MOD LIGHTING Skye Modern Outdoor Lantern Installation Guide
- June 1, 2024
- MOD LIGHTING
Table of Contents
MOD LIGHTING Skye Modern Outdoor Lantern
Skye Installation Guide
Modern Outdoor Lamp
- Step 1: Drill holes according to the base plate hole spacing.
- Step 2: Embed the expansion screws into the intended holes to fix it to the floor.
Design Drawing
Installation Notes:
-
Remember to perform a test by connecting the wires to the power supply before installing the fixture to the ceiling.
If there are any problems, please contact us before performing the installation process. -
The electricity must be powered off before installation or cleaning.
-
Please wear gloves during the installation process to avoid scratches.
Precautions and Maintenance
- The solar panel should be installed in a location where it receives direct sunlight. Otherwise, insufficient charging may occur.
- During installation, avoid scratching the surface of the lamp and the wires. Wear gloves when installing.
- Avoid frequently switching the power supply during the use of the lamp to prevent damage to the lamp.
- After installing the lamp, please read the remote control user manual carefully.
- If the lamp does not turn on, it may be due to low battery power. Charge the lamp under sunlight before use.
- The operating temperature range for the solar system is – 15°C to 70°C. The system will not work if it exceeds this range.
- The lamp head has light-sensing capability. Ensure that no other light source covers the solar panel. Even if the lamp has power, it will not light up.
To ensure safety, the installation of this lamp must be carried out by professionals. All bolts, nuts, and screws subjected to force must be tightened securely.
REMOTE CONTROL INSTRUCTIONS
Remote Control Instructions
Instructions
- Before using the remote control, please remove the transparent partition.
- The remote control is not effective during the daytime and can only be used at night.
- The timed light-on duration and brightness level have a memory function. After turning off the light, when it is turned on again, it will execute the previous timed light-on duration and brightness level. This repeats daily.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>