Bissell 7700 Series Big Green Complete User’s Guide
- June 8, 2024
- Bissell
Table of Contents
- Thanks for buying a BISSELL Big Green Complete
- Product view
- Product view
- How to use this guide
- Assembly
- Special features of your BISSELL Big Green Complete
- Operation
- Maintenance and Care
- Troubleshooting
- BISSELL Consumer Services
- Replacement parts
- Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Bissell 7700 Series Big Green Complete User’s Guide
Thanks for buying a BISSELL Big Green Complete
We’re glad you purchased a BISSELL Big Green Complete cleaning system. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Big Green Complete is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great- grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your Big Green Complete. Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be observed,
including the following: Read all instructions before using your Big GREEN
Complete
WARNING: To reduce the risk of fire, electric shock, or injury:
- Do not immerse.
- Use only on surfaces moistened by cleaning process.
- Always connect to a properly grounded outlet.
- See Grounding Instructions.
- Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
- Do not leave machine when it is plugged in.
- Do not service machine when it is plugged in.
- Do not use with damaged cord or plug.
- If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
- Use indoors only.
- Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
- Unplug by grasping the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into appliance openings, use with blocked opening, or restrict air flow.
- Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.
- Do not pick up hot or burning objects.
- Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
- Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
- Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.).
- Do not modify the 3-prong grounded plug.
- Do not allow to be used as a toy.
- Do not use for any purpose other than described in this User’s Guide.
- Do not unplug by pulling on the cord.
- Use only manufacturer’s recommended attachments.
- Always install float before any wet pick up operation.
- Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See the cleaning fluid section of this guide.
- Keep openings free of dust, lint, hair, etc.
- Do not point attachment nozzle at people or animals
- Keep appliance on a level surface.
- Turn off all controls before unplugging.
- Unplug before attaching the air powered floor TurboBrush.®
- Be extra careful when cleaning stairs.
- Close attention is necessary when used by or near children.
- Do not use without filters in place.
WARNING: The power cord on this product contains lead, a chemical known
to the State of California to cause birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
SAVE THESE INSTRUCTIONS.
This model is for household use only. Commercial use of this unit voids the
manufacturer’s warranty.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should
malfunction or break
down, grounding provides a safe path of least resistance for electrical
current, reducing the risk of
electrical shock. The cord for this appliance has an equipment-grounding
conductor and a grounding plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plugin the drawing above. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.
Product view
- Water filtrated vacuum mode
Optional Accessories:
Some or all of these may have come with your unit. These items are available for purchase. To order replacement parts, additional tools or formulas.
Product view
- Wet cleaning mode
Keep plenty of genuine BISSELL deep cleaning formulas on hand so you can clean
whenever it fits your schedule. Always use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning
solutions may harm the machine and void the warranty.
BISSELL Formulas:
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to Replacement parts section.
| | | | | |
---|---|---|---|---|---|---
48 oz. Pet Odor and Soil Removal™ Formula with Scotchgard™Protector| 43 oz. 3X
Concentrated Fiber Cleansing Formula™ with Scotchgard™ Protector| 48 oz.
Natural Orange Extract Formula with Scotchgard™ Protector| 48 oz. Fiber
Cleansing Formula™ with Scotchgard™ Protector
| 32 oz. Hard Floor Solutions™ Formula
| 48 oz. Multi-Allergen Removal™ Formula™ with Scotchgard™ Protector| 48 oz. BISSELL Lavender Essence Formula with Scotchgard™ Protector
How to use this guide
This user’s guide has been designed to help you get the utmost satisfaction
from your BISSELL
Big Green Complete. You’ll find assembly and operating instructions, safety
precautions, as well as maintenance and troubleshooting instructions. Please
read this user’s guide thoroughly before assembling your product. Pay
particular attention to the product diagram, assembly instructions, and part
names. Locate and organize all parts before assembly. Familiarize yourself
with the parts and where they go. Following this user’s guide will greatly
enhance your ability to get the most performance from your BISSELL Big Green
Complete for many years.
Warning: Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Assembly
Your Big Green Complete is easy to assemble and requires no tools:
-
Attach hose to Quick Release™ Hose Door by inserting fitted end and turning clockwise
until you hear it click into the locked position. -
Attach hose solution line to unit by inserting fitted end into the machine. Turn clockwise
until it snaps into place. -
Snap the two wand pieces together by lining up tabs with holes and clicking together. Be sure that the wand piece with the adaptor is the one you will attach to the tool to. Attach assembled wand to grip using the same technique.
-
Snap the desired tool on the end of the wand. Place wand adaptor into the wand caddy on
the side of the unit.
-
Place either tool caddy or solution tank (if wet clean mode is desired) onto the back of
the machine.
Special features of your BISSELL Big Green Complete
Your BISSELL Big Green Complete is a complete home cleaning system. Not only does it come with many unique features, it has been designed with you, the customer, in mind.
Built-in heater
Big Green Complete models all feature a patentedbuilt-in heater which heats
hot tap water up to 25 degrees hotter to safely optimize cleaning
effectiveness. The heater will never allow the cleaning solution temperature
to exceed 190 degrees. The heater switch on the back of the machine controls
the heater so you have the option to turn off the heat if you want to.
Microban®
Microban antimicrobial product protection fights the growth of odor causing
bacteria, mold and
mildew in the machine. Keeps it cleaner and fresher between uses.
Hard floor tool
BISSELL’s unique hard floor tool uses a combination of gentle scrubbing action and strong suction to clean your hard floor surfaces and leave them dry within minutes.
Hard floor microfiber pad
Soft and gentle microfiber pad is washable and re-usable, time and time again.
Tool caddy
The onboard tool caddy can be used to store any tools you are not currently using.
Cleaning tools
Your Big Green Complete comes with a variety of advanced tools, each one just right for a specific job. Some of these tools have multiple uses.
- Air powered floor TurboBrush:
Perfect for carpets and rugs, this air-powered floor TurboBrush comes with an air flow adjustor. When using on normal length carpets and rugs set the selector to Low. For especially thick or long carpet or rugs, switch the selector to High. Additional airflow will be brought in from the top of the brush in the High position.
- Multi-surface floor tool:
May be used on both carpet/rugs or hard floor surfaces. For use on carpets,
make sure the tab is in the down position . This will hide the soft outer
brushes. For hard floor surfaces, press the opposite tab in the down position
. This will engage the soft outer brushes. Crevice tool: May be used for both
dry vacuuming or wet cleaning.
_ NOTE: In wet cleaning mode the crevice tool _will spray water and
cleaning solution. Take
care not to press the trigger when in water filtrated vacuum mode.
Quick Release™ Hose Door
The handy Quick Release™ Hose Door ensures that the machine’s hose never rests on your carpet or hard floors, keeping them clean and dry while filling or emptying the tanks.
Wand caddy
Perfect for storage or when you take a break from cleaning, the wand caddy holds the grip, wands and tools firmly in place.
Operation
Vacuuming
Getting Ready
In order to maximize the cleaning and filtration power of the Big Green
Complete make sure there
is always water in the collection tank. Fill with clean tap water up to the
tank fill line. Vacuuming
without water in the collection tank will require more frequent washing of the
filters to prevent
build up of dust and other particles, which may cause damage to the motor.
-
If desired, make sure the tool caddy is in the back of the machine. Store appropriate vacuuming
tools as needed. -
Attach desired tool to end of wand (or directly to grip).
-
Remove the collection tank from the unit by opening the Quick Release Hose Door and lifting the tank straight up by the handle.
-
Remove the top lid from the collection tank and set aside.
-
Fill the collection tank to the fill line (located on side of tank) with clean, cold water.
-
Replace the top lid back onto the top of the collection tank.
-
Set the collection tank back in the machine.
-
Select “WATER FILTER VACUUM” with the mode selector.
-
Close the Quick Release Hose Door tightly until it clicks into the locked position.
-
Plug into a proper outlet and press the ON (I)/OFF (0) button down into the ON (I) position
Emptying the tank
-
Open the Quick Release™ Hose Door and remove the collection tank by lifting straight
up with the tank handle. -
Remove the top lid from the collection tank and set it aside.
-
Empty dirty water into a sink or toilet, or outside. Pour the dirty water out from the corner of the tank. Rinse out the tank thoroughly.
-
Refill the tank if needed and replace the top lid back onto the top of the collection tank.
-
Set the collection tank back in the machine.
-
Close Quick Release hose door tightly until it clicks into locked position.
-
If finished vacuuming, refer to the Maintenance and care section.
Wet cleaning
Before you clean
- Plan activities to give your carpets time to dry.
- Thoroughly dry vacuum the area to be cleaned.
- Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.
Wet cleaning
NOTE: Remove tool caddy if in place.
-
Attach the desired wet cleaning tool to end of wand or grip.
-
Open the Quick Release™ Hose Door and select “WET CLEAN” with the mode selector.
-
Place the clean solution tank on a flat surface.
-
Fill the solution tank by first unscrewing the measuring cap. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill tank to fill line with hot tap water. Add two full measuring caps of formula. Screw measuring cap tightly back onto the solution tank.
-
Place the solution tank back in the machine.
-
Make sure the float is in place. To install, slide float into the channel located on “Fill
Line” side of the collection tank. There is only one way to properly install the float. -
Plug into a proper outlet and press the ON ( I )/OFF ( 0 ), wet clean and heater (if desired)
buttons down into the ON position. Note: Allow one minute for the built-in heater to warm up before cleaning. The Big Green Complete will be fully warmed and will provide optimal performance after one minute in the heater ON position.
Carpet Cleaning
-
Attach carpet deep cleaning tool to end of wand.
-
Place carpet deep cleaning tool directly on carpet. Pull the spray trigger to spray cleaning
solution while pulling the wand towards you. -
Keeping nozzle of the carpet deep cleaning tool firmly against the carpet surface, continue to
make slow forward and backward wet passes until no more dirt can be removed. Do not overwet. -
Release spray trigger and make slow forward and backward passes over the same area to
remove any residual dirty water. -
Repeat wet cleaning passes until water being pulled up appears clean.
-
Continue passes without pressing the spray trigger until you can’t see any more water being pulled up.
-
Continue to clean entire carpet working in 3′ by 3′ sections.
-
If machine loses suction, stop spraying and check the collection tank level. Empty if necessary.
-
If the machine stops spraying turn off wet clean button immediately and check the solution tank level.
_ NOTE: Never run in wet clean mode when _the clean water formula tank is dry or missing.
When you are finished
-
Turn off the heater, wet clean, and power buttons.
-
Remove the collection tank from the unit by opening the quick release hose holder and
lifting the tank straight up by the handle. -
Remove the top lid from the collection tank and set it aside.
-
Empty dirty water into a sink, toilet or outside. Pour the dirty water out from the corner of the tank. Rinse out the tank thoroughly.
_ NOTE: You may leave the solution tank with _water and formula in it so
you are ready for
the next use.
- Allow all parts to dry before storing.
Hard floor cleaning
-
See “Getting Ready to Wet Clean”.
-
Be sure to use BISSELL Hard Floor Solutions in the solution tank for hard floor cleaning. Fill the formula tank by first unscrewing the measuring cap. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill tank to fill line with hot tap water. Add one full cap of formula. Screw measuring cap tightly back onto the solution tank.
-
Set the solution tank back in the machine.
-
Attach microfiber pad to quick dry hard floor tool byattach ing to the Velcro strips on the top of the tool.
-
Attach the hard floor tool to end of the wand.
-
Place tool directly on the hard floor surface, resting on the pad.
-
Squeeze the spray trigger to moisten the pad with cleaning solution. Caution: Do not oversaturate.
-
Move the tool back and forth across the floor to clean. Squeeze spray trigger as needed.
-
Tilt the tool forward and pull back. This will create the best suction and will help get the
hard floor surface as dry as possible. -
Continue until room is complete.
-
See “When you are finished” instructions above.
-
Be sure to remove the microfiber pad and clean it by hand or machine wash as needed. Allow it to dry completely before next use.
Upholstery cleaning
Your Big Green Complete comes with special tools for vacuuming and wet cleaning upholstery, stairs and more.
-
Important! If using to wet clean upholstery, check the upholstery tags before proceeding.
a. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your Big Green Complete. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with deep cleaning. Do not use on velvet
or silk. If manufacturer’s tag is missing or not coded, check with the furniture maker or the furniture dealer.
b. Check for colorfastness in an inconspicuous place.
c. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
d. Plan activities to allow upholstery time to dry.
e. Vacuum thoroughly. -
Refer to the “Getting Ready to Wet Clean” .
-
Attach the desired wet cleaning tool to the wand or grip.
-
Clean by pressing the spray trigger to spray solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled surface. Release the spray trigger to suction soiled water. Continue to clean the area, working in small sections, until no more dirt can be removed. Suction as needed to remove as much water as possible. Caution: Do not overwet. -
Remove and rinse tools in clean, running water. Dry and put away.
-
See “When you are finished” instructions.
Cleaning fluid section
Keep plenty of genuine BISSELL Formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
| | | | | |
---|---|---|---|---|---|---
43 oz. 3X Concentrated Fiber Cleansing Formula™ with Scotchgard™ Protector
item # 0710
| 48 oz. Fiber Cleansing Formula™ with Scotchgard™ Protector
item # 0710
| 48 oz. Multi- Allergen Removal™ Formula™ with Scotchgard™ Protector
item # 0720
| 48 oz. Pet Odor and Soil Removal™ Formula with Scotchgard™ Protector
item # 0730
| 48 oz. Natural Orange Extract Formula with Scotchgard™ Protector
item # 0740
| 48 oz. BISSELL Lavender Essence Formula with Scotchgard™ Protector
item # 0750
| 32 oz. Hard Floor Solutions™ Formula
item # 0484
WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL Deep Cleaning Formulas intended for use with the deep cleaner. Non-BISSELL cleaning formula may harm the machine and void the warranty.
Maintenance and Care
Machine storage
Once your cleaning is complete make sure the dirty water from the collection
tank is emptied. Rinse out and dry before the next use. For wet cleaning, the
solution tank can be left filled and ready to use.
_ Note: Store your Big Green Complete in a _protected dry area. Since
this product uses water it must not be stored where there is a danger of
freezing. Freezing will damage the internal components and void the
warranty.
Machine care
WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete.
-
Press all buttons OFF. Unplug the machine and wrap the cord.
-
After emptying the dirty water from the collection tank, rinse it out thoroughly with hot water. Remove all inner parts (water filtration tower and mode selector) if desired. Rinse them and allow to dry before returning into tank.
_ Note: To remove inner parts, turn mode _selector to remove. Pull mode selector straight
out towards you. The water filtration tower can now be taken out through the top of the tank. -
For wet cleaning, remove and clean all tools that were used. Allow to dry before storing.
-
Remove the hose, taking care to keep both ends up to avoid spilling. Dump out any remaining water and flush clean with hot tap water. Allow to dry before storing.
-
a. Pre-motor filter:
Take apart the top lid by pulling the tab away from the separator. Inspect the foam filter. If dirty, rinse clean and allow to dry before returning it to the machine. Re-assemble the top lid by placing the filter in its spot and re- attaching the separator. Use care to make sure the “T” pieces are lined up under the shallow grooves on the top lid itself. For replacement of this part see replacement parts section.
b. HEPA Media filter:
This filter is located at the back of the machine, underneath the Quick Release Cord Wrap. Use one finger to depress the latch and pull the door down. Open towards you and down to the ground. Use two hands to remove the filter from its slot. If dirty, rinse clean and allow to dry before returning it to the machine. Make sure the filter door is fully closed prior to operating the machine. For replacement of this filter see Replacement Parts section.
Troubleshooting
Reduce Spray or No Spray
Possible | Cause Remedies |
---|---|
Make sure power is on | Press power button if needed |
Solution tank may be empty | Fill tank according to directions |
Tank may not be seated properly | Turn ON/OFF, heater and wet clean button off. |
Remove and reseat tank
Hose solution line may be disconnected| Check connection at front of machine
Wet clean is not turned on| Depress wet clean button to turn on
Machine is not suctioning
Possible Cause | Remedies |
---|---|
Collection tank may not be placed properly | Open Quick Release™ Hose Door, |
lift out tank and re-seat. Re-latch Quick Release™ Hose Door
Collection tank may not be| Check to make sure the top lid is assembled
properly properly seated
Wand tool connections are not tight| Check all connections (At grip, wand and
tool) Push tight if necessary
Collection tank is full| Empty collection tank by following instructions in
Emptying the tank.
Float has tripped| Check to see if tank needs to be emptied. Make sure float
is down towards bottom of tank
Pre-motor filter is dirty| Remove top lid. Remove and clean pre-motor filter
. Filter must be completely dry before using again
Built-in heater light does not illuminate
Possible Cause | Remedies |
---|---|
The heater button has not been depressed | Depress the heater button |
The ON/OFF button has not been depressed | Depress the ON/OFF button |
Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your
warranty, |
Call: BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 a.m. — 10 p.m. EST
Saturday 9 a.m. — 8 p.m. EST
Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website – www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number:
Please record your Purchase Date:
NOTE: Please keep your original sales receipt. It provides proof of
date of purchase in the event of a warranty claim. See Warranty for details.
Please register your new BISSELL product at www.bissell.com/productregistration
Replacement parts
- BISSELL Big Green Complete
Below a list of common replacement parts*. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired.
Item Part No. Part Name
1 203-7063 M ulti-Surface Floor Tool
2 203-7064 Air Powered Floor TurboBrush
3 203-7073 5″ Brush
4 203-7066 Wand
5 203-7067 Adaptor
6 203-7068 Crevice Tool
7 203-7069 Dust Brush
8 203-7070 Carpet Deep Cleaning Tool
9 203-7071 Carpet Deep Cleaning Tool Brush Strip
10 203-7072 Carpet Deep Cleaning Tool Adaptor
11 203-7065 4″ Upholstery Tool
12 203-7074 Quick Dry Hard Floor Tool (pads not included)
13 203-7076 Hard Floor Microfiber Pads (2 Pack)
14 203-7077 Drain Cleaner
15 203-7078 Tool Caddy
16 203-7079 Hose Grip Assembly
17 203-7080 Measuring Cap
18 203-7082 Pre-Motor Filter
19 203-7083 HEPA Media Filter
20 203-7084 Solution Tank
21 203-7085 Small cap/insert
22 203-7086 HEPA Filter Door
23 203-7087 Float
24 203-7088 Diverter
25 203-7089 Water Filtration Tower
26 203-7090 Water Filtration Tower Gasket
27 203-7091 Separator with Filter
28 203-7092 Top Lid Assembly
29 203-7093 Lid
30 203-7094 Collection Tank w/Microban
31 203-7095 Collection Tank Assembly w/Microban
32 203-7098 Motor Duct Gasket
33 203-7099 Quick Release™ Hose Door™ Assembly
34 203-7100 Carry Handle Assembly
35 203-7102 Caster Wheel
36 0716 3X Concentrated Fiber Cleansing Formula 48 oz.
37 710A Fiber Cleansing Formula 48 oz.
38 720A Multi-Allergen Removal Formula 48 oz.
39 730A Pet Odor and Soil Removal Formula 48 oz.
40 0740 Natural Orange Extract Formula 48 oz.
41 0750 Lavender Essence Formula 48 oz.
42 0484 Hard Floor Solutions 32 oz.
*Not all parts are included with every model.
Warranty
- BISSELL Big Green Complete
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to
state. If you need additional instruction regarding this warranty or have
questions regarding what it may cover,
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail
as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of
the product BISSELL
Homecare, Inc. will repair or replace (with new or remanufactured components
or products), at BISSELL’s option,
free of charge from the date of purchase by the original purchaser, for one
year any defective or
malfunctioning part.
See information below on “If your BISSELL product should require service”.
This warranty applies to product used for personal, and not commercial or
rental service. This warranty does not apply
to fans or routine maintenance components such as filters, belts, or brushes.
Damage or malfunction caused by negligence,
abuse, neglect, unauthorized repair, or any other use not in accordance with
the User’s Guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service
Center in your area. If you need information about repairs or replacement
parts, or if you have questions about your warranty,
contact BISSELL Consumer Services.
Website or E-mail:www.bissell.com Use the
“Customer Services” tab.
Or Call: BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 a.m. – 10 p.m. ET
Saturday 9 a.m. – 8 p.m. ET
Or write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY
WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply
to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS
DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts, so
the
above limitation may not apply to you.
Bissell 7700 Series Big Green Complete User’s Guide – Download
[optimized]
Bissell 7700 Series Big Green Complete User’s Guide –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>