SKYDANCE E1-B Hand Sweep Sensor Switch Instruction Manual
- June 5, 2024
- SKYDANCE
Table of Contents
SKYDANCE E1-B Hand Sweep Sensor Switch
Features
- Hand Sweep Sensor Switch
- Hand sweep sensor switch, connected directly to the low voltage LED strip.
- When hand sweep, the strip turn on gradually.
- When hand sweep again, the strip turn off gradually.
- Max 4A output current, max output power 96W@24V.
- Generally installed in the aluminum lamp strip housing.
- 3M paste in the bottom of the PCBA make easy installation and security.
- Low cost and high stability.
- Widely used in table lamps, bedroom lamps, wardrobe lights, etc.
Technical Parameters
Input and Output
Input voltage| 12-24VDC
Output voltage| 12-24VDC
Output power| Max. 48W@12V Max. 96W@24V
Sensor data
Detective distance| ⩽8cm
Detevtive angle| 15-30
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Warranty and Protection
Warranty| 5 years
Protection| Reverse Polarity
Dimension
Installation attention
- Cut a hole in size L7 x H5mm on the . PC cover
- Put mini sensor switch into profiles when power is off,put the detetor head to the hole.
- Pay attention to power input and LED output polarity.
Wiring Diagram
Documents / Resources
|
SKYDANCE E1-B Hand Sweep Sensor
Switch
[pdf] Instruction Manual
E1-B, Hand Sweep Sensor Switch, E1-B Hand Sweep Sensor Switch
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>