Laserliner 082.038A Thermo spot One Instructions
- June 5, 2024
- Laserliner
Table of Contents
Laserliner 082.038A Thermo spot One
WARNING: Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. This document must be kept in a safe place and if the laser device is passed on, this document must be passed on with it.
General safety instructions
-
Attention: Do not look into the direct or reflected beam.
-
The laser may not get into the hands of children!
-
Do not point the laser beam towards persons.
-
If a person‘s eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the beam. -
o not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
-
The device must only be used in accordance with its intended purpose and within the scope of the specifications. Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
Thermo spot One
- Laser beam switched on
- Battery charge
- Hold function
- Measured value display
- Max. value during the measurement Display lighting
- Unit of measurement °C / °F
4 °C / °F
To set the required temperature unit, press and hold the „°C/°F“ button until
the corresponding symbol appears on the display.
Continuous measurement / Hold
For continuous measurement activate the laser (see figure) and keep the button pressed.
Release the button as soon as the target laser pinpoints the measurement location. The measured value is held.
Measurement procedure notice
This infrared temperature instrument detects the temperature of various
surfaces and materials. A built-in sensor head detects the material-specific
infrared rays emitted by every object. The amount of these emissions is
determined by the material‘s emission coefficient (0 … 1). This instrument is
permanently set to an emission coefficient of 0.95, which is applicable to
most organic materials as well as plastics, ceramics, wood, rubber and
stone. Please ensure that the space between the instrument and surface to be
measured is free of disturbances (steam, gas, contamination, glass).
Laser
The laser is a targeting aid to sight the location for the infrared
measurement. Only the surface‘s temperature is measured. Set the optimum
measuring distance for the measured spot (12:1) such that it is completely
within the target
object.
Technical data
EU directives and disposal
This device complies with all necessary standards for the free movement of
goods within the EU.
This product is an electric device and must be collected separately for
disposal according to the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info