belkin WIZ016 Boostcharge Pro 3-In-1 MagSafe Wireless Charging Pad Instruction Manual
- June 5, 2024
- belkin
Table of Contents
belkin WIZ016 Boostcharge Pro 3-In-1 MagSafe Wireless Charging Pad
Instructions
Safety Instructions:
WARNING: Failure to follow these instructions could result in fire, electric shock. injury, or damage to the user product. or other property.
- Connect the power supply of the wireless charger into a power outlet that is close by and Is easy to disconnect from the source
- Use Indoors and in a dry location only; Avoid charging near sources of heat and humidity.
- Keep the wireless charger and power supply away from any liquids or moisture.
- Unplug the wireless charger when not in use for long periods of time.
- Do not store your device In very hot or very cold locations. It is recommended to use your device at room temperature.
- Do not use if v1s1ble defects are observed on the wireless charger or power supply
- Do not attempt to service, modify, or disassemble the wlreless charger or power supply.
- Use of a power supply not recommended or sold by Belkin may result man increased risk of fire, electric shock. injury. or damage to the user. product. or other property.
- Wireless charging power transmission rate Is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to. proprietary charging protocols. ambient temperature. current bat1ery percentage level and age of the device being charged.
CAUTION: If you experience problems with the wireless charger, please
discontinue use, unplug the power supply from the AC socket, and contact
Belkin for assistance.
The marking information is located at the bottom of apparatus.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We. Belkin lnternatlonal, Inc,. of 12045 E. Waterfront Drive. Playa Vista, CA
90094. Tel: +1 (310) 7515100. declare under our sole responsibility that the
product WIZ016, to which this declaration relates, complies w,th Part 15 of
the FCC Rules. Operation is subjtct to the following two conditions: (1) this
devlce may not cause harmful interference. and (2) this devtee must accept any
interference received, including interference that may cause undesired
operalton.
Federal Communications Commission Interference Statement
This equipment ha;, been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules These limits are
designed 10 provide reasonable protechon against harmful interference in a
residential installation.
This equipment generates. uses. and can radiate radio frequency energy. and If
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However. there Is no guarantee that
interference will not occur in a particular installation. If lhis equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user Is encouraged to try
and correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from rhat to which The receiver Is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or mod1f1cations not e11.pressly approved by the party responsible for compliance could void the user’s authority to operate this equipment,
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environmen1. This equipment should be Installed and operated with
a minimum distance of 20 cm between the radiator and your body .
Innovation, Sdence, and Economic Development Canada Statement (ISED):
This device contains license-exempt transmirter(s)/rece1ver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subiect to the following two conditions:
- This device may not cause interference.
- This device musr accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be Installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Innovation, Science and Economic Development Canada Statement:
This d1g1tal apparatus complies w,th CAN ICES-003(8) / NMB-003(8).
- Belkin International, Inc. Los Angeles, CA 90094, USA Belkin Asia Pacific Ltd. Hong Kong
- Belkin Tech Support: www.btlkm.com/support
- Made In Vietnam.
- belkin.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>