RYDEEN BSS-ONE Single Sensor Blind Spot Detection System Owner’s Manual
- June 5, 2024
- RYDEEN
Table of Contents
- Welcome Statement & Warnings
- What’s in the Box
- Product Overview
- Installation
- Function Introduction
- SYSTEM FUNCTION
- Specifications
- Technical Support Contact Info
- One Year Limited Warranty
- To Obtain Warranty Service
- FCC/ISED Compliance Statement
- Copyright
- Disclaimer
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Owner’s Manual
BSS-ONE
Single Sensor Blind Spot Detection System
V1.0
Welcome Statement & Warnings
Congratulations and thank you for purchasing RYDEEN BSS-ONE, Single Sensor Blind Spot Detection System. We hope you will enjoy using this exciting product and trust that it will make your driving experience more comfortable and hassle-free. Please read this Owner’s Manual carefully. After you have finished reading the instructions, keep this document in a safe place for future reference. If you have any further questions about your BSS-ONE operation, feel free to call RYDEEN, Toll Free at 1-877-777-8811 (within USA only) for product support, or visit our website: www.rydeenmobile.com
PRECAUTIONS & WARNINGS
IMPORTANT INFORMATION
PLEASE READ THIS MANUAL CAREFULLY BEFORE
USING THE PRODUCT
The BSS-ONE is designed to aid in detecting vehicles that may have entered the vehicle blind spot zone, and will provide you with a safer, more comfortable and convenient driving experience. Therefore, we recommend that you read and follow all the information and instructions in this user manual to make your BSS-ONE achieve the best performance and satisfaction.
-
THE BSS-ONE ONLY WORKS ON VEHICLES WITH PLASTIC BUMPERS. IT WILL NOT FUNCTION/WORK ON BUMPERS MADE OF METAL OR OTHER COMPOSITE MATERIALS LIKE FIBERGLASS OR CARBON FIBER.
-
The BSS-ONE IS NOT TO replace any functions drivers shall ordinarily perform in driving a motor vehicle, nor does it decrease the need for drivers to stay vigilant and alert in all driving conditions, to obey all the safe driving standards, practices, traffic rules and regulations. ALWAYS LOOK AHEAD, LOOK AROUND, KEEP A SAFE DISTANCE FROM OTHER VEHICLES WHEN DRIVING AND PARKING, DO NOT DEPEND SOLELY ON THE PRODUCT FOR COMPLETE FIELD OF VIEW.
-
RYDEEN DOES NOT GUARANTEE 100% ACCURACY IN THE DETECTION OF VEHICLES OR PEDESTRIANS, AND THEREFORE DOES NOT GUARANTEE THE PERFORMANCE OF ANY RELATED AUDIO OR VISUAL WARNING SIGNALS. FURTHERMORE, ROAD, WEATHER AND OTHER CONDITIONS MAY ADVERSELY AFFECT THE VEHICLE’S BLIND SPOT DETECTION SYSTEM RECOGNITION AND RESPONSE CAPABILITIES.
-
Position the unit (LED Indicators) in a location that does not obstruct the driver’s view of the road, instruments or vehicle controls.
-
Make sure that the BSS-ONE device and the provided bracket or adhesive are properly attached to the vehicle’s bumper.
-
DO NOT attempt to modify or disassemble the BSS-ONE unit. Personal injury or damage could result. If a problem occurs, stop using the system immediately and contact RYDEEN. Changes or modifications to the BSS-ONE will void the warranty and its compliance with FCC rules.
-
If you notice any of the following: (Unidentified liquid on the unit; smoke rising out of the unit; unusual odor emanating from the unit) STOP USING THE UNIT IMMEDIATELY. Contact the nearest RYDEEN retailer or call RYDEEN Customer Service for assistance Toll Free @ 1-877-777-8811 (within USA only).
-
DO NOT mount your BSS-ONE on any non-automotive form of transportation (motorcycles, bikes, ATV’s, watercraft).
-
The appearance of the product shown in this manual may be different from the actual product, please refer to the actual product.
-
The picture examples used in this manual may be different compared to the actual vehicle, please use as reference.
-
DO NOT DROP ANY COMPONENTS OF THIS PRODUCT. Excessive shock due to dropping any components in the system or subjecting it to excessive shock and vibrations may cause malfunction and is not covered by warranty.
-
Keep the BSS-ONE unit out of reach of small children.
-
DO NOT disassemble or modify this product, as there are high-voltage components inside that may cause an electric shock. Be sure to consult your dealer or the nearest authorized RYDEEN service agent for internal inspection, adjustments or repairs.
-
This product cannot guarantee to avoid all incidents.
-
THE FOLLOWING INSTRUCTIONS ARE RECOMMENDED FOR AUTHORIZED RYDEEN MOBILE INSTALLERS.
What’s in the Box
When opening the packaging box of this product, please make sure that all product accessories are complete.
Product Overview
Wiring Diagram
Installation
- THE FOLLOWING INSTRUCTIONS ARE INTENDED TO GIVE YOU A BRIEF GUIDANCE FOR INSTALLATION. CAREFULLY READ THIS INSTALLATION GUIDE AND ITS IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS PRIOR TO INSTALLING OR USING THE BSD SYSTEM.
- THE BSS-ONE ONLY WORKS ON VEHICLES WITH PLASTIC BUMPERS. IT WILL NOT FUNCTION/WORK ON BUMPERS MADE OF METAL OR OTHER COMPOSITE MATERIALS LIKE FIBERGLASS OR CARBON FIBER.
- For professional installation only by personnel with specialized training and experience in mobile electronics.
- Dropping your BSS-ONE unit or subjecting it to excessive shock and vibrations as this may cause it to malfunction and is not covered by warranty.
- Do not install the LED Indicators where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons, or (iii) impair the driver’s ability to safely operate the vehicle.
- Never install this product in front of or next to the place in the dashboard, door, or pillar from which one of your vehicle’s airbags would deploy. Please refer to the vehicle’s owner’s manual for reference to the deployment area of the airbags.
- Secure all wiring with cable clamps or electrical tape. Do not allow any bare wiring to remain exposed.
- Make sure that the cables and wires will not interfere with or become caught in any of the vehicle’s moving parts, especially brake, doors, or any of the vehicle’s controls.
- If the wiring of this unit is located under a front seat, make sure it does not obstruct seat movement. Route all leads and cords carefully around the sliding mechanism so they do not get caught or pinched in the mechanism and cause a short circuit.
- Do not shorten any leads. If you do, the protection circuit (fuse holder, fuse resistor or filter, etc.) may fail to work properly.
- Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
- Never feed power to other electronic products by cutting the insulation of the power supply lead of this product and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.
- Use this unit with a 12-volt operated vehicle and negative grounding only. Failure to do so may result in a fire or malfunction.
- Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring.
- Do not perform installation in rain or fog.
NOTE:
- Ensure that the connector is inserted correctly according to the corresponding label and the arrow marks of the wire connector at the connection point. When connecting, ensure that the KEY or raised area of the connector mates with the opposite connector. Do not force any connection and ensure that the connector mates properly.
- To avoid any damage to the connectors, align the arrows on each of the corresponding items, then firmly press connectors together to ensure a good connection. Failure to properly install and connect the system components may cause damage to the product and operation of the system.
- The radar sensor should be kept in a position with low interference, otherwise it may cause the detection to be insensitive or not work properly.
- The radar sensor should be kept clean. The adhesion of ice, snow or mud will affect the normal operation of the sensor.
Installation Diagram
Inside view
Step 1
Measure the rear bumper to locate a suitable mounting point, align the radar
sensor from the centerline of the vehicle, and along this axis, locate a
position parallel to the ground 15.5 inches to 31 inches from the ground so
that the sensor is mounted inside the bumper. Mark this spot on the outside of
the bumper with painter’s tape.
Step 2
Using the allen key (large) provided. Adjust the angle of sensor to -8 degree
as shown right in the diagram.
Step 3
Remove the bumper cover and clean the inside of the cover where the sensor is
to be placed. The area should be cleaned with alcohol so that the adhesive pad
on the sensor assembly may be securely attached. Make sure the attaching
surface is smooth, so the adhesive can contact the surface well. If the
surface is rough, use sanding paper to make the surface smooth. Clean and
remove sanding particles. Affix the sensor to the bumper cover taking note of
the direction, orientation, and designated location.
PRIMER MUST BE USED
Step 4
Connect the radar sensor to the harness. Route the harness assembly from the
rear exterior of the vehicle into the cabin utilizing a grommet. Secure the
harness away from any heat sources and moving parts. Pass the harness through
the grommet ensuring the harness and connector do not become damaged. Route
the harness to the desired location and affix it to the vehicle using cable
ties.
Step 5
Instructions for A. indicator, B. buzzer.
A. Select locations for the right & left indicators to be installed (lower
part of A pillars are recommended for the best visibility), check for
clearance behind the panel. Mark the locations to be drilled with the provided
tool. Drill holes. Snap into place.
B. Locate a suitable buzzer installation location for the best audible effect.
Affix the buzzer using the adhesive patch or wire ties.
NOTE: For customers utilizing BSS-MI or TOMBO 360 LED indicators instead of provided LED indicators for A-pillars, please contact RYDEEN Technical Support at tech1@rydeenmobile.com or call 310-787-7880, toll-free 877-777-8811 for installation instructions.
Step 6
Connect each unit according to the wiring diagram (page 5). Red – Ignition/ACC
controlled 12V+ source. Black – Ground (-) Polarity (Connect to car chassis or
ground point).
Step 7
Test the system’s operation, ensuring that all features operate according to
this manual. After operation is tested, finalize connections and secure wires.
Function Introduction
System Activation
- Start vehicle.
- Indicator lamps will illuminate for 3 seconds and beep to confirm activation and run self-diagnostics.
- The Blind Spot Detection System will activate when you start the engine and engage while driving above speeds approximately 13mph (20km/h).
Blind Spot Indicator Lamps
-
The left indicator will illuminate when a vehicle is in your left blind spot while driving.
This indicator will flash and an audible tone will sound when your left turn signal is activated while there is a vehicle in the left blind spot. -
The right indicator will illuminate when a vehicle is in your right blind spot while driving. This indicator will flash and an audible tone will sound when your right turn signal is activated while there is a vehicle in the right blind spot. The BSS-ONE is designed to aid in detecting vehicles that may have entered the vehicle blind spot zone, which will provide you with a more safe and convenient driving experience.
BLIND SPOT DETECTION (BSD)
When your vehicle speed exceeds 13mph (20km/h), BSD starts detection, and the detection area is the left and right rear of the car. When a vehicle is approaching, the LED indicator on the side of the oncoming car will light up to warn the driver. If your vehicle, has it’s turn signal activated, and there is an oncoming car approaching, it will enter level II warning, LED flashing & buzzer warning sound to alert the driver.
Level| Warning Way| Detection Zone| Target|
Conditions
---|---|---|---|---
Level I| LED On (Constant)| Vertical: 1.6-23 feet (0.5-7m) from radar
Horizontal: 5 feet-14.8 feet (1m-4.50m)| Dynamic
vehicle| Overtaken: Vehicle Speed: a. 13mph (20 km/h)
Overtake: Vehicle Speed: a. 15mph (25 km/h)
Level II| LED Flash & Buzzer On| Vertical: 1.6-23 feet (0.5-7m) from radar
Horizontal: 5 feet-14.8 feet (lm 4.50m)| Dynamic
vehicle| Overtaken: Vehicle Speed: a. 13mph (20 km/h)
Overtake: Vehicle Speed: a. 15mph (25 km/h)
Turn signal ON
Relative Velocity: > 0.6 ~ <13mph (>1 ~ 20km/h) (Overtaken)
Overtake: The target vehicle enters the BSD warning area >2s
LANE CHANGE ALERT (LCA)
When the vehicle speed exceeds 13mph (20km/h), and TTC < 2s, the system starts detection. The detection area is the left and right rear of the car. When a vehicle is approaching from behind, the LED on the side of the oncoming car will light up to warn the driver. When the turn signal is activated and the driver prepares to change lanes, if there is an oncoming car behind, the warning light on the side of the oncoming car will continue to flash and give an audible warning. (Level II)
Level| Warning Way| Detection Zone| Target|
Conditions
---|---|---|---|---
Level I| LED On (Constant)| Vertical: 1.6feet-98.4feet (0.5m 30m) from radar
Horizontal: 5 feet-14.8 feet (1m-4.50m)| Dynamic
vehicle| Vehicle Speed: a 13mph (20 km/h) TTC<2s
Level II| LED Flash & Buzzer On| Vertical: 1.6feet-98.4 feet (0.5m 30m) from
radar Horizontal: 5 feet-14.8 feet (1m-4.50m)| Dynamic
vehicle| Vehicle Speed: a 13mph (20 km/h)
Turn signal ON TTC<2s
Relative Velocity: > 13 ~ <25mph (>20 ~ 40km/h)
NOTE:
Under certain driving scenarios, the BSS-ONE may detect objects in an
unintended way. The following conditions below are examples of scenarios where
fault notifications may occur.
SYSTEM FUNCTION
No. | Mode | Buzzer(890Hz) | Indicator |
---|---|---|---|
1 | System Turn ON (ACC ON) | Long beep | LED ON for 3 seconds |
2 | Level I Alert | None | LED ON when system in Level I situation |
3 | Level II Alert | Short Beep | |
(On 330ms, Off 330ms) | LED Flash when system in Level II situation (On 330ms, |
Off 330ms)
Specifications
Basic Parameters
Operational Temperature| -40°C ~ +85t
Storage Temperature| -40°C ~ +85″C
Operation Speed| ≥13 mph 20 km/h)
Installation Angle| – 8 degrees (+/- 3)
System Function| BSD, LCA
Standard| ISO 16750
Radiation Regulation| FCC / ISED
Alarm Level| Level I : LED On (Constant)
Level II: LED Flash & Buzzer On
Hardware Parameters
Input Voltage Range| 12V (9V – 16V)
Power supply| IGN Terminal (12V)
Current Consumption| 500mA @ 12V, 6W(max)
Buzzer Alarm| 890Hz
FUSE Rating Value| 5A
Radar Sensor Parameters
Water Proof| IPX6/IPX7
FOV| Horizontal: 100°(+/-10°)
Radiation Regulations| FCC / ISED
Frequency| 77GHz
Technical Support Contact Info
If you have other questions about the BSS-ONE , please contact your
retailer or Te chnical Support:
Te lephone: 1-877-777-8811 (within USA
only) or 1-310-787-7880
Email: tech1@rydeenmobile.com
Web Address: www.rydeenmobile.com
One Year Limited Warranty
RYDEEN MOBILE (a manufacturer of “RYDEEN” products) warrants product (BSS-ONE) only to the original purchaser as described following:
Warranty Period
Rydeen warrants this product for a period of one (1) year from the original
purchase date.
Warranty Coverage
This warranty covers all defects in material and workmanship except as
specified below.
- Any products distributed outside of the USA by Rydeen North America, Inc. (Rydeen) or which is not purchased in the USA or Canada unless the product is purchased through the USA Military Exchange Service.
- Any product(s) which are purchased from an unauthorized retailer (in store or online).
- Any products in which the serial number label or the model number label are removed, torn, modified or replicated.
- Any damage defects or malfunctions resulting from any of following:
a) When defect occurs during shipment of product (freight carrier’s responsibility).
b) Installation or removal of product.
c) Accidents, act of nature, misuse, abuse, neglect, unauthorized product modification, or failure to follow product owner’s manual instructions.
d) Any repair or attempt to repair without RYDEEN authorization.
e) Any other cause which is not related to product defect.
f) Any cosmetic damages due to normal wear and tear. g) Any consumable items (such as fuse or batteries).
If any problems develop with your Rydeen products during or after the Limited
Warranty Period, or if you have any questions regarding the operation or installation of the product, you should contact your Rydeen retailer. If the problem or your question is not handled to your satisfaction, please contact Rydeen Customer Service Department at 1-877-777-8811 (within the USA only) Monday-Friday between 9:00 AM to 4:00 PM Pacific Standard Time or visit www.Rydeenmobile.com.
To Obtain Warranty Service
If warranty service is required for your Rydeen product:
- Please call Rydeen Customer Service Department at 1-877-777-8811 (within the USA only), MondayFriday between 9:00 AM to 4:00 PM Pacific Standard time and obtain a Return Authorization Number (“RA”) Number.
- Please pay for any shipping charge to Rydeen Customer Service Department. Rydeen will pay the return shipping charge, if the repair or service was performed during the warranty period. Rydeen will ship freight collect (recipient is responsible for shipping charge) if Rydeen determine the service was performed outside of warranty period or exclusions described above. Rydeen will not accept warranty service requests from outside of the U.S.A. even if product was purchased in the USA.
- Please include a copy of your original purchase receipt including Rydeen product model number, purchase date, retailer name/address and a RA Number whenever your product is sent for warranty service.
- Rydeen will pay for all labor and material expenses for covered product during warranty period.
- Shipping address for Rydeen Customer Service Department is following: Rydeen North America, Inc. (a manufacturer of Rydeen products), 2701 Plaza Del Amo, Unit 705, Torrance, Cal ifornia 90503, USA.
FCC/ISED Compliance Statement
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Copyright interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body.
ISED Statement:
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- this device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Copyright
Intellectual Property Rights of Software are proprietary to RYDEEN North America, Inc. or its suppliers and are subject to copyright and other intellectual property laws. Client’s only rights with respect to any RYDEEN North America, Inc. software included with the products shall be provided, under the terms of RYDEEN North America, Inc. software license. The title to all RYDEEN North America, Inc. Software remains with RYDEEN North America, Inc. Client agrees that RYDEEN North America, Inc. retains ownership of all rights, title and interest in all intellectual property, works of authorship, trade secrets and the like in all aspects of the Product(s). Client and its affiliates and subcontractors agree not to reverse engineer any aspect of the Software and/or Products supplied under this agreement and further agree to pay assessed damages should such action take place.
Disclaimer
The information in this owner’s manual is for general guidance. The images in the manual may be similar to the images shown in the actual product, but they do not exactly match. For all products sold, under the strict conditions of use and installation, we are only responsible for the after-sales of the product itself (the purchased product) (repair or replacement when Rydeen confirms that it is a quality problem). Rydeen is not responsible for other losses and injuries, please kindly note.
Troubleshooting
NO. | Issues | Reasons | Solutions |
---|---|---|---|
1 | The system does not respond after starting the engine | Incorrect connection | |
or control unit failure | Confirm that the IGN, wiring, fuse, and controller |
are connected.
2| The indicator does not light up| Damaged indicator| Replace the indicator.
Disconnected indicator| Check the harness and make sure connection is correct.
3| The buzzer makes no sound| Damaged buzzer| Replace the buzzer.
Disconnected buzzer| Check the harness and make sure connection is correct.
4| No Level I alert| Vehicle speed is less than 13 mph| Normal operation.
Bad connection from wire harness| Please contact the dealer.
Reconnect the wire harness.
5| No Level II alert| Turn signal leads not connected| Confirm turn signal
leads are connected.
6| FUSE is blown| Over current / Power surge| Exchange FUSE (5 A)
7| Blind area object detection not consistent or unstable| Not Installed in
center| Find the location and in the center of vehicle.
Installed with wrong angle| Find the correct installation angle of vehicle.
Rydeen North America, Inc.
2701 Plaza Del Amo, Suite 705, Torrance, California 90503 USA
Phone: 1-877-777-8811 Fax:
1-310-943-3778
Copyright © 2022 Rydeen North America, Inc. All Rights Reserved.
RYDEEN ® is a registered trademark of Rydeen North America, Inc.
These materials are protected by copyright law and international treaties. Any unauthorized use, reproduction, or distribution of these materials, or any portion herein, will result in severe civil and criminal penalties and fines. Violators will be prosecuted to the fullest extent of the law.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>