MONSTER Airmars XKT23 True Wireless Bluetooth Headphone Instruction Manual
- June 13, 2024
- Monster
Table of Contents
MONSTER Airmars XKT23 True Wireless Bluetooth Headphone Instruction Manual
MONSTER Airmars XKT23
Product parameters
Product Schematic Description
TIPS: When the charging box cover is closed, the RGB indicator light of the charging box flashes red, please charge the charging box.
Product operating instructions
-
Power on
Method I: Open the charging case, the headphones will turn on automatically
Method 2: Long touch the MF button of the headphones for 3s to turn on the headphones. -
Power off
Method 1: Put the headphones into the charging case ande close the cover.
Method 2: After disconnected from the Bluetooth device for 3 minutes -
Pairing
Step one: Open the charging case, the headpnones will start pairging automatically
Step two: Search and click for “Monster Airmars XKT23 “on the Bluetooth list of the smart device, and when connection is successful, “Connected”will be heard
- Headphones will try reconnecting to the device within 3 minutes when connection is lost
Restore factory settings
When you turn on the headphone, make sure it does not connect to any Bluetooth device, and click the MF button 5 times to clear the pairing record, then turn off the headphone
Precautions
- Headphones will turn on automatically(needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed
- Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging
- Keep battery(battery pack)away from inflammables or excessive heat such as direct sunlight Do not disassemble, hit, squeeze or fire Medium. If severe swelling occurs, do not continue using. Do not place in high temperature environment. Do not use after soaking water.
- Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behavior, etc
Warnings
- Do not use headphones at high volume for an extended perios of time
- Keep the headphones away from dust and water
- Do not disassemble the headphones and accessories, otherwise warranty will be voided
- Keep headphones away from any impact or vibration
- Do not use any chemical solvents or cleaning agent on the headphones
This table is compliled according to SJ/T 11364
O : Indicates that this hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in GB/T
26572
X: Indicates that this hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in
GB/T 26572
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules
Operation is subject to the following twoconditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment
The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction
FCC ID: 2A8PV-QSMXKT23
Environment Friendly Use Period(EFUP)
This logo refers to the period (10 years) during which the hazardous
substances in electronic and electrical products will not leak or mutate so
that the use of these [ substances ] will not result in any severe
environmental pollution, any bodily injury or damage to any assets
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!
Read More About This Manual & Download PDF: