. All wiring and installation of the light fitting must adhere to AS/NZS 3000 wiring rules and be undertaken by a qualified electrician.

WARRANTY

  • The Ocean Oyster light is guaranteed for 3 years from the date of purchase.
  • This warranty protects against defects in workmanship and material. Any defects will be rectified by replacement if the goods are returned to the place of purchase, with proof of purchase, and with a brief explanation of the experienced fault.
  • The warranty does not include compensation for any associated expenses involving installation or removal, such as labor or travel.
  • This warranty becomes null and void if, in our opinion, the product has been misused, tampered with, incorrectly installed, or subjected to power surges.

VYNCO INDUSTRIES (NZ) LIMITED CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011 PO Box 9022, Tower Junction, Christchurch 8149 New Zealand

AUCKLAND

  • 9 Levene Place, Mount Wellington
  • A PO Box 12 249, Penrose, Auckland 1061 New Zealand
  • P +64 9 525 6051

VYNCO.CO.NZ

FAQ

Q: Who should install the product?

A: This product should be installed by a qualified electrician following the AS/NZS Wiring Rules.

Q: What is the warranty period for the product?

A: The Ocean Oyster light is guaranteed for 3 years from the date of purchase. Warranty covers defects in workmanship and material.

Q: What actions can void the warranty?

A: The warranty becomes null and void if the product has been misused, tampered with, incorrectly installed, or subjected to power surges.

Q: How can I claim warranty service?

A: To claim warranty service, return the product to the place of purchase with proof of purchase and a brief explanation of the fault experienced.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals