HEXAGON BT Controller Owner’s Manual
- June 10, 2024
- HEXAGON
Table of Contents
- HEXAGON BT Controller Owner’s Manual
- HEXAGON BT Controller Specification
- FEATURE
- The 3.5mm Jack Audio Output
- Sleep mode
- LED Indication
- Bluetooth Connection:
- Wired Connection:
- Multi setup RGB Light:
- Correspondence of Standard PS4 and PC buttons (Chart).
- Trouble Shooting
- Cautions
- Read More About This Manual & Download PDF
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HEXAGON BT Controller Owner’s Manual
HEXAGON BT Controller Specification
FEATURE
HEXAGON BT Controller Specification
Compatible with PS4,PS3 and PC D-input and Android( above 6.0) Can play PS4
games on PS5 Console
With audio output With Motion sensor
With Vibration-(Cell Motor) Without turbo Function
Built-in 600mAh /900mAh /1200mAh Li-ion battery
Including Home, Share, Options, D-pad, Circle,Triangle,Square,Cross, L1, R1,L2
, R2 ,2 Joysticks, 2 Triggers and reset button
With upgradable firmware by USB
With Mapped X-Y Touch pad and Click Button
Interchangeable custom shapes for D-pad and Analogue Stick built-in magnets
The front LED bar is white color only
80cm Type C charging cable
Support the game sound and voice chat Multi setup RGB LED Light Image
The 3.5mm Jack Audio Output
Support the game sound and voice chat
Sleep mode
The controller enters into Sleep mode if fail to connect with PS4 console
after 30 seconds searching mode or no buttons are active for 10 minutes or no
obvious movement of 3D analog for 10 minutes.
By pressing Home button to wake up the controller again
LED Indication
When controller is connected to the console, the LED is white Stand-by mode:
white LED is on
Charge while playing : white Led is in breathing mode
Charge while in stand-by mode: white LED is in breathing mode, and light goes
off when fully charged Controller disconnection: white LED is off
The white Led indicators will enter into breathing light mode if the
controller is charging under power off status; The LED light goes off when
controller is fully charged.
Bluetooth Connection:
- PS3/PS4/PS5 Console
When connecting with PS3/PS4/PS5 console for the first time, one Type C data
cable is required to connect the controller to the console.
For subsequent use, only need to press HOME button one time, the white LED
will blinking slowly, the connection is successful when the white LED stop
blinking
- When connecting with PC, open the bluetooth on the PC, click to add new BT device, then keep pressing HOME+ SHARE until you see the “wireless controller” device name, click to connect with the controller. The white LED is blinking during When the LED stop blinking, the wireless connection is successful
- When connecting with Android system, open the bluetooth on smartphone , then keep pressing HOME+ SHARE of gamepad until you see the “Wireless Controller” device name on the bluetooth device list, click to connect with the The white LED is blinking slowly during connection. When the LED stop blinking, the wireless connection is successful
For subsequent use, only need to press HOME button one time, the white LED
will blinking slowly, the connection is successful when the white LED stop
blinking
Available games: Games under Android standard protocol and downloaded games
from http://www.putaogame.comPS: Keep the gamepad
powered off during connecting with Android system
Without vibration and motion sensor on games downloaded from
http://www.putaogame.com/
Wired Connection:
Also can connect to the PS4, PS3 console and PC by cable
On PC platform, you can switch the PC mode from X-input to D-input by pressing
HOME button 5 times
Multi setup RGB Light:
1: How to Switch on the RGB Light? Pressing L1 and R1 for 5 seconds
2: How to Switch off the RGB Light? Pressing L1 and R1 for 5 seconds
3: How many light modes?
The lights modes are mainly divided into four groups of light display modes:
- Fixed color mode including 8 colors that’s white-red-orange-yellow-green-cyan-blue-purple. By pressing the Home +
Triangle buttons to enter this LED light mode and change the colors among 8 colors
- Fixed color breathing mode including 8 colors that’s white-red-orange-yellow-green-cyan-blue-purple. By pressin
- Colorful gradient mode . By pressing the Home + cross buttons to enter this LED light mode
- Rainbow running light mode.By pressing the Home + circle buttons to enter this LED light mode 4: When turn on the controller, the default RGB is mode d
Correspondence of Standard PS4 and PC buttons (Chart).
PS4| □| ×| O| △| L1| R1| L2| R2|
SHARE| OPTION| L3| R3| PS| T-PAD
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
PC-D-input| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10|
11| 12| 13| 14
Trouble Shooting
- If the connection between the controller and the wheel is failed, please re-connect the original controller again and retry
- If the wheel does not work, turn off and turn on again the console and follow the GUIDE procedure again
Cautions
- Please carefully read this instruction manual before using this racing wheel
- Do not hit or drop it
- Do not disassemble, modify, or try to repair the wheel by yourself or in any non-authorized service center
- Do not store the wheel into a humid, hot, or greasy place
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Read More About This Manual & Download PDF
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>