Mictrack MT532 4G GPS Tracker User Manual

Mictrack MT532 4G GPS Tracker

Preface

Congratulations on choosing the Mictrack MT532 4G GPS tracker. This manual shows how to easily program and setup the tracker for best results. Make sure to read this manual carefully before using this product, so as to avoid delays or confusion with it’s operation. Please note that specifications and instructions are subject to change without notice to facilitate product improvement. Updates and changes will be integrated into the latest release. The manufacturer assumes no responsibility for any errors or omissions in outdated documents.

Overview

The MT532 is the 4G GPS tracker, supporting 4G L TE/2G GSM networks. This device can be used locate, track and monitor any remote target via SMS, PC Computer or Mobile APP. It is commonly used to track and locate individual vehicles, motorbikes or boats, and is a valuable tool for enhanced fleet management. The user can check the historical route travelled and other vehicle data.

The MT532 has an excellent track record for stable performance and possesses a wide variety of features.

Application

• 4G LTE network with 2G Fallback
• Real-time tracking
• ACC switch status alarm (Ignition ON/OFF)
• External power cut off alarm
• Remote cut off fuel/ ignition (optional)
• Vehicle towing / Movement alarm
• Over-Speed alarm and reporting
• Backup battery low power alarm
• Power saving / sleep mode
• Data backup when Network is unavailable
• Open Protocol

Specifications

4G LTE: B1/B3/B5/B7 /B8/B20
2G: 90011800MHz MT532-A
** 4G LTE: B1/B2/B3/B4/B5/B7/B8/B28/B66 2G:850/900/1800/1900MHz

Installation

SIM Card installation

• Get ready a Standard size SIM Card with 10-15MB data a month.
• Open the back cover
• Insert Micro Sim card (3FF) to sim card slot correctly
• Make the Power Button to ON
• After that the device will be ready.

Power ON

Make the Power button to ON, and the device will turn on.

Note:

• The device only supports Micro Size SIM card (3FF).

LED Indications

1. Blue LED – GPS indicator
   Status| Description
   ---|---
   Flash| GPS Not Work or No GPS Signal
   Light On| GPS Work
2. Red LED – Charging indicator
   Status| Description
   ---|---
   Flash| Charging/working
   Light Off
   ON| No Power
   Normal
3. Yellow LED – Network indicator
   Status| Description
   ---|---
   Light On| Network work
   Flash| No network or SIM card not detected

Install the Device

• Wiring connections (See below image)
• Connect the Relay (relay is optional)

The Yellow cable is control the fuel of the car and connects pin 86 of relay which is a coil end. Pin 85 of the relay which is another coil end connects fuel channel to supply 12V power (please note working volt of the relay is consistent with working volt of the product). Pin 30 and Pin 87a are always closed ends and connect fuel channel power circuit in series. Please install wire in a correct way. supplier will not be responsible for device damage caused by wrong installation.

When installing the device, please connect supplied wiring loom as follows: (or contact our sales team for help)

• Red : Connect to constant 12V Car Battery(+)
• Black: Connect to Earth (Chassis) Car battery (-)
• Orange : Connect to ACC switched 12V Power
• Yellow : Connect the relay

Note: SOS and Relay are optional.

Setup and Configuration

Following a successful command, you should always receive a reply SMS from the unit.
Be patient, as this may take some time depending if the unit is required to reboot to process the command. Failure to reply will indicate either an incorrect SMS Command, or the unit has powered off, lost Cell Mobile signal or run out of SIM Card credit.

Setting Authorized Mobile Phone Numbers

Command: 101#phone number#
Example: 101#13424392330#
Reply: ok
Note: The defaulted password is 123456.

Change the password

Command: password, old password, new password
Example: password, 123456,000000
Reply: password OK

Request the single position

Command: G1234
When sent this command to device, it will reply the location by using Google Link.
http://maps.google.com/maps?q=+22.64812,+114.03426
ID:19175213870
ACC:ON
GPS:A
Speed:0.00KM/H
23-05-10 19:18:39

Over-Speed alarm

Command : speed, password, speed value
Example: speed, 123456,080
Reply: speed ok

Disable Over-Speed Alarm
Command : speed,password,000
Command: speed,123456,000
Reply: speed ok
Note: Speed range is [0,255] KM/H

Phone Alarm for shake

Disable phone alarm for shake: 121#
Reply: OK
Enable phone alarm for shake: 122#
Reply: OK

SMS Alarm for shake
Disable SMS alarm for shake: 126#
Reply: OK
Enable SMS alarm for shake: 125#
Reply: OK

Set APN (Access Point Name)

Command: APN, password, apn
Example: apn, 123456,cmnet
Unit Reply: apn ok.
Note: please contact your SIM Card provider to get the correct APN details

Sleep interval

Command: sleep, password, interval
Example: sleep, 123456,5
Unit Reply: OK.
Note: The interval range is [1, 1440] minutes.

Set Server IP and PORT

Command : IP+ space+ IP address+ space+ port number
Example: IP 113.98.254.180 8185
Reply: SET IP OK.

Set time zone

Command : zone, password, Time zone
Example: zone, 123456,E08
Reply: OK.

SOS Alarm

When press the SOS button more than 3 seconds, it will send location to authorized phone number, the information state included “STATE: SOS”

Sleep mode

When the vehicle ignition is off and devices stop for 3 minutes it will go to sleep mode.

Cut Off Oil Alarm

While the 12V power disconnected, it will send location to server

Heartbeat report interval

Command for set heartbeat time: interval, password, X
Example: interval, 123456,600
Reply: OK
Note: .the unit of X is L second, the max time is [1,65532] seconds

ACC Illegal Start Alarm

Enable ACC Illegal SMS Alarm: accsms, password, 1
Example: accsms, 123456, 1
Reply: ace sms alarm set ok

Disable ACC Illegal SMS Alarm: accsms, password,0
Example: accsms, 123456,0
Reply: ace sms alarm set ok

Enable ACC Illegal Phone Alarm: acccall, password, 1
Example: acccall, 123456, 1,
Reply: ace call alarm set ok

Disable ACC Illegal Phone Alarm: acccall,password,0
Example: acc123456,0
Reply: ace call alarm set ok
Note: 1 mean open, 2 mean close

Reboot

Command: CQ
Reply: system reset ok!

Reset

Command : FORMAT
Reply: OK

ACC ON Upload time

Command : FREQ, password, X
Example : FREQ, 123456,30
Reply: OK
Note: The range is [1 ,65535] seconds

ACC OFF Upload time

Command : STATIC, password, X
Example: STATIC,123456,40
Reply: OK
Note: The range is [1,65535] seconds

Any questions please do not hesitate to contact us:

Customers Support

Shenzhen Mictrack Electronics Co.,Ltd.
mictrack
Add: 706, United Building, Dongguan P1 Road, Long-haul District, Shenzhen, China 518109
Tel: +86-755-281987 46
Web: www.mictrack.com
Email: info@mictrack.com
http://www.mictrack.com

References

• Ultra Low Power Asset Tracking Device Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>