Honeywell ScanPal EDA61K Series Mobile Computer Powered User Guide

Honeywell ScanPal EDA61K Series Mobile Computer Powered

Specifications

• Model: ScanPal EDA61K Series
• Operating System: AndroidTM
• Battery: Li-ion 3.6 V battery
• Memory Card: Single Level Cell (SLC) industrial grade microSDTM or microSDHCTM recommended

Install a Micro SIM Card

1. Ensure the device is powered off.
2. Locate the Micro SIM card slot on the device.
3. Insert the Micro SIM card into the designated slot.
4. Power on the device to enable cellular phone features supported.

Install a microSD Card (Optional)

1. Power off the device.
2. Format the microSD card before inserting it into the device.
3. Insert the microSD card into the designated slot.

Install the Battery

1. Align the battery with the compartment and insert it firmly.
2. Secure the battery latch to ensure it stays in place.

Charge the EDA61K
Charge the device using the provided charging device for a minimum of 5 hours. Avoid using the device while charging for optimal charging speed.

Turn Power On/Off
To turn on/off the device, press and hold the Power button as instructed in the manual.

Adjust the Screen Timeout

1. Access Settings > Display > Screen timeout on the device.
2. Adjust the sleep time according to your preference.

Frequently Asked Questions (FAQ)

1. Q: What type of memory cards are recommended for use with the ScanPal EDA61K?
   A: Honeywell recommends using Single Level Cell (SLC) industrial-grade microSDTM or microSDHCTM memory cards for optimal performance and durability. Contact a Honeywell sales representative for more information on qualified memory card options.

2. Q: How do I enable Provisioning mode for installing applications on the ScanPal EDA61K?
   A: After completing the out-of-box setup, Provisioning mode is automatically turned off. To enable it, navigate to the Settings app and follow the instructions in the user guide to scan a barcode for installing applications, certificates, configuration files, and licenses.

ScanPal™ EDA61K Series
Mobile Computer powered by Android™

Quick Start Guide

Out of the Box
Make sure that your shipping box contains these items:

• ScanPal Mobile Computer
  (Model EDA61K-0 or EDA61K-1)

• Rechargeable 3.6 V Li-ion battery

• Product Documentation

If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service.
Note: EDA61K-0 models do not include a WWAN radio.

Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with ScanPal mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options.

Mobile Computer Features

Install a Micro SIM Card

Note: Only EDA61K-1 (WWAN) models support micro SIM card use for cellular phone features.

Note: Always power off the computer before attempting to install or remove a card.

Install a microSD Card (Optional)
Note: Format the microSD card before initial use.

Note: Always power off the computer before attempting to install or remove a card.

About the Battery

The EDA61K ships with a Li-ion 3.6 V battery manufactured for Honeywell International Inc.

Before you attempt to use, charge or replace the battery in the device, carefully read all labels, markings and product documentation provided in the box or online at sps.honeywell.com. To learn more about Battery Maintenance for Portable Devices, go to honeywell.com/PSS- BatteryMaintenance.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.

Install the Battery

Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty.

Install Hand Strap (Optional Accessory)

Charge the EDA61K
The EDA61K mobile computer ships with a partially charged battery. Charge the battery with an EDA61K charging device for a minimum of 5 hours. Using the computer while charging the battery increases the time required to reach a full charge.

We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
EDA61K mobile computers are designed for use with the following EDA61K charging accessories: Home Base, Quad charger, and USB Cable. For information about accessories, see the ScanPal EDA60K/EDA61K Series Enterprise Mobile Computer Accessories Guide” at sps.honeywell.com.

Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

Turn Power On/Off
The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode (see page 14) is automatically turned Off (disabled).

To turn the computer On

• Press and hold the power button for approximately 3 seconds, and then release.

To turn the computer Off

1. Press and hold the Power button until the options menu appears.
2. Touch Power off.

Note: You should always power Off the computer before removing the battery.

Remove the Battery

Battery Replacement

Hot Swap
You can replace the battery on demand provided the following conditions are met:

• The computer has been powered on for at least 4 minutes. AND
• You insert a new battery within 30 seconds.

Screen Timeout
The screen timeout (sleep mode) automatically turns the touch panel display Off and locks the computer to save battery power when the computer is inactive for a programmed period of time.

1. Press and release the Power button to wake the computer.
2. Drag the lock icon toward the top of the display to unlock the computer.

Adjust the Screen Timeout
To adjust the amount of time before the display sleeps after inactivity:

1. Swipe up on the Home screen.
2. Select Settings > Display > Screen timeout.
3. Select the amount of time before the display goes to sleep.
4. Press to return to the Home screen.

About the Home Screen

To learn how to customize the Home screen, see the user guide.

Navigation and Function Buttons

For button locations, see Mobile Computer Features.

About Provisioning Mode
After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide.

Scan a Barcode with the Scan Demo
For optimum performance, avoid reflections by scanning the barcode at a slight angle.

1. Swipe up on the screen to access all apps.
2. Select Demos > Scan Demo.
3. Point the computer at the barcode.
4. Touch Scan on the screen or press and hold any Scan button. Center the aiming beam over the barcode.

The decode results appear on the screen.
Note : In the Scan Demo app, not all barcode symbologies are enabled by default. If a barcode does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide.

Sync Data

To move files between your EDA61K and your computer:

1. Connect the EDA61K to your computer using a USB charge/communication dock or snap on.
2. On the EDA61K, swipe down from the top of the screen to see the notifications panel.
3. Select the Android System notification twice to open the options menu.
4. Select either File Transfer or PTP.
5. Open the file browser on your computer.
6. Browse to the EDA61K. You can now copy, delete, and move files or folders between your computer and the EDA61K as you would with any other storage drive (e.g., cut and paste or drag and drop).

Note: When Provisioning mode is turned Off, some folders are hidden from view in the file browser.

Restart the Mobile Computer
You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up.

1. Press and hold the Power button until the options menu appears.
2. Select Restart.

To restart the computer if the touch panel display is unresponsive

• Press and hold the power button for approximately 8 seconds until the computer restarts.

Note: To learn about advanced reset options, see the user guide.

Support
To search our knowledge base for a solution or to log in to the Technical Support portal and report a problem, go to honeywell.com/PSStechnicalsupport.

Documentation
Product documentation is available at sps.honeywell.com.

Limited Warranty

For warranty information, go to sps.honeywell.com and click Support > Productivity > Warranties.

Patents
For patent information, see www.hsmpats.com.

Disclaimer

• Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. HII makes no representation or warranties regarding the information provided in this publication.
• HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.
• This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Copyright  2023 Honeywell Group of Companies. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>