auna 10006335 Active Concept 620 Home Cinema Speaker User Manual
- June 16, 2024
- Auna
Table of Contents
auna 10006335 Active Concept 620 Home Cinema Speaker
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10006335 |
---|---|
Power supply | 220-240 V ~ 50/60 Hz |
BT frequency | 2402-2480 MHz |
BT radio-frequency power (max.) | 3.31 dBm |
Frequency Response | 40 Hz-20 kHz |
S/N Ratio | ≥75 dB |
Separation | ≥50 dB |
Speaker | 6.5“+3“x5 |
SAFETY INSTRUCTIONS
General information
-
Lightning – If you are not going to use the device for a long time or if there is a storm, disconnect the plug from the electrical outlet and disconnect the device from the antenna connector. This will avoid damage to the product that may be caused by lightning or overvoltage.
-
Overload – Do not overload power outlets, extension cords, or built-in power outlets, as this may result in a fire or electric shock.
-
Foreign objects and liquid – Never push objects of any kind through openings in the device as they may touch dangerous voltage points or short out parts, which could result in a fire or electric shock. Never spill liquids of any kind on the device.
-
Repairs and maintenance – Do not attempt to service this product yourself, as opening or removing covers will expose you to dangerous voltages or other hazards. Leave all maintenance to qualified service personnel.
-
Damage requiring service – Disconnect the power plug from the outlet and consult a qualified specialist if any of the following conditions occur:
a) If the power cord or plug is damaged.
b) If liquid has been spilled or objects have fallen onto the product.
c) If the product has been exposed to rain or water.
d) If the product has been dropped or damaged.
e) If the product has a markedly reduced performance. -
Replacement parts – When replacement parts are required, make sure that the service professional who replaces the parts only uses replacement parts that have been approved by the manufacturer or that have the same characteristics as the original part. Unauthorized replacement may result in fire, electric shock or other hazards.
-
Heat – Do not place the unit near heat sources such as radiators, heaters, stoves or other products (including amplifiers).
Note: This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.
FRONT PANEL
- INPUT SET: when pressing the button, the function is „input“ function.
- MASTER VOLUME: when rotating the button, the function os Volume+/ Volume- function.
- PRO-LOGIC: pro-logic function key.
- AUTO/ : USB/SD pause/play function key.
- VOL-/ /CH-: „previous“ will be „volume-“ function if you keep pressing it more than 3 seconds. Previous song when USB/SD input;
- VOL+/ /CH+: „next“ will be „volume+“ function if you keep pressing it more than 3 seconds. Next song when USB/SD input;.
- SD/MMC CARD: SD card socket
- U DISK: USB socket
Note: When using SD card function, it is required to choose SD card whose memory is more than 512 MB and also is legal edition.
CONTROL PANEL
| On/off switch (standby)
---|---
SD
| SD playback
PRO
| Pro-Logic channel selection
USB
| USB memory
AUX
| AUX playback
DVD
| DVD playback
BLUE
| BT playback
| Play/Pause
| USB/SD: Previous track
| USB/SD: Next track
SLEEP +/-
| Sleep timer
FL +/-
| Volume front left
FR +/-
| Volume front right
SW +/-
| Subwoofer volume
CEN +/-
| Center volume
VOL +/-
| Total volume
SL +/-
| Volume surround left
SR +/-
| Volume surround right
0-9
| Number keys – direct title selection
REPEAT
| Repeat
RESET
| Reset, press this button with maximum volume and power on
EQ +/-
| Equalizer adjustment (USB/SD)
DISP +/-
| Brightness adjustment
CONNECTION DIAGRAM 1
Speaker Terminals
Connect front speakers, a center speaker, surround speakers to 5.1 speaker output terminals.
- The front speaker‘s cords to the FRONT SPEAKERS terminals
- The center speaker‘s cord to the CENTER SPEAKERS terminals.
- The surround speaker‘s cords to SURROUND SPEAKER terminals.
Note: Do not leave objects generating magnetism near the speakers.
CONNECTION DIAGRAM 2
Connection of accessories
Connect the accessories according to the colours: Red plugs and connectors:
Left audio channel.
Note: Connect the connectors properly. Loose connections can cause buzzing and other noise. Important: Connect all accessories and only then connect the device to the mains.
POSITIONING THE SPEAKERS
(a) Subwoofer: Place the subwoofer any place on the floor. There is no
directional requirement for the Bass effect.
(b) Front speakers
(c) Surround Speakers: Place the surround spacers in the same level
slightly behind the listening area by facing it. Align horizontally about 1
metre above ear high.
(d) Center Speaker: Place at the center of the two front speakers. If
connecting at TV set to the unit, place on or below the TV set.
CLEANING AND CARE
- Use a soft cloth or cotton dipped in a neutral solution for cleaning the surface of the speaker. Do not use the type of cloth that you use for washing dishes or aggressive chemical agents.
- If the speaker is not working properly during a storm, please disconnect the plug from the power socket and reinsert it after a minute.
- Do not drop small items or a liquid into the speaker.
- In the event that you find small items or a liquid inside the speaker ,you see smoke or smell an odour, immediately disconnect the speaker from the power grid .send the speaker to an authorised service centre.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.
DECLARATION OF CONFORMITY
Manufacturer:
Chal-Tec GmbH, Wall strasse 16, 10179 Berlin,
Germany.
Importer for Great
Britain:
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type Concept 620 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: use. berlin/10006335
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Concept 620 is in compliance with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use. berlin/10006335
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>