BLOW BG700 3 Axis Foldable Gimbal User Manual

BLOW BG700 3 Axis Foldable Gimbal

Quick Start

1. Install the tripod to gimbal.
2. Remove the phone case before installation, keep the phone screen horizontal and the phone camera facing left. Pull the smartphone holder and put the phone into it. Make sure the smartphone is in the middle of the holder.

Power ON/Power OFF

Press the power button for one (~1) second to power on/off.

Connect to the Bluetooth when using native camera

Power on the gimbal, open the Bluetooth on the phone, go into the smartphone Bluetooth setting page, find and choose the device: „GP7-XXX” when XXX are unical for each gimbal. Gimbal will connect with native camera. For more functions download the app „Gimbal Pro”.

Instruction for 4 modes

To change the gimbal’s operating mode, press mode button. The led indicator informs about the current operating mode of the gimbal. All Follow(AF): The Roll axis is locked, the Pan (left/right) and Tilt (up/down) will follow the movement of handle.

Half Follow(HF): Tilt & Roll are locked. Pan axis rotates smoothly with the handle.

Default working mode

• Lock Full( Pan, Tilt, Roll axis are all locked. The camera remains still and stable, which means the camera cannot follow the movement of the handle
• First person view( Pan, Tilt, Roll axis follow the movement of the handle.

Get to know BG700

Indicator of gimbal and others

Bluetooth indicators

• Slow flashing – Bluetooth is not connected,
• Fast flashing – Bluetooth is connecting,
• Light is on -Bluetooth is connected

Joystick

Push the joystick to control gimbal movement.

4 modes of working

• AF – All Follow
• HF – Half Follow Relevant indicators indicate
• LF – Lock Full current operating mode
• FPV – First person view

Mode button

• Single press —— Switch between four modes,
• Double press ——Smartphone back to center.

Charging port

• Charge for gimbal.

Indicators of charging

4 indicators| 3 indicators| 2 indicators| 1 indicator
---|---|---|---
Estimated       level battery: 76%-100%| Estimated       level

battery: 50%-75%

| Estimated       level

battery: 26%-49%

| Estimated       level

battery:    1%-25%

Power button

• Single press —— Switch horizontal & vertical mode/Restart gimbal when gimbal is stuck
• Press for one second(1 sek) —— Power on/off
• Double press —— Switch photo/video mode (Bluetooth is connected, use in Gimbal Pro app)
• Triple press —— Switch camera between front/rear (Bluetooth is connected, use in Gimbal Pro app)

Shutter button

• Single press —— Single shot or start/stop the video recording (Bluetooth is connected)
• Double press ——Suspend/recover the recording (Bluetooth is connected, use in Gimbal Pro app)
• Triple press —— Capture pictures during recording (Bluetooth is connected, use in Gimbal Pro app)

ZOOM button

Push the slider up/down to zoom in and out. (Bluetooth is connected, use in Gimbal Pro app)

Reseting bluetooth

Press the sutter button and power button at the same time. New phone can do quick connect.

Underslung mode

Hold the gimbal upside down to enter underslung mode, in order to capture image from low position.

Side grip mode

Rotate gimbal to the right or left by 90° to go from upright side grip mode. Can work with landscape and portrait modes.

Charging

Gimbal supports fast charging. Suggest using 5V/2A adapter to charge the gimbal.

Gimbal supports charging and using in the same time.

App Gimbal Pro
Gimbal supports a native camera but can do only basic stable shooting without App. If You want to use more functions (such as zoom, panoramic, tracking and time-lapse), need to download and use the app.

Downloading Gimbal Pro
Scan the QR code or search „Gimbal Pro” (or Gimbal Pro2 in the Play Store) manually. Qr code supports two systems, then You can choose a version for You. Gimbal Pro requires a minimum of iOS 10.0. For Android minimum of 6.0

Connecting with Bluetooth

1. Go to the setting page on the smartphone,
2. Go to Bluetooth setting, find and click the device name „GP7_XX”. The below picture will show up, click pair and it will work after connect successfully

Product specification

Compatible smartphone

| Diagonal : ≤180 mm Width: 55-90 mm

Thickness: ≤ 9.5 mm

Working currency| 150~3000mA
Gimbal dimension| Unfold: 26013088 [mm]

Fold: 15211046,6 [mm]

Charging time| 80 minutes (using 5V/2A charger)
Working time| 4-5 h
Face tracking| Yes, in app
App| Yes, Gimbal Pro ( or Gimbal Pro2 for Android)
Input voltage| 5V
Input currency| 2A

Cautions

1. Ensure the motor rotation is not blocked by external force.
2. Please do not contact with sea water or corrosive liquid.
3. Please do not disassemble the stabilizer.
4. If the motor works continuously for a long time, the Surface temperature of the motor may be higher than usual.
5. It is strictly forbidden to drop or collide with the stabilizer.
6. It is forbidden to put the product near the heat source (furnace, heater) and in the ar at hot weather.
7. Store the product in a dry environment.
8. Do not overcharge od discharge the baterry, otherwise the battery cel wil be damaged.

Declaration of conformity

Company Prolech sp. z o.o., Stary Puznów 58B, 08-400 Garwolin, Polska declares that, the product Gimbal BG700 brand BLOW, product code: 79-153# is compliant withe the directives: 2011/65/EU, (EU) 2015/863, 2014/30/EU.
Full text about EU declaration is available at the company’s headquarters or can be downloaded from the website: www.prolech.com.pl
Made in CH.R.L for company Prolech sp. z o.o.
More info about product You will find on
www.blow.pl or www.prolech.com.pl

References

• BLOW | Sklep internetowy
• BLOW | Sklep internetowy
• Prolech Importer Sprzętu Elektronicznego
• Prolech Importer Sprzętu Elektronicznego

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>