HYUNDAI HS 903 Hair Straightener Instruction Manual

: June 5, 2024
: HYUNDAI

Table of Contents

SAFETY WARNING
DESCRIPTION OF THE APPLIANCE
INSTRUCTIONS FOR USE
MAINTENANCE
TECHNICAL DATA
LEGISLATIVE & ECOLOGY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HYUNDAI HS 903 Hair Straightener

HYUNDAI-HS-903-Hair-Straightener-product

Dear customer , thank you for purchasing our product. Keep these instructions including the warranty, the receipt, and, if possible, the box with the internal packing.

SAFETY WARNING

Before the first use, read the instructions for use carefully, look at the picture and store the instructions for use for the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
Check whether the data on the type label corresponds with the voltage in your socket.
The power cord plug has to be connected to the properly connected and grounded socket according.
Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell to water. In this case take the appliance to a special service to check its safety and proper function.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
The hair straightener must not be immersed into water or other liquids and it must not be used close to bathtubs, showers, washbasins, or other water containers, including a swimming pool. If the straightener still falls into the water, do not take it out! First of all unplug the power cord from the socket and only then take out the hair straightener. In this case take the appliance to a special service to check its safety and proper function.
If the hair straightener is used in a bathroom, it has to be disconnected from the electric power by unplugging the power cord from the socket because there is a risk close to water even if the hair straightener is off.
For additional protection, we recommend the installation of current protection (RCD) with the nominal release current not exceeding 30 mm. Ask a control technician or an electrician for advice.
If the power cord of the appliance is corrupted, it has to be replaced by the producer, its service technician or a similarly qualified person so as to prevent dangerous situations.
Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
Before replacing accessories or accessible parts, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
The appliance is intended for use in households only and for similar use! It is not designed for use in hair salons or for other commercial use!
Do not insert or take the plug out of a socket with wet hands and do not pull the power cord!
Do not let the appliance in operation without supervision!
Do not put the hair straightener on hot heat sources (e.g. oven, stove, radiator).
No part of the appliance can get in contact with places sensitive to heat (e.g. eyes, ears, neck).
Take care when handling the appliance, try to prevent injury (e.g. burns). The heating plates are hot!
Any modification of the appliance surface (e.g. by means of self-adhesive wallpaper, foil etc.) is prohibited!
When the appliance is switched on for the first time, short and slight smoke can come out that does not mean any defect and it is not a reason for claiming a defect of the appliance.
Do not put the appliance into bodily holes.
If the hair straightener is stored at lower temperatures, first of all let its temperature adapt to the environment and thus you will maintain the firmness of the plastic parts.
The hair straightener must not be used for styling wigs, hairpieces, or artificial hair.
A hair straightener can be used for styling natural, colored or bleached hair. But do not use it for styling hair that is treated with chemical substances (e.g. hairspray, styling agent, etc.), the temperature effect could be reduced due to sticking of chemical substances on the plates.
Also, do not put the hair straightener on soft and easily flammable surfaces (e.g. bed, towels, sheets, carpets); they could be damaged by hot parts of the appliance.
When handling the hair straightener, protect the power cord from contact with the hot surface of the plates or other sources of heat.
Switch off the hair straighteners right after its use, unplug them from power supply and let
it cool down. Then put it on a safe dry place, out of reach of children.
Check the condition of the power cord of the appliance regularly.
Do not wind the power cord around the appliance; this will extend life of the power cord.
The power cord must not be damaged with sharp or hot objects, or open fire, it must not be sunk into water or bent over sharp edges.
If you need to use an extension cord, it has to be uncorrupted and it has to comply with the valid standards.
Never use the appliance for any other purpose than for that described in these instructions for use!
The manufacturer is not responsible for damage caused by improper handling of the appliance (e.g. fire, burning, hair damage, etc.) and its guarantee does not cover the appliance in the case of failure to comply with the safety warnings above.

DESCRIPTION OF THE APPLIANCE

A-hair straightener

A1 – I/O button
A2 – control light
A3 – heating plates
A4 – Iron´s end
A5 – turning joint of the power cord
A6 – power cord
A7 – slider control of jaw lock

INSTRUCTIONS FOR USE

Remove all the packing material and take out the hair straightener. Put the hair straightener on a suitable even surface (see par. I. SAFETY WARNING). Plug power cord connector A6 to an electric socket. Switch on the hair straightener by pressing the A1 button to the I position. Control light A2 will turn red and the tongs start to heat to the preset temperature (about 180 °C). Then the temperature will be kept automatically. Switch off the appliance after use by pushing the A1 button to 0 positions (control light A2 will go out) and let it cool down before putting it.

Hair straightening
Use the hair straightener for washed and dried or slightly damp hair, never for wet hair. Before using the hair straightener, comb the hair so that it is not disheveled. Start with styling the lower hair first. When styling hair, do not put locks of hair that are too thick between the plates. Divide a lock in about 5 cm of its width and put it into an open hair straightener. Then close the hair straightener by pushing and moving it slowly on the lock from the roots towards the hair tips. You can curl the tips thanks to the round edges of the plates upwards or downwards. Repeat the process till you have created the required hairstyle. Let the hair cool down before the final styling.
Lock
The lock is used for safe and effective storing of the straightener in the closed position.

Locking – close the straightener by pushing control A7 to the position.
Unlocking – push the closed straightener control A7 to the position.

MAINTENANCE

Turn off the appliance before any maintenance, disconnect it from the power supply by unplugging the power cord from the electric socket, and let it cool down! Do not use rough and aggressive detergents! Treat the surface with a wet and soft cloth. Put the cooled straightener in a safe and dry place, out of reach of children and incapacitated persons.
Expert service must do the large maintenance or intervene in inside parts of the appliance! Non-observance of the instructions of the manufacturer cancels the right to guarantee repair!

TECHNICAL DATA

Hair straightener
Input 35 W
Ceramic coating surface (25 x 90 mm)
Fast warm up of ironing plates (about 30 sec)
Temperature: max 180 oC
Lockable iron plates
PTC heating elements
Light operating signalization
Practical shape and design
ON / OFF switch
Rotary power cord
Power cord length 1,7 m
Size 4 x 21 x 2,5 cm
Weight 0,25 kg

LEGISLATIVE & ECOLOGY

The product has received ES declaration of conformity according to Act as amended. The product matches the requirements of the below statutory order as amended.

Committee Regulation No. 2006/95/ES as amended, setting the technical requirements of the electrical appliance as low.
Committee Regulation No. 2004/108/ES as amended, setting the technical requirements of products in terms of their electromagnetic compatibility.

The manufacturer reserves the right to make insignificant changes to the standard design that do not affect the function.

WARNING: Do not use this product near water, or in wet areas to avoid fire or injury
of electric current. Always turn off the product when you don’t use it or before a revision. There aren’t any parts in this appliance that are reparable by consumers. Always appeal to a qualified authorized service. The product is under dangerous tension.

Old electrical appliances used batteries and accumulators disposal

This symbol appears on the product, on the product accessories, or on the product packing means that the product must not be disposed of as household waste. When the product/ battery durability is over, please, deliver the product or battery (if it is enclosed) to the respective collection point, where the electrical appliances or batteries will be recycled. The places, where the used electrical appliances are collected, exist in the European Union and in other European countries as well. By proper disposal of the product, you can prevent possible negative impacts on the environment and human health, which might otherwise occur as a consequence of improper manipulation with the product or battery/ accumulator. Recycling of materials contributes to the protection of natural resources. Therefore, please, do not throw the old electrical appliances and batteries/ accumulators in the household waste. Information, about where it is possible to leave the old electrical appliances for free, is provided at your local authority, at the store where you have bought the product. Information, on where you can leave the batteries and accumulators for free, is provided to you at the store, at your local authority. Do not use the appliance close to bathtubs, showers, bath basins, or other water containers.