RYDEEN M7000P 7 Inch Stand Alone Backup Monitor Owner’s Manual
- May 15, 2024
- RYDEEN
Table of Contents
Owner’s Manual
M7000P
Stand-Alone Backup Monitor (7-inch)
M7000P 7 Inch Stand Alone Backup Monitor
Remote Control| Metal Bracket
(Included)
---|---
Windshield Mount Option
(VSM Mount sold separately)| Wing Stand with 3M Adhesive
(Included)
WARNINGS
-
PROFESSIONAL INSTALLATION REQUIRED.
THE FOLLOWING INSTRUCTIONS ARE INTENDED FOR RYDEEN PROFESSIONAL. -
DAMAGE FROM IMPROPER INSTALLATION WILL VOID THE WARRANTY.
-
DROPPING YOUR M7000P UNIT OR SUBJECTING IT TO EXCESSIVE SHOCK AND VIBRATIONS AS THIS MAY CAUSE IT TO MALFUNCTION AND IS NOT COVERED BY WARRANTY.
-
THE M7000P UNIT IS NOT WATERPROOF. AVOID EXPOSING IT TO RAIN OR OTHER FORMS OF EXCESSIVE MOISTURE. WATER DAMAGE IS NOT COVERED UNDER THE WARRANTY.
Specification
Model | M7000P |
---|---|
Screen Size | 7-inch LCD (Digital Panel TFT) |
Resolution | 800 X 480 Pixels |
Display Aspect | 4:3 & 16:9 |
Color | RGB |
Video System | NTSC/PAL |
Brightness | 400LUX |
Video Input | 2 Sources Input (Aux input 1, Back-Up Camera Input 2) |
Current Consumption | MAX: 300mA (DC12V) |
Power Consumption | MAX: 4W |
Voltage Input | DC 9 — 16V |
Operation Temperature | -10°C to +66C (14°F to 149°F) |
Storage Temperature | -30° C to +80° C (-22°F to 176°F) |
Wiring Diagram
- Black: Ground
- Red: ACC(Car key power)+9~16V DC
- Green: Trigger Cam 2(Reverse light power positive +9~16V DC)
Monitor Mount Positions
The monitor has a specialized mounting system which allows for multiple
mounting options.
Most popular are Dash Board Mounting (figure 1) and Windshield Mounting
(figure 2).
Note: Follow local laws when mounting monitor as these may be specific
regulations in your area limiting placement.
Main Functions
- The M7OOOP is a 7-Inch rearview monitoring system for medium size vehicles (minivans, vans etc…).
- When AUX video source is connected to V1 then turn video source ON and it will automatically show the image on screen.
- Shift vehicle into reverse, the camera image will appear on the screen when V2 is properly connected to a camera.
- The monitor displays the rear blind spot to make your drive safe and secure.
- Shift vehicle out of reverse and the camera image will disappear and go back to its previous stage.
Button Operations
(0) IR
(1) POWER — Turn ON and OFF.
(2) Increase button — For adjusting of Volume, Brightness, Contrast, Language,
Rotation, etc.
(3) Decrease button — For adjusting of Volume, Brightness, Contrast, Language,
Rotation, etc.
(4) CH — Switches between all cameras Connected to Monitor.
(5) MENU —Access Brightness, Contrast, Language, Rotation, etc.
(6) SEL – mode selection
Remote control
- POWER: Turn ON and OFF
- VIDEO: Select V1/V2
- VOL+t: Increase volume level
- MENU: Brightness,colors,contrast settings
- MODE: Display select
- VOL-: Decrease volume level
One Year Limited Warranty
Rydeen North America Inc. (a manufacturer of “Rydeen” products) warrants the
product only to the original purchaser as described following:
Warranty Period
Rydeen warrants this product for a period of one (1) year from the original
purchase date.
Warranty Coverage
This warranty covers all defects in material and workmanship except as
specified below.
- Any products distributed outside of the USA by Rydeen North America Inc. (Rydeen) or which is not purchased in the USA or Canada unless the product is purchased through the USA Military Exchange Service.
- Any product(s) which are purchased from an unauthorized retailer (in store or online).
- Any products in which the serial number label or the model number label are removed, torn, modified or replicated.
- Any damage defects or malfunctions resulting from any of following:
a) When defect occurs during shipment of product (freight carrier’s responsibility).
b) Installation or removal of product.
c) Accidents, act of nature, misuse, abuse, neglect, unauthorized product modification or failure to follow product owner’s manual instructions.
d) Any repair or attempt to repair without RYDEEN authorization.
e) Any other cause which is not related to product defect.
f ) Any cosmetic damages due to normal wear and tear.
g) Any consumable items (such as fuse or batteries).
If any problems develop with your Rydeen products during or after the Limited Warranty Period, or if you have any questions regarding the operation or installation of the product, you should contact your Rydeen retailer. If the problem or your question is not handled to your satisfaction, please contact Rydeen Customer Service Department at 1-877-777-8811 (within the USA only) Monday – Friday between 9:00 AM to 4:00 PM Pacific Standard Time or visit www.rydeenmobile.com.
rydeenmobile.com
Rydeen North America Inc.
dba Rydeen Mobile Electronics
2/01 Plaza Del AMO, Suite 705, Torrance,California 90503 USA
Phone:1-877-777-8811
Fax:1-310-943-3778
Copyright © 2012 Rydeen North America Inc. All Rights Reserved.
RYDEEN ® is a registered trademark of Rydeen North America Inc.
These materials are protected by copyright law and international treaties. Any
unauthorized use, reproduction or distribution of these materials, or any
portion herein, will result in severe civil and criminal penalties and fines.
Violators will be prosecuted to the fullest extent of the law.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>