MARIMEX Solar heating Pyramid User Manual
- June 5, 2024
- MARIMEX
Table of Contents
User Manual
INSTRUCTIONS
- Use with pumps from 2.000 to 10.000 l/h
- Always position the heater AFTER the pump and BEFORE the swimming pool: the water entering the heater should be always filtered in advance (FIG 1)
- Before the heater always install a filter to eliminate the impurities in the water.
- Connect the pump to the outer connector A (water inlet) and the swimming pool to the connector B (water outlet) (FIG 2)
- For the connections, it is possible to use Ø 32 mm and 38 mm hoses. (FIG 3)
- Suitable for swimming pools until 7500 l of water. For higher dimension swimming pools, it needs to install more heaters in series (1 every 7500 l, 4 maximum) to increase the heating effect.
- To improve the efficiency, position the heater towards the sun.
- To optimize the heater filling, tilt it AFTER having filled it with water.
WARNING
- Do not leave the heater outside during cold months (shelter it against intense cold).
- Do not stand on the heater
- Do not seat on the heater
- Do not disassemble the feeding connectors A and B
Via dell Industria, 1
42015 Correggio (RE) ITALY
www.gfgarden.it
Cod. GF33490591 – set. 2017/0
MADIN IN ITALY
www.gfgarden.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>