SIGURO SGR-FC-H350W 5-In-1 Air Cooler Heater and Air Purifier Instruction Manual

: June 5, 2024
: SIGURO

Table of Contents

SIGURO SGR-FC-H350W 5-In-1 Air Cooler Heater and Air Purifier
Overview
SAFETY INFORMATION
DESCRIPTION OF THE APPLIANCE
REMOTE CONTROL BUTTONS
FEATURES AND FUNCTIONS
QUICK CONTROL GUIDE
INSTALLATION
USE
Automatic appliance shutoff function
Using the remote control
CLEANING AND MAINTENANCE
DISPOSAL OF USED BATTERIES
Information requirements for local electric heaters
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SIGURO SGR-FC-H350W 5-In-1 Air Cooler Heater and Air Purifier

Thank you for purchasing a SIGURO appliance. We are grateful for your trust and are pleased to introduce the device to you on the following pages and introduce you to all its functions and uses.
We believe in a fair and responsible company, and therefore we only work with suppliers who meet our strict criteria of protecting the interests of their employees, preventing their abuse, and providing fair working conditions.

If you need help with extensive maintenance or repair of the product, which requires intervention in its internal parts, our authorized service is available at the email address [email protected] or operators at the seller’s info line. For your convenience in solving any problems with the product, we have unified these contact points and the above contacts can be used in the event of any complaints or post-warranty service.

Overview

SIGURO-SGR-FC-H350W-5-In-1-Air-Cooler-Heater-and-Air-Purifier-
fig-1

SAFETY INFORMATION

Please read this manual carefully before use and keep it for future reference.

This appliance is intended for use by children 8 years of age and older and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning the use of the appliance in a safe manner and understand the potential hazards.
Children must not play with the device. Cleaning and user maintenance must not be performed by children without supervision.
It is forbidden to use the appliance with a damaged power cord. If the supply cord is damaged, contact an authorized service center to have it replaced to avoid a hazardous situation.
DO NOT COVER. Do not cover the appliance to prevent overheating.
The appliance must not be placed immediately below the electricity outlet.
Do not use this appliance in the immediate vicinity of a bath, shower or swimming pool.
WARNING: This appliance is not equipped with a room temperature control device. Do not use this appliance in a small room if it is occupied by people who are unable to leave this room on their own, unless permanent supervision is provided.
This appliance is designed to be free-standing. This appliance is not intended for wall mounting.
Attach the castors to the appliance according to the instructions in this manual.
Children under the age of 3 should be denied access to the appliance unless they are constantly supervised.
Children between the ages of 3 and 8 may only switch this appliance on / off if it has been placed or installed in its intended normal operating position and if they are supervised or instructed in the safe use of the appliance and understand the potential dangers. Children between the ages of 3 and 8 must not insert the plug into the outlet, regulate and clean the appliance or perform user maintenance.
WARNING: Some parts of this product may become very hot and cause burns. Special attention must be paid to the presence of children and handicapped people.
Do not use this appliance if it fell.
Do not use this appliance if there are visible signs of damage.
Use this appliance only on a level and stable surface. Do not use the appliance attached to the wall.
WARNING: To reduce the risk of fire, keep fabrics, curtains or any other flammable material at least 1 m from the air outlet.
Make sure that the appliance is disconnected from the outlet before removing the protective grille.
When filling the water tank, always observe the minimum and maximum lines marked on the tank.
Follow the instructions in the “Cleaning and maintenance” section to clean the appliance.
Pay attention when the appliance is in humidification mode since it produces water vapor.
When filling or cleaning, unplug the appliance by pulling the plug out of the outlet.
The appliance is not intended for connection to water pipes.
Be aware that high humidity values can support the growth of biological organisms in the environment.
Do not allow the area around the appliance to get moist or wet. If this happens, switch the appliance to lower power. If this is not possible, use the appliance intermittently. Do not allow absorbent materials such as carpets, curtains, drapes, or tablecloths to become wet.
Never leave water in the tank when the appliance is not in use.
Empty and clean the water tank before storing the appliance. Clean it before using the appliance again.
Before connecting the plug to the outlet, make sure that the voltage in your outlet corresponds to the voltage indicated on the type plate of the appliance.
Only connect the appliance to a properly grounded outlet. The electrical outlet to which you connect the appliance must be freely accessible so that the power cable can be quickly disconnected from the power supply if necessary.
Install the power cable so that nobody can trip over it.
Do not touch the power cord, its plug or the appliance when it is connected to the electrical outlet with wet hands.
The appliance is intended for indoor use only. Do not use it outdoors.
Do not expose the appliance to heat or direct sunlight.
Make sure before each use that the appliance is assembled correctly.
Do not use the appliance to store objects.
When not in use, switch off the appliance, unplug it, and clean it according to the instructions in this manual.
Unplug the appliance by pulling on the plug, not the cord. Otherwise, the power cord or outlet may be damaged.
Do not use this appliance with a program, timer, remote control system, or any other component that switches the appliance on automatically.
Make sure that the fan inside the appliance turns freely when the appliance is in operation.
Do not insert any objects or fingers, hands, hair, or loose clothing into or near the inlets or outlets of the appliance. It could catch on the internal fan and result in injury or damage to the appliance or property.
If the appliance is equipped with castors, take extra care when handling it, so for example it does not fall down the stairs or on a sloping surface. To prevent the appliance from tipping over, do not try to run the wheels over the carpet, threshold, etc.
Take extra care when children move around the appliance, especially when it is turned on.
Do not use the appliance in places where gasoline, paints, or other flammable substances are stored.
Always switch off the appliance and disconnect the plug from the outlet when you are not using the appliance, if you leave it unattended, before cleaning, disassembling, assembling or performing routine maintenance.
Use the appliance only in accordance with the instructions given in this instruction manual.
Keep the appliance clean. Check it regularly.
Do not use the appliance without properly installed filters.
Always pour clean, cold water into the tank.
Move, store and transport the appliance in a vertical position.
Do not attempt to disassemble the outer casing of the appliance.
If you notice an unpleasant odor or noise during use, stop using the appliance, switch it off and unplug the power cord from the outlet. Contact an authorized service center.
The appliance’s remote control uses a battery to power it. Do not swallow the battery. There is a risk of chemical burns, even in a very short time, which can lead to death. If swallowing of a battery is suspected, seek medical attention immediately.
Keep batteries out of the reach of children.
Dispose of used batteries in an environmentally friendly manner.

DESCRIPTION OF THE APPLIANCE

Control panel
Display
Horizontal slats
Front cover
Castors
Remote control storage space
Main switch
Back cover
Protective grille
Microfilter
HEPA filter
Cooling filter
Water tank locks
Water tank
Power cord
Remote control
Cooling containers (2 pcs in a package)

REMOTE CONTROL BUTTONS

DESCRIPTION OF THE CONTROL PANEL AND REMOTE CONTROL BUTTONS

MODE button
Used to select the operating mode.

TIMER button
Used to set the automatic shutoff time.

HEATER button
Used to switch the heater function on / off.

COOLER / HUMIDIFIER button
Used to turn on / off the cooling and humidifier functions.

SPEED button
Used to set the fan speed.

SWING button
Used to turn on / off the rotation of the vertical slats left and right.

ON/OFF button
Used to turn the appliance on / off.

Input voltage	220–240 V ~
Frequency	50 Hz
Power consumption
Cool air	110 W
Warm air (low power)	1200 W
Warm air (high power)	2000 W
Noise	≤ 66 dB
Energy efficiency	5 W / W
Dimensions (L x D x H)	346 x 314 x 823 mm
Weight	9.7 kg

FEATURES AND FUNCTIONS

Operating modes of the fan: normal, smart, natural airflow, and sleep. Normal mode is automatically set when turned on. The display is off in normal mode.
Four fan speed settings: high, medium, low, and very low fan speed.
Cooling / humidification function
Cool and hot air output: 110 W cold air, hot air: low power 1 200 W, high power 2 000 W.
Setting temperature in the range of 15–35 °C. If the room temperature is higher than the set temperature, the hot air output changes to cold.
Automatic shutoff function: automatic shutoff of the appliance when the set time elapses. You can set the time from 1 to 8 hours.
Setting the airflow as required: automatic rotation of the vertical slats left and right (rotation by 80 °), manual adjustment of the horizontal slats up and down.
With electronic button control, the numeric display shows the automatic shutoff time and room temperature
Remote control
Water tank: simple filling and maintenance
Large cooling filter: ensures high evaporation and cooling effect
Water spray cooling technology ensures faster cooling using the circulation of large amounts of water.
Protection against starting without water in the tank
Universal castors
Mode of storing the model in the appliance memory at shutoff.

QUICK CONTROL GUIDE

Appliance On/Off	Button ON/OFF
Fan speed setting	Press repeatedly the button SPEED.
Operating mode selection	Press repeatedly the MODE button

Turning the cooling/humidification

function on / off

| Button COOLER/HUMIDIFIER
Turning the heater function on / off| The button HEAT is used to set power and the button MODE is used to set temperature.
Drying of the cooling filter| Press and hold the button SPEED for 3 seconds.
Switching the vertical slats on/off| Button SWING
Opening and adjusting the angle of the horizontal slats| The horizontal slats must be opened manually either before starting the ap- pliance or after an audible warning.
Turning off the volume of the control buttons| Press and hold the buttons HEATER and COOLER/HUMIDIFIER at the same time for 3 seconds.

INSTALLATION

Assembling the castors
The castors are delivered separately from the factory and must be installed before use. To install them proceed as follows:

Put the appliance carefully on the floor. We recommend laying a blanket or other soft material on the floor to prevent damage to the appliance or the floor covering.
Remove the castors and screws from the package and fasten the castors to the bottom of the appliance using a screwdriver.
Make sure the screws are properly tightened.
Carefully stand up the appliance and make sure that the wheels move freely, are screwed straight and the appliance does not tilt to any side.

Warning:
Never use the appliance without the castors properly installed.

Note:
We recommend that two adults lay the appliance and place it on the floor.

Placement of the appliance
Place the appliance on a flat, dry and stable surface within reach of a properly grounded electrical outlet. To ensure sufficient air circulation, leave a space of at least 30 cm on all sides of the appliance.

USE

Before first use

Remove the appliance and its accessories from the packaging. Before disposing of the packaging, be sure to remove all components. Check that the appliance and any accessories are not damaged.
Remove all protective foils from the appliance and its accessories.
Remove the protective foam insert from the water tank and wash the tank in warm water with a little kitchen detergent to remove dirt and possible unpleasant odor. Rinse and wipe dry and put back in the appliance.
The HEPA filter is supplied packaged. The packaging must be removed before using the appliance. First, remove the protective grille and then take out the HEPA filter. Remove the protective packaging from the HEPA filter. Then put it back in the appliance and install the protective grille.
WARNING:
Never switch on the appliance with the packed HEPA filter, as this could seriously damage the appliance and create a dangerous situation.
Wipe the outside of the appliance with a soft sponge slightly dampened in warm water. Wipe dry.
To use the remote control, remove the protective film from the battery compartment. It protects the battery from discharge and damage during transport.

Appliance On/Off
Every time before turning it on making sure that the appliance is correctly assembled and that the tank is filled with water if you want to use the appliance in cooling / humidifying mode.

Plug the power cord into a properly grounded electrical outlet.
Set the main switch to position “I”. An audible warning sounds and the appliance switches to standby mode.
Press briefly the button ON/OFF, to turn on the appliance. An audible warning sounds and the appliance starts running in the default setting.

Default setting:

Operating mode: normal
The numeric display shows the room temperature and the room temperature light comes on.
The power light on the display is on, and the other lights are off.
Fan speed: medium speed is set for the first 3 seconds, and then switches to low speed. The low-speed light is on.

Note:

The default setting starts always when you turn off the appliance using the ON/OFF button, turn the main switch to the “O” position and disconnect the plug from the outlet. If you turn off the appliance only with the ON/OFF button, the next time you switch on the appliance, it will start in the last setting before it was switched off, except for the automatic shutoff mode and the sleep mode.
If the lights are fully on for 1 minute without any action, they will dim after 30 minutes to 30% of their original brightness. If you press any button, they will light up fully.
If you do not use the appliance, press the button ON/OFF to switch it to standby mode. To switch off the appliance completely, switch the main switch to position “O” and disconnect the plug from the outlet.

Numeric display
When the appliance is switched on, the numerical display shows the room temperature and the control “C” lights up. The temperature on the numeric display is displayed between -10 ° C to 40 ° C. If the ambient temperature is lower than -10 ° C, “LO” will appear on the numeric display; if the room temperature is higher than 40 ° C, “HI” will appear on the numeric display. If you set the automatic shutoff, the numeric display will alternate between the ambient temperature and the shutoff time.

Fan speed setting
Use the SPEED button to set the fan speed. Press repeatedly the button SPEED to select the required fan speed in the following order: low speed – medium speed – high speed – very low fan speed. Each time you press, the corresponding indicator light comes on.

Note:
Very low fan speed is only possible in normal mode.

Operating mode selection
The operating mode can only be selected if the appliance is set for cooling. Use the button MODE to select the operating mode. Press repeatedly the MODE button to select the required model: smart – natural airflow – sleep – normal. Each time you press, the corresponding indicator light turns on on the display, except for normal mode, which has no indicator light on the display. Each of the operating modes has a preset cycle of airflow and fan speed. Normal mode: the fan speed is constant. Natural airflow: the airflow is controlled automatically depending on the selected fan speed. This achieves the effect of a natural breeze.

Sleep mode
It is a combination of natural airflow mode and gradual reduction of speed, which prevents the unpleasant feeling of airflow at high speed during sleep. Select the initial fan speed (see section “Setting the fan speed”). The appliance will gradually lower the speed according to predefined rules.

Initial fan speed	The course of sleep mode
High speed	The appliance will run in natural airflow mode for 30

minutes at high fan speed. After 30 minutes, the high fan speed switches to medium speed. In another 30 minutes, the fan speed will be reduced to a low level. The appliance stays running at low fan speed.
Medium speed| The appliance will run in natural airflow mode for 30 minutes at medium fan speed. After 30 minutes, the medium fan speed switches to low speed. The appliance stays run- ning at low fan speed.
Low speed| The appliance will operate in natural airflow mode when the

fan speed is set to low.

Smart mode
It is not possible to set the fan speed in smart mode. It is adjusted automatically based on room temperature analysis. After selecting the smart mode, the appliance automatically starts sensing and analyzing the room temperature and adjusts the fan speed accordingly.

Ambient temperature	Set fan speed
Under 25 °C	Low speed
25 °C–29 °C	Medium speed
Above 29 °C	High speed

When the smart mode is selected, its indicator light flashes briefly.

Recommendation:
To ensure proper operation of the appliance in smart mode and correct temperature analysis, do not expose the appliance to direct sunlight or any heat sources. Place the appliance in a place where the air around the appliance can flow freely.

Automatic appliance shutoff function

Timer function

This function allows you to set the time for which the appliance will be in operation and after which it will switch off automatically.

First select the operating mode and fan speed – see the previous section.
Press briefly the TIMER button. The numeric display flashes and the indicator light “h” lights up on the display.
Press repeatedly the TIMER button to set the time from 1 to 8 hours in hourly steps.
Press and hold the TIMER button for 2 seconds to save the set time in memory. The set time appears on the numeric display and the countdown starts. The numeric display will gradually count down the set time in hourly steps, and the room temperature and the set time will be displayed alternately.
When the set time has elapsed, “0” will appear on the display and the appliance will automatically switch off and switch to standby mode.

If you do not confirm the set time by pressing and holding the TIMER button within 5 seconds or if you press another button, the whole automatic power shutoff would be canceled. The ambient temperature appears on the numeric display. If you need to turn off the countdown of the set time, press briefly the TIMER button, then wait until the numeric display flashes and press repeatedly the TIMER button to set the time to “0”. Confirm by pressing and holding the TIMER button for 2 seconds.

Cooling/humidification function
To be able to use the cooling/humidification function, the tank must first be filled with water.

Warning:
Never use the cooling/humidification function without water in the tank. Risk of damage to the appliance.

Make sure that the appliance is turned off with the ON/OFF button, the main switch is in the “O” position and the plug is disconnected from the outlet.
Turn the locks on the back of the appliance to the horizontal position and carefully remove the water tank.
Pour cold and clean water into the tank. Always follow the MIN (minimum amount of water) and MAX (maximum amount of water) lines.
Warning:
Never fill the tank above the MAX line. Water could spill into the appliance and damage it.
Insert the water tank into the appliance and turn the locks to the vertical position.
If you need to increase the cooling efficiency, put the supplied cooling containers in the freezer overnight and then put them in the water tank.
Warning:
Under no circumstances should you open, disassemble or otherwise damage the cooling containers. The liquid in the containers is not intended for consumption. If the container is opened and the contents are consumed, seek professional medical attention immediately.
Plug the power cord into the outlet, switch the main switch to position “I” and switch on the appliance with the button ON/OFF.
Select the cooling/humidification function by pressing the COOLER/HUMIDIFIER. button The cooling/humidification indicator lights up on the display. The appliance starts to evaluate if there is water in the tank and then starts cooling /humidifying. The evaluation may take a few seconds. Then the pump starts, which pumps water into the internal system. You may hear the pump sound regularly during operation. This is a normal occurrence.
As soon as a low water level in the tank is detected, the pump switches off automatically and an audible alert sounds for 10 seconds. Fill the tank with water -follow steps 1 – 4 above.
Warning:
Before removing and filling the water tank, always make sure that the appliance is switched off with the ON/OFF button, the main switch is in the “O” position and the plug is disconnected from the outlet.
After you fill the water tank, press the COOLER/HUMIDIFIER button to continue operating the appliance in this function.

Cooling filter drying function

This function is only used to dry the internal cooling filter. If the device will not be used for a long time and you want to store it, the cooling filter must be carefully dried to protect it from the formation of mold and unwanted microorganisms. Press and hold the button SPEED for 3 seconds to activate the drying function. The fan speed will automatically change to high speed and run for 20 minutes. During this time, the high fan speed indicator light will flash on the display. It is not possible to change the appliance settings in this mode. Only the ON/OFF button will be functional. After 20 minutes, the appliance automatically switches to standby mode. If you turn off the appliance during drying with the ON/OFF button and then turn on the appliance again, the appliance will operate in the last setting before you started the drying function. The appliance is not equipped with memory for this function. If you want to resume the drying function, press and hold the SPEED button for 3 seconds and the appliance starts again for 20 minutes.

Heater function
The heater function allows you to heat the air at the set power and temperature. However, it is important that the main motor is running while the heater is on. Once the heater is switched off, the main motor will run for about 30 seconds and then stop.

Power setting

While the appliance is on, press the HEAT button to activate the heater function. The appliance starts to heat and warm air starts to flow through the outlets. The fan speed will automatically be set to very low. The fan speed cannot be changed. The low power light comes on and the heater starts at low power.
Press the button HEAT again and after 10 seconds the heater starts operating at high power. The high power light comes on.
Press the HEAT button the third time and the heater turns off, the appliance stops heating, and after 10 seconds cool air starts flowing from the outlets.

Note:
Press the button HEAT again to reactivate the heater function.

Setting the temperature

While the appliance is turned on with the heater function, press again the MODE button The numeric display will flash and the “° C” indicator light will appear on the display.
Press again the MODE button and press it repeatedly to set the temperature in the range from 15 °C to 35 °C in 1-degree steps.
Press and hold the button MODE for 2 seconds to save the set temperature in memory. The set temperature shows on the numerical display.

Note:
If you need to change the temperature, follow the steps above. If you set the automatic shutoff function and the temperature of the heater, the automatic shutoff time and room temperature will be alternately displayed on the numeric display. Heating to the set temperature starts after about 10 seconds. This is a normal occurrence. If the ambient temperature reaches or exceeds the set temperature, the heater is switched off. The light indicator of heating power on the display turns off. Once the ambient temperature drops at least 2 ° C below the set temperature, the heater starts and the light indicator of the heater power appears on the display.

Turning on the movement of vertical slats
Press briefly the SWING button to turn on the movement of the vertical slats left and right. Press again the SWING button to cancel the movement.

Using horizontal slats
Whether using the appliance for cooling, cooling / humidifying or for heating in the first stage during normal use of horizontal slats are closed. Open the horizontal slats manually before the appliance starts or open them after an alert sounds. In this case, they should be open within 30 seconds. If the slats are not opened within 30 seconds the sound alert will continue to sound until you open them, but the selected function/setting will be paused. When you open the horizontal slats you will have to select again the function/setting.

Turning off the volume of the control buttons
Press and hold the buttons HEATER and COOLER/HUMIDIFIER in the same time for 3 seconds to mute the button sounds. To restore the volume, press and hold the buttons for 3 seconds.

Using the remote control

The buttons on the remote control correspond to the buttons on the control panel. The principle of control is the same as the above-described procedures of setting the appliance and its functions. The remote control is supplied with inserted batteries from the manufacturer. To use the remote control, remove the protective film from the battery compartment. It protects the battery from discharge and damage during transport. If you want to use the remote control, point it to the signal receiver on the appliance. The maximum range of signal sent from the remote control is 6 m. If obstacles are located between the remote control and the appliance, the signal cannot be transmitted.

If the inserted battery is empty it needs to be replaced by the same type. Proceed as follows:

Slide the cover with the battery compartment from the bottom of the remote control.
Remove the depleted battery and insert a new 3V CR2032 battery. Observe the correct polarity when inserting a battery.
Insert the cover with the compartment back into the remote control.

If you will not use the remote control for a long time, we recommend removing the battery. If the battery leaks into the interior of the remote control, it could damage it.

Warning:
Never put batteries on fire, short circuit, or damage them in any way. After the end of their lifetime, discard them in an environmentally friendly manner. Never dispose of batteries in household waste.

Protection against operation with an empty water tank
If the appliance detects that the water tank is empty or there is too little water, an alert will sound, the appliance’s operation is interrupted and the pump stops. Add water into the tank Follow the instructions in “The cooling/humidification” section.
If you press the COOLER/HUMIDIFIER button three times within 3 seconds after turning the appliance on, an audible alert sounds indicating quick detection of the water level in the tank. Press the buttons ON/OFF and COOLER/HUMIDIFIER one after another. The detection of the water level in the tank is evaluated within 5 seconds. If it is empty, an audible alert sounds.
Cancel the quick detection by pressing again the ON/OFF button.

Function of saving settings in memory in the event of a power failure
The appliance is equipped with a function for saving the settings made in memory if there is a power outage. If power is interrupted while the appliance has been switched on, an audible warning sounds 10 times after the power supply is restored and after about 30 seconds, the appliance starts in its original setting (except for the sleep function). When you press the ON/OFF button within 30 seconds after the power is restored the appliance should turn on immediately. If the power is interrupted while the appliance has been switched off (in standby mode), it will remain switched off (in standby mode) when the power supply is restored.

Automatic switch to standby mode
If the appliance is operated for 15 hours without changing the settings, it will automati-cally switch off and switch to standby mode. If you need to turn the function off, press and hold the buttons COOLER/HUMIDIFIER and SPEED at the same time for 3 seconds. An audible alert sounds to confirm your settings.

CLEANING AND MAINTENANCE

Before cleaning or any maintenance, always switch off the appliance, unplug the power cord from the outlet and allow it to cool down completely.

Warning:
Never immerse the appliance, the power cord or the plug of the power cord in water or any other liquid. Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol, solvents or other similar substances to clean any parts of the appliance. The surface finish could be seriously damaged.

Outer surface
Wipe the outside of the appliance with a cloth slightly dampened in warm water and wipe dry with a clean cloth.

Water tank
Empty the water tank and rinse with clean water after use. At least once a month, clean the water tank with a cloth dampened in lukewarm water with a little kitchen detergent to remove calcium deposits and prevent the growth of unwanted bacteria, microorganisms, or fungi. Then rinse it thoroughly with clean water and dry with a clean cloth.

Filter cleaning
During the use of the appliance, dirt settles on the filters (cooling, HEPA, and micro filter). These negatively affect the operation of the appliance and reduce its efficiency, and therefore must be cleaned regularly. The cleaning frequency depends on the frequency of use of the appliance, however, we recommend cleaning these filters regularly at least once a month.

Warning:
Make sure that the appliance is turned off with the ON/OFF button before each cleaning of the filters and that the main switch is in the “O” position and the plug is disconnected from the outlet.

Press the catch at the top of the protective grille and tilt it out together with the microfilter.
Then carefully remove the HEPA filter and cooling filter.
Soak the cooling filter in water with a little neutral detergent. Then squeeze gently by hand.
First remove the dirt from the HEPA filter and micro filter by careful tapping. We recommend doing it outside. Then use a soft sponge slightly dampened in clean water to remove the remaining dirt or you can use a vacuum cleaner with a brush nozzle and a set to allow suction power.
Insert the cooling filter into the appliance first, then the HEPA filter, and finally the microfilter.
Replace the protective grille and make sure it is securely locked. Correct locking is signaled by a click.
To dry the cooling filter properly, switch on the drying function (more instructions in the section “Cooling filter drying function”).

Storage
Before storing, make sure that the appliance and its accessories are cool and clean. Store the appliance and its accessories in a dry and well-ventilated place out of the reach of children or pets. Do not place any objects on the appliance.

Degree of protection against electric shock: II
Protection against electric shock is provided by double or reinforced insulation.

DISPOSAL OF USED BATTERIES

Batteries contain materials harmful to the environment. Do not dispose of batteries in a regular community waste. Dispose of used batteries properly at collection points.

Information requirements for local electric heaters

Model designation: SGR-FC-H350W