RYDEEN CM-R1000P-W Truck Camera Owner’s Manual
- May 15, 2024
- RYDEEN
Table of Contents
RYDEEN CM-R1000P-W Truck Camera
Specifications
- Image Device: 1/3 Color CMOS
- TV System: NTSC
- Effective Pixels: 976*592
- Waterproof: IP68
- Sync. System: Yes
- Resolution: 630 TV Lines
- Minimum Illumination: 0.1 Lux (day), 0 Lux (with IR)
- Microphone: Built-in microphone
Lens Angle:
- Video Output: 1.0 vp-p, 75 Ohm
- IR Light: 18 lights
- AGC: Auto
- S/N Ratio: +48 dB
- White Balance: Auto
- Electronic Shutter: Auto
- BLC: Auto
- Current Consumption: Day: 50 mA, Night: 180mA
- Power Supply: DC 12V/24V
- Operating Temperature: -40-+85 (-40 ~ 185)
- Lens: f=2.5mm, F=2.0
- Backlight Compensation: Yes
- Parking line: Parking line ON/OFF Selectable (Default: parking line off)
- Image: Mirror/ Standard Image Selectable (Default: mirror image)
Product Features
- Waterproof: IP68 approved
- Night vision distance: approx. 3~100m (18 IR lights)
- Day / Night sensor for automatic adjustment
- Wider viewing angle up to 120 degrees
Precautions
- Be cautious when mounting the camera and wiring near the fuel tank.
- The device is designed to work with a +12 / +24 volt DC power supply.
Assembly
- Camera (undetachable): 1pc
- Sunshield for camera: 1pc
- U-bracket for camera: 1pc
Assembly parts for U-bracket:
- Washer (stainless steel): 6pcs
- Spacer (stainless steel): 2pcs
Screws:
- *PM2.58 screw (stainless steel):** 6pcs
- *PA316 screw (stainless steel):** 2pcs
Installation
- Find an appropriate location for installation (Illustration 1).
- Drill holes according to the size of the U-bracket as shown in Illustration 3 and fix the U-bracket with PA3*16 screws and spacers as shown in Illustration 2.
- Drill a 20mm hole next to the U-bracket (Illustration 2). (4) Fix the camera to the U-bracket (Illustration 4).
FAQ:
Q: How do I adjust the parking lines on the camera?
- A: The parking lines can be turned on or off by connecting or disconnecting the green loop jumper wire. By default, the parking lines are off when the green loop is connected.
Q: Can the camera be used for front installation?
- A: Yes, you can set up the camera for front installation by disconnecting the white loop jumper wire.
Specifications:|
---|---
Image Device:| 1/3” Color CMOS
TV System:| NTSC
Effective Pixels:| 976*592
Waterproof:| IP68
Sync. System:| Yes
Resolution:| 630 TV Lines
Minimum Illumination:| 0.1 Lux (day), 0 Lux (with IR)
Microphone:| Built-in microphone
Lens Angle:| 120°
Video Output:| 1.0 vp-p,75 Ohm
IR Light:| 18 lights
AGC:| Auto
S/N Ratio:| +48 dB
White Balance:| Auto
Electronic Shutter:| Auto
BLC:| Auto
Current Consumption:| Day:50 mA, Night:180mA
Power Supply:| DC 12V/24V
Operating Temperature:| -40-+85℃(-40℉ ~ 185℉)
Lens:| f=2.5mm, F=2.0
Backlight Compensation:| Yes
Parking line:| Parking line ON/OFF Selectable(Default: parking line off)
Image:| Mirror/ Standard Image Selectable(Default: mirror image)
Product Features
- Waterproof: IP68 approved
- Nightvision distance: approx. 3~100m (18 IR lights)
- Day / Night sensor for automatic adjustment
- Wider viewing angle up to 120 degrees
Precautions
- Be cautious when mounting the camera and wiring near the fuel tank.
- The device is designed to work with a +12 / +24 volt DC power supply.
Assembly
CAMERA
- Camera (undetachable)
- Sunshield for camera *1pc
- U-bracket for camera *1pc
- Assembly parts for U-bracket *1pc
- Washer (stainless steel)6pcs and Spacer (stainless steel)2pcs
- PM2.58 screw(stainless steel)6pcs and PA316 (stainless steel)2pcs
Installation
- Find an appropriate location for installation (Illustration 1).
- Drill holes according to the size of the U-bracket as in illustration 3 and fix the U-bracket with PA3*16 of screws and spacer as in illustration 2.
- Drill a Φ20mm hole next to the U-bracket (Illustration 2).
- Fix the camera to the U-bracket (illustration 4).
- Connect the camera tail and the extension cable inside the car (Illustration 5).
- Note: Jumper wires:
- Green loop connected: Parking line off (Default).
- Green loop disconnected: Parking line on.
- White loop connected: For rear installation (Default).
- White loop disconnected: For front installation.
- Loosen the screw between the camera and the fixed U-bracket and adjust the camera to the best viewing angle (Illustration 6).
