Tombo 360X User Guide: Install & Operate Your Surround View Mirror
- June 3, 2024
- RYDEEN
Table of Contents
The RYDEEN Tombo 360X 360 Surround View Frameless Rearview Mirror is an innovative device that provides drivers with a complete view of their surroundings while on the road. To ensure that users can properly install and operate the Tombo 360X, RYDEEN has provided a comprehensive user guide. This guide includes step-by-step instructions for mounting the mirror, routing the GPS antenna, and connecting the power adaptor. Additionally, the guide includes detailed information on how to operate the device’s touchscreen interface, including how to access settings and adjust viewing modes. Users are also provided with important information on how to use the power button, as well as technical support contact information should they have any questions or concerns. For those who require more detailed instructions, RYDEEN encourages users to visit their website for additional resources. With the Tombo 360X User Guide, drivers can feel confident in their ability to properly install and operate this cutting-edge rearview mirror.
RYDEEN Tombo 360X 360 Surround View Frameless Rearview Mirror
Included Items
Getting Started
- Mount the 360 VIEW onto the mirror using provided Velcro straps Paste the adhesive provided in the position as shown in the picture below.
- Route GPS antenna and Plug power adaptor into the cigarette lighter. *Reverse Trigger: Connect only if using the optional CM-AHD1 backup camera. Touchscreen Operation
- Main User interface
- Settings
Note:- To enter Settings, you must stop recording.
- When selecting “PiP Off” option, Reverse mode is disabled.
- When selecting “PiP ON” option, double-click on the image in the lower right corner to display the backup camera in full screen mode. Slide the screen up or down to adjust the viewing angle of the rear camera. Double-tap the touch screen to exit full-screen mode and return back to the main screen.
- These settings (Rear Cam Image, PiP On, PiP Off) only apply when using the optional CM-AHD1 backup camera.
- Modes
Note:- In wide mode, the front camera should be facing forward to give you a super wide viewing angle. Viewing angle adjustment is not available within this mode.
- Dash camera defaults back to original view setting (Cigarette Lighter Power Cable).
- Dash camera will memorize last view setting when using optional (PWH-037) power cable. Power Button Operation
- Short press to (turn On/Off) the LCD Monitor. Long press to Power On/Off. Note: For vehicles in which the cigarette lighter retains power when the key is Off. Please refer to Pg.23 of the Owner’s Manual. Technical Support Contact Info
- For any questions about 360 VIEW, please contact your retailer or RYDEEN Technical Support:
- Phone: 1-877-777-8811 (within USA only) or 1-310-787-7880
- Email: tech1@rydeenmobile.com
- Web: https://rydeenmobile.com/contact-support/
SPECIFICATIONS
| Product Name | RYDEEN Tombo 360X 360 Surround View Frameless Rearview Mirror |
|---|---|
| Included Items | – Velcro straps – Adhesive |
| Installation | – Mount mirror using provided Velcro straps – Route GPS antenna |
– Plug power adaptor into cigarette lighter – Connect reverse trigger
(optional)
Touchscreen Operation| – Main user interface – Settings – Modes
Note| – Must stop recording to enter settings – PiP Off disables reverse mode
– PiP On displays backup camera in full screen mode – Rear Cam Image, PiP On,
PiP Off only apply when using optional backup camera – Wide mode requires
front camera to face forward – Dash camera defaults back to original view
setting with cigarette lighter power cable – Dash camera memorizes last view
setting with optional power cable
Power Button Operation| – Short press to turn LCD Monitor on/off – Long press
to power on/off
Technical Support Contact Info| – Phone:
1-877-777-8811 (within USA only) or
1-310-787-7880 – Email:
tech1@rydeenmobile.com – Web:
https://rydeenmobile.com/contact-support/
Additional Resources| Visit www.rydeenmobile.com/manual-catalog-
downloads/ for more
detailed instructions
FAQ’S
What is the Tombo 360X 360 Surround View Frameless Rearview Mirror?
The Tombo 360X is an innovative device that provides drivers with a complete view of their surroundings while on the road.
What is included in the package?
The package includes the Tombo 360X 360 Surround View Frameless Rearview Mirror, Velcro straps, adhesive, GPS antenna, and power adaptor.
How do I mount the mirror?
Mount the 360 VIEW onto the mirror using provided Velcro straps and paste the adhesive provided in the position as shown in the picture in the user guide.
How do I route GPS antenna and plug power adaptor?
Route GPS antenna and plug power adaptor into the cigarette lighter.
How do I access settings?
To enter Settings, you must stop recording.
How do I adjust viewing modes?
Slide the screen up or down to adjust the viewing angle of the rear camera. Double-tap the touch screen to exit full-screen mode and return back to the main screen.
What is the Power Button Operation?
Short press to (turn On/Off) the LCD Monitor. Long press to Power On/Off.
How can I contact technical support?
For any questions about 360 VIEW, please contact your retailer or RYDEEN Technical Support by phone at 1-877-777-8811 (within USA only) or 1-310-787-7880, by email at tech1@rydeenmobile.com, or by visiting their website at https://rydeenmobile.com/contact-support/.
Where can I find more detailed instructions?
For more detailed instructions, please visit the RYDEEN website at www.rydeenmobile.com/manual-catalog-downloads/.
For more detail instructions, please visit our website at www.rydeenmobile.com/manual-catalog-downloads/