Joie i-Gemm 3 Infant Carrier Instruction Manual
- June 9, 2024
- Joie
Table of Contents
i-Gemm 3 Infant Carrier
Product Information
The i-Gemm 3, i-Juva, and i-Snug 2 are enhanced child restraint systems that are fully certified for child safety. These products are suitable for children with a height range of 40cm-85cm and a weight of up to 13kg for i-Gemm 3, and a height range of 40cm-75cm and a weight of up to 13kg for i-Juva and i-Snug 2.
These products comply with UN Regulation No.129 and are approved for use in i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle users’ manual. The materials used in the product include plastics, metal, and fabrics.
Product Usage
It is important to carefully read the instruction manual and follow the
installation steps to ensure the safety and comfort of your child while using
this product. Keep the instruction manual in the storage compartment at the
back of the base or inside of the seat covers for future reference.
Parts List
Please check that all parts are included before use. Contact your retailer if anything is missing. The parts list includes:
- Infant Carrier Rotation Button
- ISOFIX Adjustment Button
- Safe Use Indicator
- Load Leg
- Load Leg Adjustment Button
- Instruction Manual Storage Compartment
- ISOFIX Connector
- Child Restraint Release Button
- ISOFIX Guides
Installation with Base
Follow the steps below to install the product with the base:
- Attach the ISOFIX guides to the vehicle’s ISOFIX anchor points (refer to vehicle owner’s manual). The ISOFIX guides can protect the surface of the vehicle seat from being torn and guide the ISOFIX connectors.
- Unfold the load leg from storage compartment.
- Extend the ISOFIX connectors by pressing the ISOFIX adjustment button while pulling on the connector.
- Press the ISOFIX adjustment button to adjust the ISOFIX connectors. Line up the ISOFIX connectors with the ISOFIX guides, and then click both ISOFIX connectors into the ISOFIX anchor points.
- Make sure that both ISOFIX connectors are securely attached to the vehicle’s ISOFIX anchor points. There should be two audible clicks, and the colors of the indicators on both ISOFIX connectors should be completely green.
Warnings
Read the warnings given in the separate safety manual to ensure a secure
usage of the product. For complete information and best protection while using
this product, refer to the i-Gemm 3 instruction manual for use with i-Gemm 3,
i-Juva instruction manual for use with i-Juva, and i-Snug 2 instruction manual
for use with i-Snug 2.
Emergency
In case of emergency or accidents, seek immediate first aid and medical
treatment for your child.
Welcome to Joie™
You have purchased a high quality, fully certified child safety child
restraint. This product is suitable for the use of your child with height and
weight based on the following:
i-Gemm 3: child height 40cm – 85cm/ child weight≤13kg
i-Juva: child height 40cm – 75cm/ child weight≤13kg
i-Snug 2: child height 40cm – 75cm/ child weight≤13kg
Keep this instruction manual for future reference. Carefully read this Instruction Manual and follow the installing steps because this is the ONLY way to protect your child from serious injury or death in case of an accident, and to provide comfort to your child while using this product.
Please keep the instruction manual in the storage compartment at the back of the base as the image on the right or inside of the seat covers.
Parts List
Please make sure there are no missing parts. Please contact the retailer if
anything is missing.
- Infant Carrier Rotation Button
- ISOFIX Adjustment Button
- Safe use indicator
- Load Leg
- Load Leg Adjustment Button
- Instruction Manual Storage Compartment
- ISOFIX Connector
- Child Restraint Release Button
- ISOFIX Guides
WARNING
- CAREFULLY read the warnings given in the separate Safety Manual to ensure a secure usage of the product.
- For the complete information and best protection of using the enhanced child restraints, you must follow their instruction manuals carefully:
Please refer to i-Gemm 3 instruction manual for the use of i-Gemm 3. Please refer to i-Juva instruction manual for the use of i-Juva. Please refer to i-Snug 2 instruction manual for the use of i-Snug
Emergency
In case of emergency or accidents, it is most important to have your child
taken care of with first aid and medical treatment immediately.
Information
Installation with base
1. This is an i-Size Enhanced Child Restraint System. It is approved
according to UN Regulation No.129, for use in, i-Size compatible vehicle
seating positions as indicated by vehicle manufacturers in the vehicle users’
manual.
2. If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
- Materials: Plastics, metal, fabrics
- Patent No. Patents pending
Concerns on Installation
Base Installation
see images 1 – 13
-
Attach the ISOFIX guides to the vehicle’s ISOFIX anchor points (see vehicle owner’s manual). 1 The ISOFIX guides can protect the surface of the vehicle seat from being torn. They can also guide the ISOFIX connectors.
-
Unfold the load leg from storage compartment. 2
-
Extend the ISOFIX connectors by pressing the ISOFIX adjustment button while pulling on the connector. 3
-
Press the ISOFIX adjustment button to adjust the ISOFIX connectors. Line up the ISOFIX connectors with the ISOFIX guides, and then click both ISOFIX connectors into the ISOFIX anchor points. 4
- Make sure that both ISOFIX connectors are securely attached to the vehicle’s ISOFIX anchor points. There should be two audible clicks and the colors of the indicators on both ISOFIX connectors should be completely green. 4 -1
- Check to make sure the base is securely installed by pulling on both ISOFIX connectors.
-
After placing the base on the vehicle seat, extend the load leg to floor 5 . When the load leg is installed correctly, the load leg indicator will show green. Red will be shown when installed incorrectly. 5 -2
The load leg has multiple positions. When the load leg indicator shows red this means the load leg is in the wrong position. floor 5 . When the load leg is installed correctly, the load leg indicator will show green. Red will be shown when installed incorrectly. 5 -2
The load leg has multiple positions. When the load leg indicator shows red this means the load leg is in the wrong position. -
The completely assembled base is shown as 6
- The ISOFIX connectors must be attached and locked onto the ISOFIX anchor points. 6 -1
- The load leg must be installed correctly with green indicator. 5 -2
- Please install the enhanced child restraint on the rear vehicle seat and then put the child in the enhanced child restraint.
-
Push the enhanced child restraint down onto the base 7 . If the enhanced child restraint is secure, the enhanced child restraint indicator will show green. 8 The enhanced child restraint can ONLY be installed and released when in rearward facing mode.
-
Press the rotating button to rotate for easier side loading/unloading of the child. 9
Rotate the enhanced child restraint to the rear facing position. The enhanced child restraint indicator will show green. 10 -
To release the enhanced child restraint, first take the child out of the child restraint. Pull the child restraint release button 11 -1, then lift the child restraint up 11 -2.
-
To remove the base from the vehicle seat, push the secondary lock buttons 12 -1 first and then press the ISOFIX releasing buttons 12 -2 on the ISOFIX connectors before removing the base from the vehicle seat. 12
-
For transporting, press ISOFIX adjustment button and move the ISOFIX connectors back into the storage position. 13
Allison Baby UK Ltd,
Venture Point, Towers Business Park Rugeley, Staffordshire, WS15 1UZ
NUNA Inter national B.V.
Van der Valk Bourmanweg 178 C, 2352 JD Leiderdorp, The Netherlands
view all fine signature selections at joiebaby.com/signature