global sources AB0307 Wireless Charger and Reading Lamp User Manual
- June 6, 2024
- global sources
Table of Contents
wireless charger &reading lamp
User Manual
It is recommended to read this user manual carefully and keep it for future reference.
Product Overview
- Charging area
- Led light
- Switch button
- Instruction sheet
Specifications
Type-c Input: 5V 2A，9V 2A
Wireless Output: 5V 1A, 9V 1.1A,
Rated Power: 10W
432842 ITEM: 25031
MODEL: AB0307
Operation:
- Connect the cable to a Type-C port.
- Put your Qi-compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
- When the wireless charger is working correctly a white light will turn on.
- Tapping the switch button will turn on the light. Holding the switch button lets you toggle between different brightness settings. Tapping again will turn off the light.
Note: If your phone has a protective case you may need to remove it for a successful connection when using the wireless charger.
Warnings:
- Do not expose this product to rain or damp conditions.
- Prevent this ítem from falling as it could cause serious damage.
- Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
- In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire.
- Clean it with a dry cloth.
- Do not place this ítem near sources of heat or expose to direct sunlight.
- Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
- To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process.
- Do not use mobile devices with a metal case.
- Keep out of reach of children.
The distance between user and products should be no less than 20cm
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation This device has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by
turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>