ECO-WORTHY 20A Lithium Battery Charger User Manual

June 15, 2024
ECO-WORTHY

ECO-WORTHY 20A Lithium Battery Charger

ECO-WORTHY-20A-Lithium-Battery-Charger-PRODUCT

12V 20A
BATTERY CHARGER

User Manual

Warning
Please use the charger in accordance with the parameters and connections in the manual, and do not disassemble it. Or we will not be liable for the resulting loss.

Notes

  1. High voltage inside the case, may cause harm to the human body. If the charger fails, please contact us. Users and non-professional maintenance staff is forbidden to open the charger.
  2. Charger should not be used where in damp, water, direct sunlight or near heat sources.
  3. Charger should be used where clean and well ventilated. Don’t sheltered inlet or outlet during charging, and make sure that both inlet and outlet have air space of at least 10cm.
  4. Charger should be used to prevent children closer and touch.
  5. Is prohibited that the charger used or stored near flammable, explosive goods.
  6. While cleaning the charger please do not wash with water, we recommend using a clean rag dipped a small amount of alcohol.

Indicator LEDs

ECO-WORTHY-20A-Lithium-Battery-Charger- \(1\)

Electronic Characteristics

No. Item Unit Min. Typ. Max. Remark
01 Input voltage Vac 90/200 110/220 130/260
02 Input power W 389
03 Constant charge voltage Vdc 14.4 14.6 14.8
04 Float voltage(for lead acid battery only) Vdc | | \
05 Constant charge current A 19 20 21
06 Charge complete current A 1.4 1.6 1.8 8%CC
07 Ripple voltage mV 200
08 Efficiency % 80 . . Full load

Charge Curve

ECO-WORTHY-20A-Lithium-Battery-Charger- \(2\)

Protection Characteristics

  • Output Over Voltage Protection
    When the charger output voltage exceeds the maximum charging voltage, the charger enters the standby state protection. It will restore to normal working condition automatically after troubleshooting.

  • Output Over Current Protection
    When the charger output current exceeds the maximum charging current, the charger enters the over current protection status. It will restore to normal working condition automatically after troubleshooting.

  • Short Circuit Protection
    When the charger has short circuit at output, the charger enters short-circuit protection status. It will restore to normal working condition automatically after troubleshooting.

Environmental

Working Conditions

  • Ambient temperature: -5°C ~+40°C;
  • RH: 5% ~95%;
  • Max. altitude: 2000 meter;
  • Cooling: UY series chargers use of forced air cooling system. Under dustless and ventilated conditions, the full load temperature rise not exceeding 40°C.

Storage Conditions

  • Ambient temperature: -40°C ~+70°C;
  • RH:0% ~95%;
  • Max. altitude: 20000 meter.

Reliability

No. Item Description Remark
01 MTBF Average operating life > 30000h 25 °C
02 Anti-vibration 5mm/50Hz/600s vibration test PASS

Safety

Insulation Characteristics

Insulation resistant| Input to output| DC500V 50MQmin (25°C, Humidity^70%)
---|---|---
Input to case| DC500V 50MQmin (25°C, Humidity^70%)
Output to case| DC500V 50MQmin (25°C, Humidity^70%)
Hi-Pot| Input to output| 1500Vac 50Hz 1 minute <10mA
Input to case| 1500Vac 50Hz 1 minute <10mA
Output to case| 500Vac 50Hz 1 minute <10mA

Support
If you met technical problems and cannot find a solution in this manual, please contact ECO-WORTHY for further assistance

Contact number

ECO-WORTHY reserves the right to change the contents of this manual without notice

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals