WyreStorm 4K UHD and 1080p HD Ultra-Wide Angle USB Webcam with Integrated Microphone User Guide
- June 5, 2024
- WyreStorm
Table of Contents
- WyreStorm 4K UHD and 1080p HD Ultra-Wide Angle USB Webcam with Integrated
- Setting up the Webcam
- FOR PLACEMENT ON A TRIPOD
- Tripod not included CONNECTING THE WEBCAM
- SUCCESSFUL CONNECTION
- CAMERA SOFTWARE ONLY APPLICABLE FOR FOCUS 200/210 MODELS
- Software Device Setup
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WyreStorm 4K UHD and 1080p HD Ultra-Wide Angle USB Webcam with Integrated
Microphone
Setting up the Webcam
FOR PLACEMENT ON A MONITOR
Place your webcam on a computer, laptop or monitor at a position or angle you desire.
Adjust the webcam to make sure the foot on the universal mounting clip is flush with the back of your device. Manually adjust the webcam up/down to the best position to frame yourself.
FOR PLACEMENT ON A TRIPOD
Locate the M12 tripod thread on the bottom of 1 the webcam.
2. Secure the webcam on your tripod by twisting it into the M12 thread.
Place your webcam with the tripod anywhere you desire to the best position to frame yourself.
Tripod not included CONNECTING THE WEBCAM
Plug the webcam into an available USB port on your computer
SUCCESSFUL CONNECTION
The LED activity light will light when the webcam is in use by an application.
For the best video quality on FOCUS 200/210, it is recommended to use a USB 3.0 connection.
Note
The FOCUS Webcam must be installed at a height no greater than 2m/6.5ft.
CAMERA SOFTWARE ONLY APPLICABLE FOR FOCUS 200/210 MODELS
The Focus 200/210 has its own control software that can be used to control ePTZ and other functions. To download the most up to date version of this software, visit wyrestorm.com
Software Device Setup
Connecting To Zoom
To connect the WyreStorm Focus Webcam to your Zoom software, first navigate to your settings pane which can be found by clicking the gear icon in the top right hand corner, then click on the Video tab. Here you can change the camera device by using the dropdown menus. Select WyreStorm Focus Webcam under the applicable options.
Connecting To Microsoft Teams
To connect the WyreStorm Focus Webcam to your Microsoft Teams software, first navigate to your settings pane which can be found by clicking on your display image in the top right hand corner, then click on the devices tab. Here you can change the camera device by using the dropdown menus. Select WyreStorm Focus Webcam under the applicable options.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>