HYUNDAI WSC 2032 Wireless Weather Station and Photo Album Instruction Manual

HYUNDAI WSC 2032 Wireless Weather Station and Photo Album

Precaution

This appliance is not intended for use by persons people (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concernin g the way of use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance. The package includes

• Photo Frame Main unit.
• Infrared IR remote control.
• Remote thermo-hygrometer sensor Transmitter.
• Adapter.

Buttons on the photo frame POWER

• UP/DOWN.
• LEFT/RIGHT.
• Enter.
• Exit.

Press Functions

• Turn on or off the unit.
• Move up or down in the setup mode.
• Select photos or move left or right in the SETUP mode Enter the display mode or confirm setting in setup mode Exit the current display mode.

When display is off, press any buttons except POWER to turn on the weather display mode for around 1 minute.

Buttons on the IR remote control Press Functions

• POWER:Turn on or off the unit.
• UP/DOWN:Move up or down in the setup mode.
• LEFT/RIGHT:Select photos or move left or right in the SETUP mode.
• Enter :Enter the display mode or confirm setting in setup mode.
• Exit:Exit the current display mode
  • When display is off press any buttons except POWER to turn on the weather display mode for around 1 minute

Buttons on the IR remote control Press Functions

• POWER : Turn on or off the unit.
• PHOTOS : Enter photo mode.
• WEATHER:Enter weather mode.
• WEATHER + PHOTOS : Enter weather & photo mode.
• CALENDAR:  Enter calendar mode.
• SETUP:  Enter setup modeSLIDESHOW: Enable or disable slideshow function.
• MENU : Enter menu mode.
• ENTER : Enter the display mode or confirm setting in setup mode.
• Exit : Exit the current display mode.
• UP/DOWN :  Move up or down in the setup mode.
• LEFT/RIGHT: Select photos or move left or right in the display mode.
• ZOOM   :  Zoom in the photo.
• ROTATE:Rotate the photo.
  • When display is off, Press any buttons except POWER on the remote control to turn on display for around 1 minute.

Quick Start Guide for Initial Setup

• Pull out the insulation sheet from the IR remote control
• Connect the adapter to the photo frame and it will start searching for remote sensor for 4 minutes.
• Within this 4 minutes, open the battery door of the remote sensor and install 2 pieces of AAA batteries
• After RF remote sensor reception, the message “Start radio-controlled clock reception now? appears. Select √  using the LEFT/RIGHT button and press ENTER to confirm.
• The display will turn off automatically for around 10 minutes for reception.
• After the radio-controlled clock reception, the display will turn on. Go to SETUP display mode to set the Weather Forecast.
• Press LEFT/RIGHT to select the current weather condition between Sunny, Partly Cloudy, Cloudy, Rainy or Stormy as initial weather forecast setting. Press Enter to confirm and Exit to return to Menu mode.

INTITIAL SETUP

BATTERY & ADAPTER INSTALLATION

• Photo Frame: Main Power Source: Plug in the 5.0V adapter into the adapter socket on the right for basic ope-ration
• Remote Sensor:Loosen the screws on the battery door with a small screwdriver, insert 2 pieces of AAA batteries according to the polarity indicated. Replace the cover and tighten the screws.
• IR Remote Control:Battery (CR2025) is included in the IR remote control. For initial setup, pull out the battery insu-lation sheet from the bottom of the IR remote control.

To replace the batter, follow the instruction on the back of the IR remote control to pull out the battery door. Follow the battery polarity and replace a new CR2025 battery. Close the battery door.

INITIAL SETTING FOR THE WIRELESS THERMO HYGROMETER

Once the adapter is connected to the photo frame, it will automatically search for the remote sensor for 4 minutes.  In this 4 minute, open the battery door of the remote sensor, set Channel 1 for the first remo-te sensor. Set channel 2 and channel 3 for the 2nd and 3rd sensor. Install 2 pieces of AAA batteries into the battery compartment. Once the batteries are first installed it will transmit RF signal to the photo frame.  When RF connection is established, the respective temperature & humidity of the selected channel will appear on the weather display mode. You may also follow below procedure to set up the remote sensor. To enforce RF searching for the remote sensor on the photo frame, go to the SETUP display mode. Press Down button until Wireless Sensor Reception is highlighted. Press Left or Right to select Search Now. Press Enter to confirm and it will switch to WEATHER display mode and start searching for remote sensor. The  icon flashes indicating it is searching for remote sensor. During the RF searching, press TX button inside the battery compartment of the remote sensor to enforce transmitting signal to the receiver. When RF connection is established, the respective temperature & humidity of the selected outdoor channel will appear on the weather display mode.

RADIOCONTROLLED CLOCK SETTING

Once the photo frame is connected to the adapter and the RF remote sensor reception is completed, the unit will start synchronizing the radio controlled clock. The display of the photo fra me will be turned off during radio- controlled clock reception to avoid interference from the display panel. Select √  when the following message appears. Start radio-controlled clock reception now? Display will turn off for 10 minutes during reception. The display will turn off around 10 minutes to receive radio-controlled clock signal. If the reception is successful, antenna icon with full signal strength will appear on the wea-ther display mode next to the clock. If the icon does not appear, radio time signal is not available at the moment. Try other locations later. Place the unit away from source of interference such as mobile phones, appliances, TV etc. The photo frame also has a daily synchronizati-on at around 2:03 am & 3:03 am. To enforce searching for radio- controlled clock signal, go to Setup display mode. Press UP or DOWN to select Radio- Controlled Reception. Press LEFT  or RIGHT to select Search Now and press Enter to confirm. Then select √  when the message Start radio-controlled clock reception now? appears. The display will turn off and start the radio- controlled clock reception.
During radio-controlled clock reception, you may turn on the display by pressing any button, however, doing so will terminate the reception)

WEATHER FORECAST SETTING

To obtain an accurate weather forecast, you need to input your current weather condition as initial setting. Go to “SETUP display mode and use UP/DOWN to select Weather Forecast. Press LEFT/RIGHT to select your current weather condition between Sunny, Partly Cloudy, Cloudy, Rainy or Stormy as the initial weather forecast setting. Press [ENTER] to confirm setting and EXIT to exit the SETUP mode.The unit predicts weather condition of the next 12 – 24 hours based on the change of atmos-pheric pressure. The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly forecasted, we cannot be responsible for any loss caused by an incorrect forecast.

NOTE
Different geographical location such as inland area or coastal region has different weather forecasting response. In case your weather forecast always show the wrong weather forecast over a long period of time and does not reflect the actual weather condition, it is necessary to follow above setting procedure for fine tuning the weather forecast’s accuracy

OPERATION

There are 5 display modes in the menu selection.

Press LEFT or  RIGHT to select and ENTER to enter the selected display mode.

PHOTO MODE

Save your photos JPEG format into your memory device USB memory stick, SD or MMC card) and insert into the connector on the side of the photo frame when the unit is off. Turn on the photo frame and enter PHOTO mode to view the photos. Press LEFT / RIGHT to view the next or previous photo Press SLIDESHOW to enable or disable the slideshow.Press ZOOM IN to enlarge the photo press repeatedly to resume to the original photo size. Press ROTATE to rotate the photo To set the time interval & transition effect of the slideshow, enter the SETUP mode for setting.

WEATHER MODE

Weather forecast

Includes sunny, partly cloudy, cloudy, rainy & stormy.

 Pressure bar chart

Shows pressure level & trend of the past 6 hours.

Barometric pressure

Absolute pressure reading SETUP mode for pressure unit setting.

Pressure trend

Rising, steady or falling.

Indoor dew point in degree C or F

refer SETUP mode for temperature unit setting.

Indoor heat index in degree C or F

SETUP mode for temperature unit setting)

Indoor temperature in degree C or F

With trend  rising, steady or falling.

Indoor humidity with trend

Rising, steady or falling.

Outdoor dew point in degree C or F

SETUP mode for temperature unit setting.

Outdoor heat index in degree C or F

SETUP mode for temperature unit setting.

Outdoor humidity

With trend  rising, steady or falling.

RF signal indicator

Flashes when it is searching for RF signal from remote sensor; stays on when it has successfully received RF signal from the remote sensor.

Radio controlled clock signal

Appears when the time is synchronized with the radio controlled clock signal.

Radio controlled time

Displays in 24 or 12 hour format Time format in SETUP mode for setting.

Alarm icon

Appears when alarm is enabled.

Moon phase with stars icons

New moon the moon icon disappears, Waxing Crescent moon, First Quarter Moon, Waxing gibbous moon, Full Moon, Waning gibbous Moon, Last Quarter Moon & Waning Crescent.

Calendar

Displays in Day/Month or Month/Day format (Refer SETUP mode for setting.

Channel number of remote sensor

• Channel 1, 2 or 3
• Dew point is the temperature to which the air has to be cooled in order to get condensation.
• Heat Index combines the effects of heat and humidity.
• It is the apparent temperature of how hot the heat-humidity combination makes it feels.

WEATHER & PHOTO MODE

• Radio-controlled time displays in 24 or 12 hour format Time format in SETUP mode for setting.
•  Alarm icon appears when alarm is enabled.
• Weather forecast  includes sunny, partly cloudy, cloudy, rainy & stormy.
• Indoor temperature in degree C or F with trend rising, steady or falling.
• Outdoor temperature in degree C or F with trend rising, steady or falling.
• Outdoor humidity with trend  rising, steady or falling.
• RF signal indicator flashes when it is searching for RF signal from remote sensor; stays on when it has successfully received RF signal from the remote sensor.
• Photo.
• Radio controlled clock signal appears when the time is synchronized with the radio controlled clock signal.

CALENDAR MODE

Press LEFT / RIGHT to show the calendar of the previous or next month Press UP / DOWN to show the calendar of the previous or next year. To set the calendar, enter SETUP mode for setting

SETUP MODE

• Press UP/DOWN to move to your setting item. Press LEFT/RIGHT to select the setting and press ENTER to confirm the setting.
• Language: Select between English, Dutch & French.
• Slideshow Time: Select between 3s, 5s, 15s, 1 min, 15 min & 1 hour for photo slideshow mode.
• Transition Effect: Select the transition effect of the photo slideshow mode.
• Photo repeat mode:   Select between random, manual or repeat all for the photo slideshow mode.
• Display mode:  Select the photo display mode cinema stretch crop.
• On/Off Timer 1  On:  Adjust the first automatic power on time in HH : MM; enable or disable.
• On/Off Timer 1 Off:  Adjust the first automatic power off time in HH : MM enable or disable.
• On/Off Timer 2  On: Adjust the second automatic power on time in HH : MM enable or disable.
• On/Off Timer 2  Off: Adjust the second automatic power off time in HH : MM enable or disable.
  • For power saving you can select when to turn on or off the photo frame automatically throughout the day using the On/Off timer 1 or 2.
• Brightness: Select the brightness of the display from level 1 to 16.
• Contrast: Select the contrast of the display from level 1 to 16.
• Saturation:Select the saturation of the display from level 1 to 16.
• Radio Controlled Clock: Enable or disable the radio-controlled clock..
• Default: enable Radio Controlled Reception:Automatic  search for radio-controlled daily at around 2:03am
  • Search now  start searching for radio controlled clock signal Off –turn off the daily radio-controlled clock reception
• Time Offset: Adjust the clock to your local time using the time offset setting
• Time: Adjust the calendar and time You need to do this if your photo frame cannot receive radio controlled clock signal
• Calendar Display Format: Select between Day/Month or Month/Day format Time Format:  Select between 24 & 12 hour format
• Alarm: Adjust the alarm time and enable/disable the alarm Wireless Sensor
  • Reception:  Automatic – default RF reception mode Search now  Search for remote sensor immediately
• Temperature Unit:  Select between degree C & F for temperature, heat index & dew point
• Weather Forecast: Select between sunny, partly cloudy, cloudy, rainy & stormy.
• Pressure Unit: Select pressure unit between hPa, mmHg, inHg & mb.
• Remote Channel Display:  Automatic Show the channel being registered.
  • Channel 1 only  Shows only channel 1 reading only.
  • Channel 2 only  Shows only channel 2 reading only.
  • Channel 3 only Shows only channel 3 reading only.

TROUBLE SHOOTING

In case there is a lose contact between the power socket & adapter, the photo frame can sus-tain the power for around 1 minute with its internal backup system. After the 1 minute without power supplied from the adapter, the unit will shut off completely and the synchronization of RF remote sensor & radio- controlled clock will be lost. You are required to set up the remote sensor, radio controlled clock & weather forecast again following the procedures.After every battery replacement of the remote sensor, you are required to follow the procedure in the manual to setup the remote sensor again. The USB port on the side of the photo frame should not be used as a power source or char-ger to provide power to your USB device other than a USB flash drive. The extra power pro-vided may affect the reception & performance of the photo frame and may reset the unit. We are not responsible for any damage to the photo frame due to this reason. If your photo frame does not receive RF temperature & humidity signal from the remote sen-sor, check the battery level of the remote sensor. Replace the batteries of the remote sensor when the “ “ low battery icon appears on the sensor’s display and repeat the setup proce-dure in the manual. If it continues to fail, try to shorten the distance between the photo frame & remote sensor and repeat the setup procedure in the manual to link up the sensor. Obstacle or wall between the remote sensor & photo frame will shorten the effective reception range of the unit. Do not place the photo frame & remote sensor near metal or electrical appliances such as TV, computer or WiFi system due to the RF interference emitted from these devices. Avoid placing the remote sensor in direct sunlight as it will heat up the sensor and provide inaccurate outdoor temperature reading. In cold weather below 0ºC, the battery voltage level of the remote sensor will drop and the overall transmission range will reduce and this is nor-mal. Shorten the distance between the sensor & the photo frame. For extreme low outdoor temperature below 0ºC, you are advised to use lithium AAA battery on the remote sensor as normal alkaline battery may freeze at extreme low temperature. If your photo frame cannot receive radio-controlled clock, try other time at night when there is less RF interference from the surroundings. Do not place the photo frame near metal or electrical appliances such as TV, computer or WiFi system due to the RF interference emitted from these devices. You may try to place the photo frame closer to the window where there is usually a stronger radio-controlled clock signal. Try different location & orientation for best reception. Follow the procedure in the manual to search for the radio-controlled clock signal again. If your weather forecast reading does not reflect the actual weather condition for a long peri-od of time, you are required to adjust the weather forecast setting in the SETUP mode.If the IR remote control does not function even at a short distance in front of the photo frame, the battery inside the IR remote control may be flat. Replace a new CR2025 battery following the battery polarity indicated on the back of the IR remote control.

BATTERY DISPOSAL

Replace only with the same or equivalent type recommended by the manufacturer. Please disposal of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation.

SPECIFICATIONS

• Memory:  Supports USB flash drive (up to 32GB), SD & MMC cards up to 32GB.
• Photo format: Supports Jpeg format.
• Indoor Temperature/ Heat Index/ Dew Point: 0ºC to + 50ºC (+32ºF to +122ºF) (Shows LL when below 0ºC or 32ºF shows HH when above 50ºC or 122ºF.
• Outdoor Temperature/ Heat Index/ Dew Point: -20ºC to +60ºC (-4ºF to +140ºF) (Shows LL when below -20ºC or -4ºF shows HH when above 60ºC or 140ºF.
• In/Out Humidity: 20% – 99% RH
• Channel:  Maximum 3 remote sensors
• Transmission: up to 30M in open area, RF 869,78MHz.
• Clock: DCF77 Radio-Controlled, Quartz back-up
• Power:  5.0V adapter for photo frame AAA x 2 pcs for remote sensor.
  • CR2025 x 1 pc for IR remote control
• Weight (NETTO): 445g.

We reserve the right to change technical specifications.

WARNING
Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don’t use it or before a revision. There aren’t any parts in this appliance which are reparable by consumer. Always appeal to a qualified authorized service. The product is under a dangerous tention.

Liquidation of old electrical and electronic devices
This appearing on the product, on the product accessories or on the pro- duct packing means that the product must not be disposed as household waste. When the product/ battery durability is over, please, deliver the product or battery if it is enclosed to the respective collection point, where the electrical appliances or batteries will be recycled. The places, where the used electrical appliances are collected, exist in the European Union and in other European countries as well. By proper disposal of the product you can prevent possible negative impact on environment and human health, which might otherwise occur as a consequence of improper mani-pulation with the product or battery/ accumulator. Recycling of materials contributes to protecti-on of natural resources. Therefore, please, do not throw the old electrical appliances and batteries/ accumulators in the household waste. Information, where it is possible to leave the old electrical appliances for free, is provided at your local authority, at the store where you have bought the product. Information, where you can leave the batteries and accumulators for free, is provided to you at the store, at your local authority.

CE DECLARATION OF CONFORMITY

• Company Identification No 499 73 053 hereby declares that the hereinafter described product.
• Radio controlled weather station with wireless data transmission, Photoframe and adapter type Hyundai WSC 2032.
• Purpose of use: signal transmission from the transmitting device to the receiving device in the Czech Republic and in the EU member states, used frequency 869.78 MHz, which corresponds to the band 869.7 to 870 MHz is in conformance with the provisions of the GD No. 426/2000 Coll. that is in conformity with the R&TTE Directive 1999/5/EC concerning radio and telecommunication devices.
• The following technical regulations have been applied in assessing the conformance Harmonised standards
  • ETSI EN 300 220-1 v 2.1.1 (2006-04)
  • ETSI EN 300 220-2 v 2.1.2 (2007-06
  • ETSI EN 301 489-1 v 1.8.1 (2008)
  • ETSI EN 301 489-3 v 1.4.1 (2002-08)
  • EN 55022, EN 55024
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 61000-6-3
  • EN 61000-6-1
  • EN 60950-1
• The test results are provided in the Test Reports No. 086-529917-000, No. 60/760.9.247.01, No. 60/760.9.249.01, No. 60.100.9.723.01 Rev.00 and No.. 60/760.9.248.01, issued by the TUV SUD Hong Kong Ltd., Hong Kong.
• The conformity has been assessed according to the Annex No. 3 to GD No. 426/2000 Coll.
• We declare that the product complies with the basic requirements of the above-mentioned GD, i.e. the user safety and health protection, electromagnetic compatibility and effective utilisation of the spectrum.
• Declaration issuance date and venue: 30.11.2009 Authorised person’s stamp.

References

• Hyundai-electronics.cz
• ASEKOL
• Úvod - ECOBAT
• Hyundai Electronics– Hyundai CZ
• SEWA - OZV | elektroodpad | batérie | obaly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>