mictrack MT600 4G GPS Tracker User Manual

MT600 4G GPS Tracker
User Manual V3.0

Preface
Congratulations on choosing the MT600 4G Vehicle GPS tracker. This manual shows how to easily program and set up the tracker for the best results. Make sure to read this manual carefully before using this product, so as to avoid delays or confusion with its operation. Please note that specifications and instructions are subject to change without notice to facilitate product improvement. Updates and changes will be integrated into the latest release. The manufacturer assumes no responsibility for any errors or omissions  in outdated documents

Overview

The MT600 is the latest technology 4G GPS tracker, fully supporting 4G LTE mobile networks. This device can be used to locate, track and monitor any remote target via SMS,  PC Computer, or Mobile APP. It is commonly used to track and locate individual vehicles, motorbikes, or boats, and is a valuable tool for enhanced fleet management. The user also can remotely cut off Fuel / Ignition and check the historical route traveled and other vehicle data.
The MT600 has an excellent track record for stable performance and possesses a wide variety of features

Application

• 4G LTE network support (fallback to 3G/2G network)
• Real-time tracking
• Vehicle trip history and mileage data on the web server
• SOS alarm reporting (optional)
•  ACC switch status report
•  Geo-Fence alarm and reporting
•  External power cut off the alarm
•  Remote cut off fuel / ignition (optional)
•  Vehicle towing / Movement alarm
•  Over-Speed alarm and reporting
•  Backup battery low power alarm
• Power saving/sleep mode
•  Compatible with most third-party platform
•  Open protocol

Specifications

B1/B3/B7/B8/B20/B28A
3G WCDMA: 900/2100MHz
2G: 900/1800MHz
MT600-A (US/CA/Mexico) 4G LTE: B2/B4/B12
3G WCDMA: 850/1700/1900MHz
MT600-AU (Australia/New Zealand)
4G LTE: B1/B2/B3/B4/B5/B7/B8/B28/B40
3G WCDMA: 850/900/1900/2100MHz
2G:850/900/1800/1900MMz
SIM Interface| Standard Size SIM

MT600 and Accessories

Optional accessories:

Unit Diagram

Installation

6.1 SIM Card installation

1. Get ready with a Standard size SIM Card with 10-15MB of data a month.
2. Insert the SIM card into the SIM card plastic tray.
3. Ensure the SIM card has metal contacts facing up (Diagram #1).
4. Gently slide the SIM Tray into the SIM Slot (Diagram #2).

Note:

• The device only supports Standard Size SIM cards;
• To remove the SIM card, use a paperclip to press the SIM card pop-out button to eject the SIM card tray.
• Make sure to insert the sim card first and then connect the external 12V power.

6.2 LED Indications
6.2.1 CHG-Charge indicator (RED)

( Note: LED will not light if backup battery is not low power.)

6.2.2 SYS-System indicator (BLUE)

6.2.3 GPS-GPS indicator (GREEN)

6.3 Device Button Instruction

• Insert the SIM tray to POWER ON the unit; Take out SIM tray to
POWER OFF the unit
• Connect the external power to POWER ON; Disconnect the
power to POWER OFF

---|---

6.4 Install 4G & GPS Antenna

• Connect the 4G Antenna firmly to the “3G/4G” Socket
• Connect the GPS Antenna firmly to the “GPS” socket

6.5 Connection of supplied wiring loom

When installing the device, please connect supplied wiring loom as follows: (or contact us for help)

• Red: Connect to constant 12V Car Battery(+)
• Black: Connect to Earth (Chassis) Car battery(-)
• Green: Connect to ACC switched 12V Power
• Yellow: Connect to the red wire of supplied SOS switch
• White: Connect to Relay terminal (85)
• Pink: Connect to Relay terminal (86)

Note: Relay is optional for remote fuel/ignition shut-off.

6.6 Install the SOS switch (optional)

• Red: connect to Yellow wire from the supplied wiring loom
• Black: connect to Earth (Chassis) Car battery(-)

Note: installation Video: https://bit.ly/mt600-install

Setup and Configuration

Note: When sending SMS command to the unit, do NOT use spaces or symbols not listed below. [brackets and + are for instructional use only] * and # are valid command  parameters.

Setting Authorized Mobile Phone Numbers
SMS Command format: mobile number+password+[command parameter] Note: Command Parameter here is the sequence of the mobile number i.e. [1=Admin] or [2=SOS call number] For example: 134243923300000*1
Unit Reply: SET USER NUMBER 1 OK.
Note:**

• The defaulted password is 0000.
• It can authorize up to 3 phone numbers.

Deleting authorized number
SMS Command format: password+number+[command parameter] Note: Command Parameter here is the sequence of the mobile number
i.e. [1=Admin] or [2=SOS call number] For example: *00001**
Unit Reply: DELETE USER NUMBER 1 OK.

Changing the Admin password
SMS Command format: 777+new password+old password
For example 77712340000
Unit Reply: SET USER PASSWORD OK.

Instant Location Request (used to receive unit location via SMS)
SMS Command format: 666+password
For example 6660000
When sent, this command will result in a Unit Reply SMS as follows:
ID:865662000409210
Date:05:36:59 11/11/2016
Fix: A State: SMS
http://maps.google.com/maps?q=+22.63146%2c+114.03701
Note: This link can to be opened on any Smart Phone to reveal the Google Maps Location of the unit at the time of the request

SOS Alarm (optional)
When the SOS button is pressed for 3 seconds, the unit will automatically send its location to the authorized phone number via SMS, and also upload location data to the Web Tracking Platform server along with the status description “SOS”

Round Geo-fence (Setting of size and shape of Geo-Fence)
SMS Command format: 005+password+R+[Command Parameter] Note: Command Parameter here is fence diameter in KM [0.1~999.9] For example: 0050000R1.0
Unit Reply: SET ROUND GEO-FENCE: ON

Enable the Round Geo-fence
SMS Command format: 211+password
For example 2110000
Unit Reply: SET ROUND GEO-FENCE: ON.

Disable the Round Geo-fence
SMS Command format: 210+password
For example 2100000
Unit Reply: SET ROUND GEO-FENCE: OFF.

Remote cut-off fuel and ignition (optional)
To remotely Cut-Off fuel or power
SMS Command format: 940+password
For example 9400000
Unit Reply: SET OILWAY DISCONNECT.
To remotely Resume fuel or power SMS Command format: 941+password
For example 9410000
Unit Reply: SET OILWAY RECOVERY CONNECT.
Note: The default setting for the Cut-Off feature is OFF

External power cut-off alarm
If the external power to the unit is disconnected, [i.e. unit tampering or vehicle battery removal] the unit will call the authorized phone numbers, and then send location data to the authorized phone number and upload location data to the Web Tracking Platform server along with the status description “DEF”

Towing alarm
If the vehicle was being moved or towed when ACC is turned OFF, it will SMS location data to the authorized phone number, and upload location data to the Web Tracking
Platform server along with the status description “TOWED”

Low battery Alarm (internal backup battery)
When the unit’s internal backup battery is low, it will SMS the authorized phone number, and upload location data to the Web Tracking Platform server along with the status  description “BLP”

Over-Speed alarm (Alerts that the unit is exceeding a preset speed)
SMS Command format: #122#user password#[Command Parameter]##
Note: Command Parameter here is [Km/Hour] Example: #122#0000#100##
Unit Reply: SET SPEED LIMIT:ON
To disable the Over-Speed Alarm
SMS Command format: #122#0000#0##
Note: Command Parameter here is [0=OFF] Unit Reply: SET SPEED LIMIT:OFF.
Note: Speed is in KM/H, Maximum setting = [999].

Set time zone
SMS Command format: 896+password+ [+/-]HH:MM
Note: Command Parameter here is [Plus or Minus GMT]&[Hours/Minutes] For example: 8960000+10:00
Reply: SET TIME ZONE:+08:00
Note: The default is Greenwich Time (UTC). [i.e. Melbourne Australia = +10:00]

Set APN (Access Point Name)
SMS Command format 1: #803#password#APN##
For example : #803#0000#telstra.internet##
SMS Command format 2: #803#password#APN#APN user name#APN password##
For example: #803#0000#CMNET#INTERNET#INTERNET##
Reply: SET GPRS APN OK.
Note: Please CALL your SIM Card provider to get the correct APN info.

Set Tracking Server IP and PORT
SMS Command format: #804#password#IP address(or domain) #port##
Example:#804#0000#112.95.164.248#7700##
Reply: SET SERVER IP AND PORT OK.

Set GPRS Upload Interval Time
This sets how often [in seconds] the unit sends location data back to the Tracking
Platform whilst the ACC is switched on. This will affect accuracy and data usage.

ACC ON (Upload default status is AUTO)
SMS Command format: #805#password#interval time#[command parameter]##
Note: Command Parameter here [1=ON] & [0=OFF] For example:#805#0000#10#1##
Unit Reply: SET GPS PERIODIC UPLOAD ON.
Note: interval time maximum [10,65535]seconds
Unit Reply: SET GPS PERIODIC UPLOAD OFF.

Vehicle Towed Alarm (vehicle moves whilst ACC is turned OFF)
SMS Command format: #809#password#interval time#[command parameter]##
Note: Command Parameter here [1=ON] & [0=OFF] For example:#809#0000#10#1##
Unit Reply: SET GPS TOWED UPLOAD ON.
Note: interval time maximum [10,65535]seconds
Unit Reply: SET GPS TOWED UPLOAD OFF.

ACC OFF & Vehicle Stationary (Upload status is AUTO LOW)
[Periodic upload of vehicle status to the Web Tracking Platform server whilst ACC off
– variable to save SIM data costs when parked for long periods and Power Saving] SMS Command format: #807#password#interval time##
For example: #807#0000#2##
Unit Reply: SET GPS POWER SAVING UPLOAD ON.
Note: interval time maximum [2,1440] minutes [If interval time = 0, it will stop upload] Unit Reply: SET GPS POWER SAVING UPLOAD OFF.

SMS Response ON/OFF
To turn SMS messages OFF
SMS Command format: 160+password
For example 1600000
Unit Reply: SET SEND SMS: OFF.
To turn SMS messages back ON
SMS Command format: 161+password
For example 1610000
Unit Reply: SET SEND SMS: ON.
Note: if you want to disable the SMS alerts, send 1600000

Unit Phone Calling Control (useful for SIM Card data cost saving)
To turn OFF unit Calling Alerts (i.e. to save SIM data costs)
SMS Command format: 150+password
For example 1500000
Unit Reply: SET VOICE CALL: OFF
To turn ON unit Calling Alerts
SMS Command format: 151+password
For example 1510000
Unit Reply: SET VOICE CALL: ON\
Note: if you want to disable the call alerts, send 1500000

App & PC Tracking platform

Active the device ID number

• Contact your sales or distributor
• If not please subscribe to the server plan from the official online shop: https://www.mictrack.com/shop/gps-tracking-platform-service

App install & Login

• Search “Yi tracker” in Google Play or iOS store(or scan the following QR code) to download the Mobile APP(not Yi tracker2);
  http://vents.ua/

• Choose the” Login by Device No., Input server www.trackits.com

• Input your device’s ID number and password(default is 123456) to log in.
  

PC login

• Web: www.trackits.com, Choose “ID No.”
• Input your device’s ID number and password(default is 123456) to log in
• Watch the video: https://bit.ly/trackis
  

Troubleshooting

Send SMS to the
device but no rep| 1>SIM Card has no active
2>Card balance is not enough| Please check the SIM card status and try again.
The text command format is wrong| Please check the command format again
Connect network fail.| Please check the LED status and make sure the network connects successfully first.
GPS platform shows
logged off| | 1. Check the APN setting ;
2. Check IP and port
3. Check the network if matches
GPS platform shows no location or the coast of Africa.| Device indoor/garage| Take it outside for a
10-minute walk or drive, and its location should update.
LED no light| The backup battery is low power| Please charge the device for 30 minutes at least.

Add: 706, United Building, Donghuan 1st Road, Longhua District, Shenzhen, China 518109
Tel: +86-755-28198746
Web: www.mictrack.com
Email: info@mictrack.com 

References

• Ultra Low Power Asset Tracking Device Manufacturer
• YouTube
• YouTube
• Manual-Hub.com – Free PDF manuals!
• How to Use Mictrack Server - Mictrack

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>