CAL-ROYAL DSR-408 Door Shoes Rain Drip Instruction Manual
- June 5, 2024
- CAL-ROYAL
Table of Contents
CAL-ROYAL DSR-408 Door Shoes Rain Drip
Installation Guidelines:
LENGTH: 36″ & 48″ VINYL SEAL INSERT MILL ALUMINUM & DURO FINISH
- Remove the door if necessary to prepare the bottom of the door prior to installation of door shoe.
- Measure, mark, and trim door shoe exact to the full width of the door. Trim seal 1/16” longer than trimmed door shoe on each end. Crimp ends to secure insert.
- Drill pilot holes in header stop for the screw at marks.
- Slide door shoe in place and insert screws. Adjust to ensure light even contact with threshold. Fasten the screws.
Tools Required:
- Power tool drill
- Marker
- Measuring tape
- Screw driver
- Cutting tools (Miter saw, circular saw, hacksaw, & plier)
Important Reminder: Always use appropriate Personal Protective Equipment (PPE) during installation.
Packaging includes:
Screws for wood and metal doors
Wood doors – #6 x 5/8″
metal doors -#6 x 5/8″
6605 Flotilla Street, City of Commerce, CA 90040 U.S.A. | Website: www.cal- royal.com | Email: sales@cal-royal.com Phone: 323-888-6601 ; 800-876-9258 | Fax: 323-888-6699 ; 800-222-3316
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>