BASS JAXX HP0265 Wireless Headphone Instruction Manual
- June 6, 2024
- BASS JAXX
Table of Contents
BASS JAXX HP0265 Wireless Headphone
Introduction
Congratulations, and thank you for choosing the 2IN1 Wireless & Wired Kid Safe Headphones. This manual will help you operate the 2IN1 Wireless & Wired Kid Safe Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the 2IN1 Wireless & Wired Kid Safe Headphones.
SAFETY RULES
- Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual.
- Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
- Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty.
- Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
- Do not use the Bluetooth headphones in a hazardous location.
Packaging Contents
Connection Diagram
How to use
Turn on &
Enter the pairing mode
|
Press and hold the On / Off Button for 3 seconds. After turning on, the LED indicator flashes red/blue.
---|---
Pairing
| Use a mobile phone with Bluetooth function or other Bluetooth devices to perform necessary pairing action.
After pairing, the LED indicator slowly blinks with blue.
Turn off
|
Press and hold the On / Off Button for 4 seconds.
Charging
| Plug the Micro USB to the Micro USB port. When charging, the LED
indicator turns red. After full charging, the LED indicator turns off.
Answering a Call| Press On / Off button to answer phone call, press On / Off button again to end call Press and hold 2 seconds to reject call.
Double click to redial last call.
Play / Pause Music|
Press Play / Pause button to play music and press it again to pause music.
Wired Mode| Connect one end of the included 3.5mm Aux-in cable on your headphone Aux-in port. Plug the other end of the 3.5mm Aux-in cable to your audio device.The device will be power off once Aux-in cable is plug in.
Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or another Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range.
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headphones, enter the pairing mode.
- Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds the phone will list the “BT KID SAFE HP” as a discovered device.
- Select it and follow your phone’s instructions to select this pairing.
- Your phone will confirm the pairing and then press Yes/OK.
Charging your headphones
For your safety, please always use an appropriate 5V input charger/Adapter to
charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product.
Use the Micro USB cable accessory provided with these headphones. Connect the
Micro USB plug to the Micro USB charging port on the headphones positioned 1at
in headphones diagram on page 2. Connect the USB plug to a USB port on a
computer or wall adapter to activate charging. Make sure to keep the
headphones charging for a minimum 2 hours before initial use.
Warning:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if it has not been used for more than 6 months.
Product Specification
- Driver Diameter: 40 mm
- Impedance: 32 Ohms
- Frequency Response: 20 Hz – 20 KHz Sensitivity: < 85 dB
- Power Supply: Li-ion Battery 3.7V 200 mAh Playing Time: 2 – 3 Hours
- Charging Time: 2 Hours
- Bluetooth Range: 32.8 Feet
- Micro USB Cable Included
- 3.5mm Aux-in Cable Included
FAQ
-
Why is there no power even when the headphones is turned on ?
Ans: Ensure the battery has been charged up to -
There is no sound when playback.
Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or another master device.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
- The input voltage to the product is 5V 1A.
- n order to charge the product in safe manner and reliable conditions,
- Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
- In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>