VISA LIGHTING CB1944 Escape Lightning System Instruction Manual

June 5, 2024
VISA LIGHTING

VISA LIGHTING CB1944 Escape Lightning System Instruction Manual
VISA LIGHTING CB1944 Escape Lightning System

MOUNTING WITH JUNCTION BOX COVER

Mounting Instruction

  1. Wall plate is independently mounted over a horizontal, 2 x 4 outlet box, via wall anchors & mtg screws (by others).
  2. Note: If mounting over a 4″ octagonal junction box, JBC option (not shown) must be ordered.
  3. Wires from LED lamp plate extend through fixture housing – connect to junction box power – pushing connections into junction box.
  4. Secure fixture housing to wall plate with (2) keps nuts provided.
  5. Secure LED lamp plate to fixture housing with screws provided.
  6. Lensing material must be in place as part of the electrical enclosure.
  7. Place lens frame over lens and secure with screws provided.

  When using electrical equipment, basic safety precautions should always be followed, including the following:

  • Read all instructions carefully before installing and save for future use.
  • Make sure all connections are in accordance with the National Electrical Code and local regulations.
  • To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
  • Service should be performed by qualified personnel.
  • These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals