au KYG01 Torque 5G Smartphone User Guide

au KYG01 Torque 5G Smartphone

Using the Online Manual (Japanese)
For detailed descriptions of various functions, refer to the “Online Manual” (Japanese) following the procedure below: Swipe up the Home screen →(Online Manual)] The “Online Manual” (Japanese) is also available on the au homepage: https://www.au.com/online-manual/kyg01/ (Japanese) April 2021, 1st Edition

• Sales: KDDI CORPORATION OKINAWA CELLULAR TELEPHONE COMPANY
• Manufactured by : KYOCERA Corporation

List of Packaged Items

Make sure that you have all the following packaged items with the product.

• Main unit
  • Front screen (KYG01KGA) pasted on Display/Front cover (KYG01VRA, KYG01VKA, KYG01VYA) installed on front of main unit
• Back cover (KYG01TRA, KYG01TKA, KYG01TYA)
  • Installed on back of main unit
• Battery pack (KYG01UAA)
• LOCK Rotating Tool (sample)
• Hexagon Wrench (sample)

The following items are not included in the package.

• AC adapter
• USB Type-C™ cable
• Wireless Charging Pad
• KYOCERA 3.5ΦType-C conversion cable (0401QNA)
• microSD memory card
• Earphone

Names and Functions of Parts

1. Strap eyelet

2. Volume up/down button
   Adjust media sound volume such as music or videos.

3. Direct button
   Press and hold or press twice consecutively to activate the set function.

4. In-camera (lens)

5. Receiver/speaker
   Hear the other party’s voice on call, playback sound of the auto answering, etc.

6. Proximity sensor/Light sensor
   If the sensor part becomes covered during a call, the proximity sensor turns the display off to prevent erroneous touch panel operation. Light sensor detects the ambient light level to adjust the display brightness.

7. Incoming (charging) lamp
   Lights in red during charging. Flashes in blue for a missed call or new mail.

8. Front cover
   Remove when performing maintenance or replacing the front screen. For details on attaching/removing the front cover, refer to (Full Instruction Manual)” (Japanese).

9. Display (touch panel)

10. Mouthpiece (microphone)/speaker/atmospheric pressure sensor
    Relays your voice to the other party. Or used to record voice sound. Take care not to cover the mouthpiece (microphone) with your fingers, etc. during calling or video recording.

11. USB cover
    The opening in the cover is a necessary part of its waterproof construction. Do not poke with a pointed object or block it.

12. External connection terminal
    Used to connect Type-C Common AC Adapter 02 (sold separately), etc.

13. Power button/fingerprint sensor
    Use to turn on/off, activate/deactivate the sleep mode. If a fingerprint is registered, unlock the screen by fingerprint authentication.

14. Camera button
    Press and hold to activate the camera. Also use as shutter for still photos/movie and underwater camera screen. Depending on the setting, functions other than the camera can also be activated.

15. *Built-in GPS antenna1**

16. *Built-in sub antenna1**

17. *Built-in Bluetooth/Wi-Fi antenna1**

18. *NFC (FeliCa compatible) antenna1**
    Holdover a reader/writer when using Osaifu-Keitai®. Send or receive data via IC transmission.

19. *5G main antenna1**

20. *5G sub antenna1**

21. *Wireless charging area1**
    For wireless charging, place the “R” letter of “TORQUE” logo on the q mark on a wireless charging pad (commercially available).

22. *Back cover2**

23. Lock knob

24. *Built-in main antenna1**

25. Out camera (lens)

26. Wide camera (lens)

27. Shooting/simple light

28. Wireless charging antenna connection terminal

29. au IC card/microSD memory card tray

30. Battery pack
    Under the battery pack, au IC card slot and microSD memory card slot are found.

31. Battery lock

32. *Wireless charging antenna/charging connection area2**

Note:

• Do not cover antennas with your hand or put stickers, etc. Doing so may affect calling/communication quality or wireless charging.
• Avoid adhering stickers, etc. on the back cover where the wireless charging antenna/charging connection area are located. Doing so may affect wireless charging.

Memo

• It is not guaranteed that this product can be charged with every wireless charger product with a q mark.
• Do not put stickers, etc. on the proximity sensor/light sensor.
• Moving your face off from the proximity sensor during a call causes malfunctions such as holding or muting a call. During a call, keep your ear on the proximity sensor.
• Product is equipped with an atmospheric pressure sensor. You can display barometric pressure and elevation when using a barometric display app, however, values are not absolute due to a number of variables, and are approximate only.
• Do not remove the film sheet from the mouthpiece (microphone)/speaker/atmospheric pressure sensor.
• A front screen is adhered to the product to protect the display (touch panel). If the screen becomes damaged or worn, it can be replaced with the front screen (KYG01KGA) (sold separately).

Attaching the au IC Card (SIM Card)

Attach the au IC card after turning off the product.

1. Use the LOCK Rotating Tool (sample) to turn the lock to “FREE”

2. Remove the back cover on the back side of the product
   Lift the back cover by the center notch of the cover using fingertips (fingernail, etc.) in the direction of the arrow to remove

3. Slide the battery lock to the (open) direction
   The battery lock is unlocked and the battery pack is also released.

4. Remove the battery pack
   Use one hand to catch the battery pack as shown, and tap the product while bringing hands together to remove.

5. Pull out the au IC card/microSD memory

6. With the IC (metal) part facing down, fit card tray straight the au IC card into the au IC card/microSD memory card tray Note the orientation of the notch. Fit the au IC card into the au IC card/microSD memory card tray so that the au IC card does not shift. Notch

7. Insert the au IC card/microSD memory card tray into the slot straight until it stops
   Note: Do not use a screwdriver, etc. to remove the battery pack. Doing so may damage the battery pack.

8. Attach the battery pack
   Confirm the position of connection, and then slide the battery pack in and press it firmly into place. Install the battery pack after confirming the au IC card/microSD memory card tray is properly inserted.

9. Slide the battery lock to the (close) direction
   The battery lock is locked and the battery pack is fixed.

10. Attach the back cover
    Insert the back cover diagonally from the two claws on the edge of the back cover

    • and then push the bottom end of the back cover
    • to fit it.

11. Press the back cover where shown by the arrows making sure the cover is pressed down completely around
    The back cover can be closed only when the battery lock is locked.

12. Use the LOCK Rotating Tool (sample) to turn the lock to “LOCK”
    Avoid tightening more than necessary. Doing so may cause damage. The lock knob can be turned to “LOCK” only when the  battery lock is locked
    Note: Attaching incorrectly may cause damage to the battery pack.

Turning the Power On/Off

Turning the Power On

1. Press and hold F (Power button) until the incoming light turns on
   The start screen is displayed For the first time you turn on the product, the initial setting activates.
   Memo:

   • When logos are being displayed on the screen, do not touch the screen because the initial setting of the touch panel activates. Doing so may prevent the touch panel from working properly.
   • If you skip the operation of the initial settings at the first start-up, you can set later.

Turning the Power Off

1. Press and hold F (Power button) for at least 1 second
2. [Power]→[Power off]

Forcing the Product to Shut Down and Restart

You can force the product to power off and reboot when the screen does not respond, or the power cannot be turned off.

1. Hold down F (Power button) and (Volume up button) at the same time for at least 11 seconds
   Memo: If you turn off the product forcibly and restart, any unsaved data will be lost. Do not perform except when the product does not respond.

Switching to English Display

You can switch the language displayed on the screen to English.

1. Swipe up the Home screen → (Settings)] →  (System)] →  (Languages & input)] → (Languages)]
2. [English] Applications, mail transmission/reception, and downloads may be terminated.) appears, confirm the message and then tap [OK].

Cell phone and PHS operators collect and recycle unused telephones, batteries and battery chargers at stores bearing the logo regardless of brand and manufacturer to protect the environment and reuse valuable resources.

For inquiries, call: Customer Center

For general information   (toll free): Business hours 9:00 to 20:00 (7 days a week) From au mobile phones: 157 area code not required

For theft, loss, or malfunction   (toll free): Business hours 24-hour (7 days a week) From au mobile phones: 113 area code not required

Repair and Delivery Support Center: Business hours 9:00 to 20:00 (7 days a week) From au mobile phones / non-au mobile phones /general subscriber phones: 0120-925-919

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>