ROUGH COUNTRY 921930810 Polaris 2019-21 Ranger Rear Cube Mount Instruction Manual
- June 3, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 921930810 Polaris 2019-21 Ranger Rear Cube Mount
POLARIS 2019-21 Ranger Rear Cube Mount
Thank you for choosing Rough Country for all your vehicle needs.
Please read instructions before beginning installation. Check the kit hardware
against the kit contents shown below. Be sure you have all needed parts and
know where they go.
If question exist, please call us
@1-800-222-7023. We will be happy to
answer any questions concerning this product. Check all fasteners for proper
torque. Check to ensure for adequate clearance between all components.
Periodically check all hardware for tightness.
Kit Content:
- Driver Light
- Mounting
- Bracket x1 Pass
- Light Mounting Bracket x1
Tools Needed:
- 3/16 Allen Wrench
Hardware Included:
- 5/16-18×1 Button
- Head Bolt x4 6MM Flat
- Washer x4
- Flag Nut x2
Torque Specs:
- Size Grade 5 Grade 8 Size Class 8.8 Class 10.9
- 5/16” 15 ft/lbs 20ft/lbs 6MM 5ft/lbs 9ft/lbs
- 3/8” 30 ft/lbs 35ft/lbs 8MM 18ft/lbs 23ft/lbs
- 7/16” 45 ft/lbs 60ft/lbs 10MM 32ft/lbs 45ft/lbs
- 1/2” 65 ft/lbs 90ft/lbs 12MM 55ft/lbs 75ft/lbs
- 9/16” 95 ft/lbs 130ft/lbs 14MM 85ft/lbs 120ft/lbs
- 5/8” 135ft/lbs 175ft/lbs 16MM 130ft/lbs 165ft/lbs
- 3/4” 185ft/lbs 280ft/lbs 18MM 170ft/lbs 240ft/lbs
INSTALLATION INSTRUCTONS
-
Remove the stock bolt holding the door-net. See Photo 1.
-
Insert the supplied flag nut behind the door-net mounting holes. See Photo 2.
-
Install the cube light mounting bracket using the supplied 5/16-18×1 button head bolts. Tighten using a 3/16” Allen wrench. See Photo 3. The door net can be reinstalled.
-
Install the cube like using the hardware supplied with the light. See Photo 4.
-
Refer to the instructions that came with the light to wire it to the vehicle.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>